Your home is filled with interconnected systems and units that can affect one another. If one system fails, others could follow. Catch problems early with help from Action Plumbing, Heating, A/C & Electric.
Our crew has the tools and talents needed to resolve various problems. Our plumbers, HVAC experts, and electricians know the ins and outs of all major home systems. We’ll determine why your units are failing and provide a repair or replacement that fits the situation.
Take good care of your home and its many systems, appliances, and units. Contact Action online or call (608)-837-3638 to get started.
Air Conditioning Services
Even in Wisconsin, it can become warm during the summer months. Make sure you have a top-quality air conditioner for the next big heat wave.
Action provides cooling services for clients throughout the Madison region. We work on central air conditioners, ductless mini-splits, and heat pump systems. Our crew can perform the repairs or maintenance you need, or we can swap out your old unit for a brand-new, energy-efficient model.
Keep your cool with help from Action. Call (608)-837-3638 or contact us online to schedule air conditioner services in Madison, WI.
Need help?
608-837-3638Heating Services
It’s vital that you have a proper heating unit installed at your Madison home. Without consistent heating for your home, you could end up with burst pipes and dangerous living conditions. Action can provide the furnace, boiler, or fireplace services you need to keep warm.
All heating systems will eventually need servicing. You may need the help of a professional HVAC technician if:
- Your furnace pilot light is yellow instead of blue
- Your boiler doesn’t seem to warm your home evenly
- Your gas fireplace emits a gas smell
Don’t ignore signs of heating unit issues. Call Action today at (608)-837-3638 to schedule repairs, maintenance, or replacement of your furnace, boiler, or fireplace.
Indoor Air Quality Services
The air quality inside your home can be twice as bad as outdoor air quality. Make sure you’re breathing the cleanest air possible by scheduling indoor air quality services from Action.
Our team works on various indoor air quality systems, installing and maintaining these units to provide you with clean, healthy air. Turn to us for:
- Humidifier installation and repair
- Dehumidifier installation and repair
- UV light installation and repair
- High-efficiency air filters
- Air duct cleaning service
With the right tools, you could experience fewer allergies and respiratory problems. Contact Action online or call (608)-837-3638 to discuss your indoor air quality improvement options.
Plumbing Services
Plumbing is an essential part of your everyday life. When any part of your plumbing is broken, you need the experts at Action to resolve the issues. Our crew offers:
- Sewer line and drain cleaning
- Sump pump services
- Water heater installation
- Water softener installation
- Water filtration systems
- Emergency plumbing
Ensure you always have access to clean water, hot water, and functional drains. Call the Action team at (608)-837-3638 to schedule plumbing services in Madison, WI.
Electrical Services
Electricity powers up nearly everything in your home. If your electrical system doesn’t work right, you could have no power for your essential systems or even a fire hazard. Turn to Action for electrical services.
The team at Action provides various electrical services, from panel upgrades and dedicated circuits to light installation and equipment hookups. Our staff will make sure that you have safe, reliable electricity.
Don’t try to handle electrical problems on your own. Contact Action online or call (608)-837-3638 to discuss your need for electrical services.
Schedule Service in Madison, WI Now
Action is dedicated to ensuring that the customer is satisfied with the work. For decades, our crew has been driven by a passion for service, and we work hard to ensure that your systems work perfectly. Our family-owned company will do whatever it takes to provide our customers get the necessary service and repairs.
For reliable and trustworthy service, look no further than Action. Call (608)-837-3638 or contact us online to get started on the repairs or replacement services you need most.
FAQs
How long does a repair take to complete?
Depending on the system and the needed repair, most repairs will only take a few hours on a single visit.
Do I need a new unit installed?
Depending on the type of system that needs replacing, you may or may not need a new unit. Our technicians will try to repair your systems before deciding that a replacement is required.
Recent Jobs and Reviews in Madison, WI
Job Locations and Reviews
Completed furnace tune-up on 15-year-old unit that was experiencing operational issues. Performed combustion analysis using UEi CO55 analyzer, which showed carbon monoxide reading of 1.1 ppm within acceptable range. Found severely dirty air filter with significant debris accumulation causing restricted airflow, which was likely contributing to reported performance problems. Advised homeowner to replace filters regularly to prevent future issues and maintain system efficiency.
Responded to no-heat call on Carrier furnace system. Replaced thermostat batteries, cleaned condensate trap to remove blockage, and cleaned flame sensor. Verified proper ignition sequence and confirmed unit achieved stable combustion and normal heating operation upon completion.
Responded to building overheating issue caused by malfunctioning zone valve control on baseboard heating system. Diagnosed miswired thermostat connections causing zone valve actuator to continuously rotate, preventing proper temperature regulation throughout the building. Disconnected faulty zone valve and two thermostats from the system to restore proper heating control and eliminate overheating condition.
