Need plumbing, heating, cooling, or electrical help in Madison? Call Action at (608) 291-9165 to arrange service. Describe what has stopped working, where you see the problem, and whether you need an urgent repair or are planning an upgrade.
A century-old home near the Madison isthmus can have very different plumbing, heating, cooling, and electrical needs than a newer property on the far west side. Older homes around Williamson Street, Tenney-Lapham, Marquette, and Vilas may still rely on boilers, aging piping, older panels, or retrofitted cooling systems, while newer homes are more likely to need support for Heat pumps, EV chargers, and higher electrical loads. Action Plumbing, Heating, AC & Electric has served the Madison area since 1989 and maintains a local presence on South Midvale Boulevard.
Our technicians provide heating, air conditioning, plumbing, and electrical services throughout Madison, including ZIP codes 53703, 53704, 53705, 53711, 53713, 53714, 53715, 53716, 53717, 53718, and 53719. Whether you have an unexpected breakdown or are planning an upgrade, call Action at (608) 291-9165 or contact us online to schedule service in Madison, WI.
Find the Right Service for Your Home
A repair, a planned replacement, and routine maintenance call for different conversations. These starting points can help you find the service that fits what is happening at your property.
- No heat or unreliable comfort: Start with heating repair. For seasonal upkeep, explore heating maintenance.
- Warm rooms in summer: Explore AC repair or ductless options for spaces without existing ductwork.
- Leaks, drains, or hot-water trouble: Find leak repair, sewer and drain services, and water heater services.
- Planning an electrical upgrade: Review panel changes, EV charging, and backup generators.
Need help?
608-291-9165Local Home Services for Madison Properties
Madison’s housing stock changes considerably from one side of the city to another. Pre-1940 homes are concentrated around the isthmus and older central neighborhoods, while areas farther from downtown contain large numbers of homes built from the 1950s through the 1970s. Continued expansion toward Madison’s outer edges has also introduced newer construction with different HVAC, plumbing, and electrical demands.
That variety matters when diagnosing problems or planning upgrades. An older property near Atwood Avenue may have gone through several rounds of plumbing or electrical modifications, while a west-side home may be approaching replacement age for its furnace, central air conditioner, or panel. Action’s local Madison presence gives homeowners access to a team familiar with systems found throughout the city and surrounding Dane County communities.
Air Conditioning Services in Madison, WI
Madison summers can bring hot, humid stretches that place heavy demands on cooling equipment. Older homes around the isthmus, Marquette, Tenney-Lapham, and Vilas can be especially challenging because many were built before modern duct systems and whole-home cooling became standard. Action services traditional central air systems, Ductless mini-splits, and heat pumps for homes across the city.
Our Madison cooling services include:
- 24/7 emergency AC repair during Madison heat waves
- Air conditioning installation for older and newer homes
- Air conditioning repair
- Preventive AC maintenance before July and August heat
- Central air conditioning
- Ductless mini-splits for older Madison properties
- Heat pumps for efficient year-round comfort
- Indoor air quality services
- Commercial air conditioning throughout Madison
Heating Services in Madison, WI
Madison heating systems have to perform through long winters, repeated freezes, and cold snaps that can send temperatures well below freezing. Furnaces are common throughout the city, but boilers remain part of the housing landscape in older neighborhoods near Williamson Street, Marquette, Tenney-Lapham, and the isthmus. Heat pumps are also becoming a stronger option for homeowners interested in efficiency and electrification.
Action provides:
- Emergency heating repair during Wisconsin cold snaps
- Heating installation for Madison homes
- Heating maintenance before winter arrives
- Heating repair
- Furnace repair and replacement
- Boiler service for older Madison properties
- Heat pump installation and replacement
- Heat pump repair
- Heat pump maintenance
- Indoor air quality services for dry winter conditions
Plumbing Services in Madison, WI
Madison’s plumbing needs are shaped by housing age, groundwater conditions, and naturally hard municipal water. Homes near downtown, UW-Madison, and the near east side may contain piping that has been repaired, replaced, or modified several times, while mid-century homes throughout the city are also reaching an age where original pipes, drains, fixtures, and water heaters may need attention. Mineral-heavy water can also contribute to scale inside water heaters, fixtures, and water-using appliances.
