A century-old home near the Madison isthmus can have very different plumbing, heating, cooling, and electrical needs than a newer property on the far west side. Older homes around Williamson Street, Tenney-Lapham, Marquette, and Vilas may still rely on boilers, aging piping, older panels, or retrofitted cooling systems, while newer homes are more likely to need support for heat pumps, EV chargers, and higher electrical loads. Action Plumbing, Heating, AC & Electric has served the Madison area since 1989 and maintains a local presence on South Midvale Boulevard.
Our technicians provide heating, air conditioning, plumbing, and electrical services throughout Madison, including ZIP codes 53703, 53704, 53705, 53711, 53713, 53714, 53715, 53716, 53717, 53718, and 53719. Whether you have an unexpected breakdown or are planning an upgrade, call Action at (608)-837-3638 or contact us online to schedule service in Madison, WI.
Local Home Services for Madison Properties
Madison’s housing stock changes considerably from one side of the city to another. Pre-1940 homes are concentrated around the isthmus and older central neighborhoods, while areas farther from downtown contain large numbers of homes built from the 1950s through the 1970s. Continued expansion toward Madison’s outer edges has also introduced newer construction with different HVAC, plumbing, and electrical demands.
That variety matters when diagnosing problems or planning upgrades. An older property near Atwood Avenue may have gone through several rounds of plumbing or electrical modifications, while a west-side home may be approaching replacement age for its furnace, central air conditioner, or panel. Action’s local Madison presence gives homeowners access to a team familiar with systems found throughout the city and surrounding Dane County communities.
Need help?
608-837-3638Air Conditioning Services in Madison, WI
Madison summers can bring hot, humid stretches that place heavy demands on cooling equipment. Older homes around the isthmus, Marquette, Tenney-Lapham, and Vilas can be especially challenging because many were built before modern duct systems and whole-home cooling became standard. Action services traditional central air systems, ductless mini-splits, and heat pumps for homes across the city.
Our Madison cooling services include:
- 24/7 emergency AC repair during Madison heat waves
- Air conditioning installation for older and newer homes
- Air conditioning repair
- Preventive AC maintenance before July and August heat
- Central air conditioning
- Ductless mini-splits for older Madison properties
- Heat pumps for efficient year-round comfort
- Indoor air quality services
- Commercial air conditioning throughout Madison
Heating Services in Madison, WI
Madison heating systems have to perform through long winters, repeated freezes, and cold snaps that can send temperatures well below freezing. Furnaces are common throughout the city, but boilers remain part of the housing landscape in older neighborhoods near Williamson Street, Marquette, Tenney-Lapham, and the isthmus. Heat pumps are also becoming a stronger option for homeowners interested in efficiency and electrification.
Action provides:
- Emergency heating repair during Wisconsin cold snaps
- Heating installation for Madison homes
- Heating maintenance before winter arrives
- Heating repair
- Furnace repair and replacement
- Boiler service for older Madison properties
- Gas fireplace service
- Heat pump installation and replacement
- Heat pump repair
- Heat pump maintenance
- Indoor air quality services for dry winter conditions
Plumbing Services in Madison, WI
Madison’s plumbing needs are shaped by housing age, groundwater conditions, and naturally hard municipal water. Homes near downtown, UW-Madison, and the near east side may contain piping that has been repaired, replaced, or modified several times, while mid-century homes throughout the city are also reaching an age where original pipes, drains, fixtures, and water heaters may need attention. Mineral-heavy water can also contribute to scale inside water heaters, fixtures, and water-using appliances.
Our plumbing services include:
- Emergency plumbing throughout Madison
- Plumbing repair for older and newer homes
- Leak detection for aging Madison plumbing systems
- Kitchen plumbing
- Bathroom plumbing
- Faucets and fixtures
- Commercial plumbing
- Gas lines
- Sewer and drain services
- Water heater repair and replacement
- Water softeners for Madison’s hard water
- Water filtration
- Piping and repiping for older homes
- Pipe replacement and repair
- Well systems in surrounding Dane County areas
Properties near Lake Mendota, Lake Monona, and the Yahara River corridor can also face drainage concerns during spring thaw and periods of heavy rainfall. Saturated soil and higher groundwater levels can place more pressure on basement drainage and sump systems, while aging plumbing can be more vulnerable to leaks or failures. Professional leak detection, drain service, pipe repair, and water treatment can help address those issues before they become larger problems.
Electrical Services in Madison, WI
Madison homes are being asked to support more electrical demand than ever before. Older properties were never designed for today’s combination of central air conditioning, EV chargers, heat pumps, home offices, large appliances, and connected electronics. In established neighborhoods, that can make electrical capacity just as important as the condition of the equipment being installed.