# HVAC Service Report - Furnace Inspection Responded to service call regarding suspected heat exchanger crack and potential carbon monoxide presence in residence. Performed comprehensive furnace inspection using video scope equipment to examine heat exchanger for cracks or failures. Visual inspection revealed rust accumulation on heat exchanger components but confirmed no visible cracks or breaches present. Inspected blower cabinet and verified no water infiltration or moisture damage in compartment. Conducted carbon monoxide testing throughout living space to verify safe levels. Extended safety inspection to include water heater and kitchen range appliances to identify any potential CO sources. Verified proper combustion and venting on all fuel-burning appliances. Confirmed residence ventilation adequate with no excessive air sealing causing combustion air deficiency. Carbon monoxide readings measured at two parts per million, which falls within safe acceptable range. Documented fi
# Service Report Responded to service call for boiler not operating following installation completed previous week. Upon arrival, accessed control panel and performed comprehensive diagnostic of electrical system and safety controls. Identified wiring connection issues affecting proper system operation. Verified and corrected all wire terminations at control board, transformer, relay, and gas valve connections. Ensured proper wire routing and secure connections throughout control panel using appropriate wire nuts. Tested all safety interlocks and limit controls for proper operation. Verified gas valve functionality and control signal integrity. Cycled system through multiple heating cycles to confirm reliable ignition sequence and burner operation. All components now functioning within manufacturer specifications. System operational and customer informed of proper operation procedures.
Responded to service call regarding humidifier leak. Performed thorough cleaning of humidifier components and replaced panel. Conducted temperature differential testing with digital thermometers, confirming proper system operation with readings of 124.3°F and 123°F.
Responded to no-heat emergency call for 10+ year old gas furnace. Upon inspection, identified significant corrosion on heat exchanger and deteriorated gas valve/thermocouple assembly. Replaced faulty components and verified proper ignition sequence, restoring heat functionality. Recommended system evaluation for potential replacement due to age and visible metal deterioration.
Responded to E00 ignition lockout code on Goodman furnace system with no heat complaint. Diagnosed issue with collector box pressure switch, cleared blocked port and replaced faulty switch to restore proper system operation.
Responded to service call for furnace displaying PF trouble code with no heat. Diagnosed issues with flame sensor and leaking drain tube. Performed thorough cleaning of flame sensor to restore proper operation and ordered replacement drain tube to address condensate leak. Inspection revealed significant corrosion on internal components and dust accumulation on wiring system requiring attention.
Responded to no-heat call for trailer home furnace with flashing indicator lights. Diagnostic testing revealed faulty ignitor preventing furnace operation. Successfully replaced ignitor component, restoring proper ignition sequence and heat function. Visual inspection of ductwork showed normal wear with no significant issues affecting system performance.
Responded to no heat call. Diagnosed system, cleaned flame sensor and cleared pressure switch ports to restore proper operation. Cycled furnace multiple times to verify repair. Noted significant rust in chimney and recommended liner installation. Identified humidifier issues requiring new valve and water feed line replacement due to previous leak.
Performed furnace cleaning and diagnostic check on gas heating system. Combustion analysis completed with UEi C161 analyzer showing optimal readings: 8.7% CO2, 5.8% O2, and excellent combustion efficiency at 95.2%. System now operating within manufacturer specifications with proper temperature output.
Responded to no heat complaint on oil furnace. Diagnosed issue with bad nozzle. Replaced nozzle which successfully restored system operation.
Responded to service call for non-functioning Empire wall heater in greenhouse. Diagnosed unit displaying A1 flash code. Successfully restored heat by resetting control panel and restarting the unit.
Responded to a no-heat service call on a Lennox furnace installed in November. Diagnosed issue with flame sensor, which was cleaned to restore proper heating function. Customer reported heat had resumed operation prior to arrival but requested inspection to ensure system reliability.
Replaced defective zone valve pop top in boiler heating system, requiring complete removal and installation of new component. Electrical connections were rewired to ensure proper functionality. Customer was advised of existing leaks in the system that may require future attention.
Responded to no heat complaint where furnace was not consistently igniting. Diagnosed dirty flame sensor as the root cause. Cleaned flame sensor thoroughly, resulting in restored operation and proper heat output, verified with digital temperature readings.
Inspected power vent water heater due to customer-reported noise issues occurring since installation by third party. Evaluated possible water hammer in upstairs bathroom and identified plumbing irregularities around p-trap in main floor bathroom causing drain noise and pipe expansion. Documented Bradford White automatic storage water heater specifications and safety information for reference.
Responded to no heat call for Bryant furnace showing 3 fast/1 slow error code. Diagnostic testing revealed temperature differential of 33.3°F (102.3°F supply, 69.0°F return). Located and cleared plugged condensate drain, restoring normal system operation and heat function.
Responded to no heat call for an Action boiler system. Diagnosed issue as a clogged condensate trap causing system failure. Service included cleaning the condensate trap and igniter, restoring proper boiler operation and heat to the residence.