Our plumbing services include:
- Emergency plumbing throughout Madison
- Plumbing repair for older and newer homes
- Leak detection for aging Madison plumbing systems
- Kitchen plumbing
- Bathroom plumbing
- Faucets and fixtures
- Commercial plumbing
- Gas lines
- Sewer and drain services
- Water heater repair and replacement
- Water softeners for Madison’s hard water
- Water filtration
- Piping and repiping for older homes
- Pipe replacement and repair
- Well systems in surrounding Dane County areas
Properties near Lake Mendota, Lake Monona, and the Yahara River corridor can also face drainage concerns during spring thaw and periods of heavy rainfall. Saturated soil and higher groundwater levels can place more pressure on basement drainage and sump systems, while aging plumbing can be more vulnerable to leaks or failures. Professional leak detection, drain service, pipe repair, and water treatment can help address those issues before they become larger problems.
Need help?
608-291-9165Electrical Services in Madison, WI
Madison homes are being asked to support more electrical demand than ever before. Older properties were never designed for today’s combination of central air conditioning, EV chargers, heat pumps, home offices, large appliances, and connected electronics. In established neighborhoods, that can make electrical capacity just as important as the condition of the equipment being installed.
Action’s electrical services include:
- Generators for Madison power outages
- EV charger installation for home charging
- Whole-home surge protection for storm season
- Electrical service upgrades for older homes
- Meter base and panel changes
- Interior and exterior lighting
- Dedicated circuits and outlets for modern equipment
- Equipment hookup and repair
- Commercial electrical services throughout Madison
For help planning an electrical upgrade, HVAC replacement, or another project that involves multiple systems, call (608) 291-9165 or contact Action online.
Why Madison Homeowners Choose Action
Action has served Madison and the surrounding area since 1989. That experience spans decades of neighborhood growth, changing building systems, and new home technology. The company also maintains a local Madison presence on South Midvale Boulevard.
Homeowners can turn to Action for:
- 24/7 emergency service
- Plumbing, HVAC, and electrical expertise
- Licensed and insured technicians
- Upfront pricing
- Water heater installation; ask about availability and offer conditions
- A 100% customer satisfaction guarantee
- Local service backed by decades of experience
Our goal is to identify the problem clearly, explain the available options, and provide a solution that makes sense for the home. That approach is especially important in Madison, where a house near Capitol Square can have very different systems and service needs than a newer property several miles west or east.
Schedule Plumbing, HVAC or Electrical Service in Madison, WI
A Madison home near Lake Monona may need help with drainage or aging plumbing, while an older property near the isthmus may be dealing with boiler heat, dated electrical infrastructure, or cooling challenges. Homes farther west and east may be approaching furnace or AC replacement or preparing for newer upgrades such as heat pumps and EV chargers.
Action Plumbing, Heating, AC & Electric has served the Madison area since 1989 and provides plumbing, heating, air conditioning, and electrical services throughout the city. Whether you need maintenance, repairs, replacement equipment, or emergency help, call (608) 291-9165 or contact Action online today to schedule service in Madison, WI.
Repair or Replacement: Make a Plan for Your Madison Home
A recurring breakdown, uneven comfort, a leak, or a tripping circuit deserves a diagnosis before you commit to new equipment. Explain when the problem started, what has changed, and any previous repairs. The age of the equipment is useful context, but its condition and the cause of the problem matter too.
For a replacement or larger upgrade, ask how the proposed work fits the rest of your home. Heating and cooling equipment can depend on airflow and electrical capacity; water heaters depend on the available space, connections, and demand. Compare the recommended scope, expected maintenance, and available alternatives so you can make an informed decision.
Questions About Home Services in Madison, WI
Can a Madison home with boiler heat add air conditioning?
Yes, a home without existing cooling ducts may be a candidate for ductless cooling. The right choice depends on room layout, insulation, available electrical capacity, and the equipment already in place. An assessment can compare options without assuming the boiler must be removed.
Does Action offer emergency service?
Action advertises 24/7 emergency service. Call (608) 291-9165, explain the issue, and confirm the availability and next steps for your address. Emergency service availability does not guarantee a specific arrival time.