Action’s electrical services include:
- Generators for Madison power outages
- EV charger installation for home charging
- Whole-home surge protection for storm season
- Electrical service upgrades for older homes
- Meter base and panel changes
- Interior and exterior lighting
- Dedicated circuits and outlets for modern equipment
- Equipment hookup and repair
- Commercial electrical services throughout Madison
For help planning an electrical upgrade, HVAC replacement, or another project that involves multiple systems, call (608)-837-3638 or contact Action online.
Why Madison Homeowners Choose Action
Action has served Madison and the surrounding area since 1989. That experience spans decades of neighborhood growth, changing building systems, and new home technology. The company also maintains a local Madison presence on South Midvale Boulevard.
Homeowners can turn to Action for:
- 24/7 emergency service
- Plumbing, HVAC, and electrical expertise
- Licensed and insured technicians
- Upfront pricing
- Same-day water heater installation when available
- A 100% customer satisfaction guarantee
- Local service backed by decades of experience
Our goal is to identify the problem clearly, explain the available options, and provide a solution that makes sense for the home. That approach is especially important in Madison, where a house near Capitol Square can have very different systems and service needs than a newer property several miles west or east.
What Madison, WI Customers Say About Action
Jeff K.
“Ethan R and his partner installed a new hot water heater. It was done well and took approximately an hour. The area was left well cleaned. Very happy with the service.”
Massitan C.
“I will recommend Rodney’s service for his professional skills, expertise and friendliness. He was able to narrow our issue down to the exact location. His expertise and knowledge allowed us to solve an eight weeks on going issue in less than 2 hours. We paid a fraction of the projected price based on phone calls to similar businesses in our area. We were satisfied beyond our expectations.”
Abraham D.
“Riley and Stone arrived exactly at 8 AM and did a great job getting the new furnace installed. They were both professional, personable, and polite. I’m glad I called Action to get a second quote on the new furnace as it was $3K less than other competitor while still including everything that the original estimate covered. Thanks, guys!”
Schedule Plumbing, HVAC or Electrical Service in Madison, WI
A Madison home near Lake Monona may need help with drainage or aging plumbing, while an older property near the isthmus may be dealing with boiler heat, dated electrical infrastructure, or cooling challenges. Homes farther west and east may be approaching furnace or AC replacement or preparing for newer upgrades such as heat pumps and EV chargers.
Action Plumbing, Heating, AC & Electric has served the Madison area since 1989 and provides plumbing, heating, air conditioning, and electrical services throughout the city. Whether you need maintenance, repairs, replacement equipment, or emergency help, call (608)-837-3638 or contact Action online today to schedule service in Madison, WI.
Recent Jobs and Reviews in Madison, WI
Job Locations and Reviews
Performed scheduled furnace clean and check as part of prepaid maintenance package. Identified and replaced clogged humidifier filter on system. Measured carbon monoxide levels, recording 20 ppm on downstairs unit and 10 ppm on upstairs unit, both within acceptable operating range.
Completed prepaid cooling maintenance visit on Goodman outdoor condensing unit. Performed standard seasonal maintenance inspection and testing procedures. Connected diagnostic manifold gauges to measure system pressures and temperatures across the refrigerant circuit. Recorded operating parameters including suction and discharge pressures, subcooling, and superheat values to verify proper refrigerant charge and system performance. Unit operating within normal specifications at time of service. Condensing unit exterior showed typical weathering with accumulated dirt and debris on coil surfaces and cabinet. Documented equipment condition and system readings with photos for service records.
Responded to no heat call on recently installed Lennox furnace system. Upon arrival, accessed unit and inspected internal components, electrical connections, and control board. Verified proper wiring configuration, blower motor operation, and PVC intake/exhaust venting system. Troubleshot and resolved issue preventing furnace from producing heat. Unit tested and confirmed operational with proper heating output restored.
Completed bi-annual preventive maintenance inspection on residential gas furnace and water softener system. Performed comprehensive furnace check including visual inspection of blower motor assembly, electrical connections, gas supply line and shut-off valve, and ductwork connections. Verified proper operation of all internal components with access panel opened for thorough examination. Conducted water softener inspection including evaluation of control head functionality and overall system condition. All equipment found to be operating within normal parameters at time of service.
Responded to service call for furnace that failed home inspection prior to property sale. Secured loose safety switch tape on interior furnace panel and reattached loose tape on front access panel to meet code compliance requirements. Documented all corrections with photographs for inspection records.
Responded to no heat call on Lennox furnace. Upon arrival, found furnace blower motor operating but unit not producing heat. Diagnosed faulty thermostat preventing proper heating cycle initiation. Removed and replaced defective thermostat with new unit, restored proper system operation, and verified furnace now heating correctly.
