Need plumbing, heating, cooling, or electrical help in Madison? Call Action at (608) 291-9165 to arrange service. Describe what has stopped working, where you see the problem, and whether you need an urgent repair or are planning an upgrade.
A century-old home near the Madison isthmus can have very different plumbing, heating, cooling, and electrical needs than a newer property on the far west side. Older homes around Williamson Street, Tenney-Lapham, Marquette, and Vilas may still rely on boilers, aging piping, older panels, or retrofitted cooling systems, while newer homes are more likely to need support for Heat pumps, EV chargers, and higher electrical loads. Action Plumbing, Heating, AC & Electric has served the Madison area since 1989 and maintains a local presence on South Midvale Boulevard.
Our technicians provide heating, air conditioning, plumbing, and electrical services throughout Madison, including ZIP codes 53703, 53704, 53705, 53711, 53713, 53714, 53715, 53716, 53717, 53718, and 53719. Whether you have an unexpected breakdown or are planning an upgrade, call Action at (608) 291-9165 or contact us online to schedule service in Madison, WI.
Find the Right Service for Your Home
A repair, a planned replacement, and routine maintenance call for different conversations. These starting points can help you find the service that fits what is happening at your property.
- No heat or unreliable comfort: Start with heating repair. For seasonal upkeep, explore heating maintenance.
- Warm rooms in summer: Explore AC repair or ductless options for spaces without existing ductwork.
- Leaks, drains, or hot-water trouble: Find leak repair, sewer and drain services, and water heater services.
- Planning an electrical upgrade: Review panel changes, EV charging, and backup generators.
Need help?
608-291-9165Local Home Services for Madison Properties
Madison’s housing stock changes considerably from one side of the city to another. Pre-1940 homes are concentrated around the isthmus and older central neighborhoods, while areas farther from downtown contain large numbers of homes built from the 1950s through the 1970s. Continued expansion toward Madison’s outer edges has also introduced newer construction with different HVAC, plumbing, and electrical demands.
That variety matters when diagnosing problems or planning upgrades. An older property near Atwood Avenue may have gone through several rounds of plumbing or electrical modifications, while a west-side home may be approaching replacement age for its furnace, central air conditioner, or panel. Action’s local Madison presence gives homeowners access to a team familiar with systems found throughout the city and surrounding Dane County communities.
Air Conditioning Services in Madison, WI
Madison summers can bring hot, humid stretches that place heavy demands on cooling equipment. Older homes around the isthmus, Marquette, Tenney-Lapham, and Vilas can be especially challenging because many were built before modern duct systems and whole-home cooling became standard. Action services traditional central air systems, Ductless mini-splits, and heat pumps for homes across the city.
Our Madison cooling services include:
- 24/7 emergency AC repair during Madison heat waves
- Air conditioning installation for older and newer homes
- Air conditioning repair
- Preventive AC maintenance before July and August heat
- Central air conditioning
- Ductless mini-splits for older Madison properties
- Heat pumps for efficient year-round comfort
- Indoor air quality services
- Commercial air conditioning throughout Madison
Heating Services in Madison, WI
Madison heating systems have to perform through long winters, repeated freezes, and cold snaps that can send temperatures well below freezing. Furnaces are common throughout the city, but boilers remain part of the housing landscape in older neighborhoods near Williamson Street, Marquette, Tenney-Lapham, and the isthmus. Heat pumps are also becoming a stronger option for homeowners interested in efficiency and electrification.
Action provides:
- Emergency heating repair during Wisconsin cold snaps
- Heating installation for Madison homes
- Heating maintenance before winter arrives
- Heating repair
- Furnace repair and replacement
- Boiler service for older Madison properties
- Heat pump installation and replacement
- Heat pump repair
- Heat pump maintenance
- Indoor air quality services for dry winter conditions
Plumbing Services in Madison, WI
Madison’s plumbing needs are shaped by housing age, groundwater conditions, and naturally hard municipal water. Homes near downtown, UW-Madison, and the near east side may contain piping that has been repaired, replaced, or modified several times, while mid-century homes throughout the city are also reaching an age where original pipes, drains, fixtures, and water heaters may need attention. Mineral-heavy water can also contribute to scale inside water heaters, fixtures, and water-using appliances.
Our plumbing services include:
- Emergency plumbing throughout Madison
- Plumbing repair for older and newer homes
- Leak detection for aging Madison plumbing systems
- Kitchen plumbing
- Bathroom plumbing
- Faucets and fixtures
- Commercial plumbing
- Gas lines
- Sewer and drain services
- Water heater repair and replacement
- Water softeners for Madison’s hard water
- Water filtration
- Piping and repiping for older homes
- Pipe replacement and repair
- Well systems in surrounding Dane County areas
Properties near Lake Mendota, Lake Monona, and the Yahara River corridor can also face drainage concerns during spring thaw and periods of heavy rainfall. Saturated soil and higher groundwater levels can place more pressure on basement drainage and sump systems, while aging plumbing can be more vulnerable to leaks or failures. Professional leak detection, drain service, pipe repair, and water treatment can help address those issues before they become larger problems.
Need help?
608-291-9165Electrical Services in Madison, WI
Madison homes are being asked to support more electrical demand than ever before. Older properties were never designed for today’s combination of central air conditioning, EV chargers, heat pumps, home offices, large appliances, and connected electronics. In established neighborhoods, that can make electrical capacity just as important as the condition of the equipment being installed.