What information should I have ready when I call?
Have your service address, the symptoms, and any accessible equipment details ready. Mention recent repairs and whether the problem affects one fixture or room, or the whole home. You do not need to diagnose the issue yourself.
Arrange Service in Madison, WI
Call (608) 291-9165 to discuss a repair, maintenance visit, or home improvement project with Action Plumbing, Heating, AC & Electric. Explain your priorities so the team can help you plan the next step.
Need help?
608-291-9165Recent Jobs and Reviews in Madison, WI
Madison, WI at a glance
Action Plumbing, Heating, AC & Electric has completed 20 jobs in Madison, WI in September 2026.
The most recent job was on September 25, 2026.
Action Plumbing, Heating, AC & Electric has completed 609 jobs in Madison, WI in the last 12 months.
Job Locations and Reviews
Completed routine maintenance and inspection on 2009 Lennox gas furnace system. Performed thorough cleaning of heat exchanger, burner assembly, and blower components. Inspected all mechanical and safety systems, verified proper operation, and documented equipment condition with photographic records.
Completed comprehensive furnace tune-up including inspection and cleaning of all major components. Verified igniter resistance at 50 ohms, confirmed blower motor operation, and measured combustion at 11 ppm CO. Inspected and tightened electrical connections, checked pressure switch ports, and blew out header box. Cleaned flame sensor and drain trap, replaced air filter and humidifier panel, and reset humidifier control board. Added vinegar to condensate pump for maintenance and applied lubricant to combustion blower motor to eliminate operational noise. Unit operating normally upon completion with all safety checks passed.
Responded to service call for venting system repairs at industrial warehouse facility. Inspected and assessed deteriorated vent piping on rooftop and at unit heater locations throughout the building. Identified multiple points of venting leaks caused by rotted and corroded pipe sections requiring replacement. Utilized aerial lift equipment to access elevated unit heaters and rooftop penetrations for thorough evaluation. Documented existing conditions with photographs showing extent of deterioration in venting infrastructure. Provided on-site assessment and recommendations for necessary repairs to restore proper venting function and prevent further system degradation.
Responded to no heat call on aging Rheem furnace system. Upon arrival, confirmed unit was not operating. Diagnosed faulty pressure switch preventing ignition sequence. Pressure switch was stuck in open position, causing safety lockout. Manually freed stuck pressure switch and restored unit to operational status. Performed combustion analysis using digital analyzer, confirming proper oxygen levels at 13.1% and carbon dioxide at 4.5%, with acceptable temperature readings. Unit currently heating; however, pressure switch shows signs of failure and requires replacement to prevent future service interruptions. Also noted tenant complaint of air conditioning malfunction from previous week requiring separate evaluation.
Completed comprehensive preventive maintenance on both heating and cooling systems. Performed furnace inspection including cleaning flame sensor, verifying igniter resistance at 48 ohms, inspecting burners and pressure switch ports, blowing out pressure switch ports, and clearing drain trap. Conducted air conditioning service including washing condenser coil, testing capacitor and contactor with satisfactory results, and verifying proper refrigerant pressures and cooling performance. Changed air filter and secured loose thermostat connections. Both systems tested and confirmed operating within normal parameters.
Completed furnace cleaning and tune-up inspection, verifying proper combustion with readings of 27 ppm and stack temperature of 133°F. Replaced air filter and inspected humidifier system, addressing customer's concerns regarding humidifier operation and ensuring all components are functioning within manufacturer specifications.
Completed annual maintenance on both air conditioning and heating systems. Performed comprehensive clean and check on Goodman furnace and AirEase condenser unit, with both systems operating within normal parameters. Verified condenser capacitor and contactor functionality, confirmed refrigerant levels appropriate for ambient temperature conditions. Measured furnace igniter at 48 ohms, inspected blower fan spin screen, and confirmed recent filter replacement. Exterior condenser coil washed to remove debris and improve heat transfer efficiency. Cleaned flame sensor and tightened all electrical connections to ensure reliable operation. Removed and cleaned condensate drain trap, inspected pressure switch ports for obstructions, and cleared header box end to maintain proper drainage and system safety.