Performed state-required furnace inspection and identified critical safety hazard with carbon monoxide levels measuring 116 PPM in flue gases, exceeding safe operational limits. Due to dangerous CO levels posing immediate health risk, unit was red-tagged and taken out of service per safety regulations. Additionally noted heavily soiled air filter requiring replacement, with significant dust and debris accumulation throughout mesh structure affecting system airflow and efficiency.
Responded to no-heat call on RV furnace unit. Previous service provider had diagnosed failed igniter with zero ohm reading. Confirmed diagnosis and replaced defective igniter. Verified proper combustion with blue flame established in burner chamber. Tested unit operation and confirmed heating system restored to full functionality.
Completed routine maintenance on dual outdoor condensing units. Performed comprehensive clean and check procedure including inspection of both systems, verification of proper operation, and testing of electrical components. All units found to be functioning within normal parameters with no immediate service concerns identified.
Performed seasonal clean and check maintenance on Goodman air conditioning system per customer's online coupon request. Following COVID safety protocols for immune-compromised occupant, completed exterior preventive maintenance service including inspection of condenser unit, cleaning of coils, and system performance verification. All components found operating within normal parameters with no deficiencies noted.
Completed start-up and commissioning of newly installed furnace and air conditioning system for Unit 5. Reconnected existing lineset, performed pressure test and evacuation procedures, then opened refrigerant valves. Reconnected all ductwork, gas line, venting, and electrical connections. Installed new condensate drain lines and thermostat. Conducted operational testing of all equipment with satisfactory results, confirming proper system function and performance parameters within manufacturer specifications.
Performed startup service on newly installed air conditioning system at Unit 5. Verified all refrigerant connections on lineset, confirmed system had been properly pressure tested and evacuated, and opened refrigerant valves. Inspected electrical connections at breaker panel and disconnect box, confirmed proper circuit identification and amperage ratings. Checked condensate drain lines for proper installation and flow. Energized system and conducted operational testing of compressor, condenser fan, and thermostat functionality. All components operating within normal parameters, system cooling properly with no abnormalities detected.
Performed seasonal start-up procedure on Unit 4 residential air conditioning system. Verified electrical connections at breaker panel, tested condenser unit operation, and confirmed proper refrigerant pressures using manifold gauge set. System operational with no issues detected.
Performed startup and commissioning of newly installed Unit 3 air conditioning system. Verified all electrical connections at breaker panel, confirmed proper circuit labeling and amperage ratings for AC circuits. Conducted temperature differential testing using infrared thermometers, recording supply air temperature of 89.3°F and return air temperature of 98.8°F. System operating within normal parameters following recent installation that included lineset pressure testing, evacuation, refrigerant valve opening, thermostat installation, and drain line routing.
Completed routine maintenance on 12-year-old furnace and air conditioning system, performing cleaning and verification that all components are operating to factory specifications. Inspected corroded turquoise water pipe in basement utility area showing significant deterioration and paint flaking, documented condition with photographs for estimate preparation. System cleanup performed upon completion.
Performed startup service on Unit 3 air conditioning system following recent Lennox furnace and air conditioner installation. Upon initial startup, system was found to be overcharged with refrigerant, requiring recovery of excess refrigerant to achieve proper operating parameters of 8° subcooling and 17° temperature split across the evaporator coil. System is now operating within manufacturer specifications.
Completed AC start-up for Unit 8 following new system installation. Verified all connections from previous install including flushed lineset, pressure testing, evacuation, and refrigerant valve operation. Confirmed proper operation of furnace and AC systems, gas connections, venting, electrical connections, thermostat functionality, and drain lines. All systems tested and operating within normal parameters.
Completed air conditioning start-up service for Unit 5 following recent furnace and AC system replacement. Reconnected and pressure tested lineset, performed evacuation, and opened refrigerant valves. Reconnected all metal ductwork, gas lines, venting, and electrical connections. Installed new drain lines and thermostat. Verified system operation with temperature readings of 170°F and 192°F at supply registers, confirming proper heating functionality. All equipment tested and operating within normal parameters.
Performed startup service on residential air conditioning system following recent installation. Upon initial inspection, refrigerant charge was found to be slightly low. Added refrigerant to achieve proper subcooling of 9°F, confirming optimal system performance and operational readiness.
Responded to gas leak call at residential property. Upon arrival, conducted thorough inspection of basement utility area containing furnace and dual water heater installation. Used combustible gas detector to systematically check all gas piping connections, valves, and fittings throughout the mechanical room. Identified leak at brass ball valve connection on copper gas supply line. Shut off main gas supply and verified system was safe. Tightened compromised fitting and applied pipe thread sealant to connection. Pressure tested gas line system and confirmed no further leaks detected. Restored gas service and verified proper operation of all appliances. System returned to safe working condition.