Responded to no heat call and found 2023 Lennox 80% efficiency furnace operating normally upon arrival. Performed basic cleaning and system check of all components, including blower motor, electrical connections, and control boards. Unit tested and confirmed functioning properly with no issues identified at time of service.
Completed comprehensive furnace clean and check maintenance service for rewards member. Performed system diagnostics using calibrated digital measuring instruments to verify proper airflow and static pressure readings throughout the HVAC system. All equipment operating within normal parameters with no issues identified.
Performed heating maintenance on an older 80% efficiency gas furnace. Conducted comprehensive cleaning and operational check of all components. Utilized combustion analyzer to verify system performance, measuring oxygen levels at 7.8%, carbon dioxide at 7.5%, and flue temperature at 306°F. All readings confirmed proper combustion efficiency and safe operation. Exterior condenser unit inspected; noted vegetation overgrowth around unit requiring clearance for optimal airflow. System operating within normal parameters upon completion of maintenance service.
Responded to no-heat service call for residential furnace system. Upon arrival, confirmed furnace would not initiate heating cycle. Performed diagnostic troubleshooting of heating system components including electrical connections, control board, and thermostat operation. Testing revealed faulty thermostat preventing proper communication with furnace control system. Removed defective thermostat from wall and installed new replacement unit. Verified proper wiring connections and system compatibility. Cycled system through multiple heating calls to confirm proper operation. Furnace now responding correctly to thermostat commands and producing heat as designed. System restored to full operational status.
Responded to service call for unusual noise occurring during blower fan startup and shutdown on recently installed Magic Pack system (HWC860-7-11-30P-02A unit installed July 2024). Upon inspection, identified tape material causing interference with blower operation. Removed obstructing tape from blower assembly, resolving startup noise issue. Unit tested and operating normally.
Completed comprehensive furnace clean and check maintenance service on residential forced-air heating system. Removed access panels to inspect internal components including blower motor assembly, gas valve, control boards, electrical connections, and wiring harness. All colored wiring connections were verified secure with no signs of deterioration or loose terminals. Blower motor and housing inspected and found in good operational condition. Gas line connections checked for proper installation and safety compliance. Unit exterior and interior components showed no visible signs of excessive wear, damage, or safety concerns at time of service.
Completed comprehensive furnace clean and check maintenance service on residential heating system. Performed standard tune-up procedures including inspection of blower motor assembly, electrical connections, and all mechanical components to ensure proper operation for the heating season.
Completed routine maintenance on 2018 Carrier furnace system as part of prepaid heating service agreement. Performed comprehensive cleaning and operational inspection of unit, verified combustion analysis readings showing proper air-fuel mixture and system efficiency, and confirmed all mechanical components functioning within manufacturer specifications.
Completed comprehensive furnace tune-up on residential gas-fired forced air unit. Performed system diagnostics revealing igniter resistance at 50 ohms and combustion analysis showing 6 ppm carbon monoxide output. Cleaned flame sensor, replaced air filter, cleared drain trap debris, and tightened all electrical connections. Verified blower motor operation and confirmed unit heating properly with safe operational parameters.
Completed prepaid maintenance visit on 2021 Goodman furnace unit. Performed comprehensive cleaning and inspection of all accessible components, verified proper operation of all systems, and confirmed unit is in good working condition with no issues identified.
Performed comprehensive furnace cleaning and inspection on a 2003 Lennox unit located in basement utility area. Completed standard maintenance procedures including filter inspection, burner cleaning, and safety system verification on equipment over 20 years old. Unit operational upon completion of service.
Completed furnace clean and check maintenance service for rewards member. Performed thorough inspection of gas furnace system including blower motor, burner assembly, heat exchanger, ignition components, and electrical connections. Inspected and evaluated Aprilaire humidifier mounted on ductwork system to ensure proper integration with HVAC operation.
Performed comprehensive clean and check service on 2003 Lennox furnace and air conditioning system. Inspected internal blower assembly, electrical connections, and control mechanisms on furnace unit with access panel removed for thorough examination. Evaluated outdoor condenser unit, fan operation, and electrical disconnect components, confirming proper system function on both heating and cooling equipment.