Action’s electrical services include:
- Generators for Madison power outages
- EV charger installation for home charging
- Whole-home surge protection for storm season
- Electrical service upgrades for older homes
- Meter base and panel changes
- Interior and exterior lighting
- Dedicated circuits and outlets for modern equipment
- Equipment hookup and repair
- Commercial electrical services throughout Madison
For help planning an electrical upgrade, HVAC replacement, or another project that involves multiple systems, call (608) 291-9165 or contact Action online.
Why Madison Homeowners Choose Action
Action has served Madison and the surrounding area since 1989. That experience spans decades of neighborhood growth, changing building systems, and new home technology. The company also maintains a local Madison presence on South Midvale Boulevard.
Homeowners can turn to Action for:
- 24/7 emergency service
- Plumbing, HVAC, and electrical expertise
- Licensed and insured technicians
- Upfront pricing
- Water heater installation; ask about availability and offer conditions
- A 100% customer satisfaction guarantee
- Local service backed by decades of experience
Our goal is to identify the problem clearly, explain the available options, and provide a solution that makes sense for the home. That approach is especially important in Madison, where a house near Capitol Square can have very different systems and service needs than a newer property several miles west or east.
Schedule Plumbing, HVAC or Electrical Service in Madison, WI
A Madison home near Lake Monona may need help with drainage or aging plumbing, while an older property near the isthmus may be dealing with boiler heat, dated electrical infrastructure, or cooling challenges. Homes farther west and east may be approaching furnace or AC replacement or preparing for newer upgrades such as heat pumps and EV chargers.
Action Plumbing, Heating, AC & Electric has served the Madison area since 1989 and provides plumbing, heating, air conditioning, and electrical services throughout the city. Whether you need maintenance, repairs, replacement equipment, or emergency help, call (608) 291-9165 or contact Action online today to schedule service in Madison, WI.
Repair or Replacement: Make a Plan for Your Madison Home
A recurring breakdown, uneven comfort, a leak, or a tripping circuit deserves a diagnosis before you commit to new equipment. Explain when the problem started, what has changed, and any previous repairs. The age of the equipment is useful context, but its condition and the cause of the problem matter too.
For a replacement or larger upgrade, ask how the proposed work fits the rest of your home. Heating and cooling equipment can depend on airflow and electrical capacity; water heaters depend on the available space, connections, and demand. Compare the recommended scope, expected maintenance, and available alternatives so you can make an informed decision.
Questions About Home Services in Madison, WI
Can a Madison home with boiler heat add air conditioning?
Yes, a home without existing cooling ducts may be a candidate for ductless cooling. The right choice depends on room layout, insulation, available electrical capacity, and the equipment already in place. An assessment can compare options without assuming the boiler must be removed.
Does Action offer emergency service?
Action advertises 24/7 emergency service. Call (608) 291-9165, explain the issue, and confirm the availability and next steps for your address. Emergency service availability does not guarantee a specific arrival time.
What information should I have ready when I call?
Have your service address, the symptoms, and any accessible equipment details ready. Mention recent repairs and whether the problem affects one fixture or room, or the whole home. You do not need to diagnose the issue yourself.
Arrange Service in Madison, WI
Call (608) 291-9165 to discuss a repair, maintenance visit, or home improvement project with Action Plumbing, Heating, AC & Electric. Explain your priorities so the team can help you plan the next step.
Need help?
608-291-9165Recent Jobs and Reviews in Madison, WI
Madison, WI at a glance
Action Plumbing, Heating, AC & Electric has completed 20 jobs in Madison, WI between September 2026 and October 2026.
The most recent job was on October 1, 2026.
Action Plumbing, Heating, AC & Electric has completed 609 jobs in Madison, WI in the last 12 months.
Job Locations and Reviews
Completed prepaid furnace tune-up and maintenance on Arcoaire forced-air heating system. Performed comprehensive cleaning and operational check of furnace unit, verified proper function of all components, inspected gas connections and shut-off valve, and documented temperature differential readings showing supply air at 88.6°F and return air at -14.8°F. All systems operating within normal parameters with no deficiencies noted.
Completed comprehensive furnace tune-up on American Standard unit. Replaced air filter and cleaned flame sensor which had accumulated buildup affecting operation. Inspected all condensate drain lines and confirmed clear of obstructions. Verified igniter resistance at 16 ohms within acceptable range, measured combustion analysis showing CO levels at 8 ppm, and confirmed proper heat rise with delta T of 60 degrees, indicating optimal system performance.
Performed comprehensive furnace cleaning and inspection on Ruud heating system. Accessed internal components, inspected blower motor assembly, gas valve, wiring harnesses, and all mechanical systems. System is operating properly with all components functioning within normal parameters.
Completed scheduled furnace clean and check for rewards member. Performed comprehensive system inspection and cleaning of heating unit. Verified supply air temperature at 75.3°F and return air temperature at 25.5°F, confirming proper temperature rise across heat exchanger. Utilized calibrated digital thermometers and differential pressure gauge (reading 52) to assess system performance. Inspected internal components including blower motor, heat exchanger, gas connections, copper refrigerant lines, and electrical wiring. All safety labels and warnings verified intact on equipment panel. System operating within normal parameters with no deficiencies noted.
Completed annual heating maintenance including furnace clean and check. Found dirty filter during inspection and replaced with customer-supplied filter. Performed humidifier service and inspection as requested to ensure proper operation for the heating season.
Completed comprehensive tune-up on Weil-McLain Magic Pak combination heating and cooling unit. Cleaned dirty flame sensors to ensure proper ignition and safe operation, replaced air filter, and performed full system inspection. Verified both furnace and air conditioning components were operating within manufacturer specifications upon completion.
Completed clean and check maintenance on two Lennox furnace systems. Found dirty air filters on both units, replaced filters to restore proper airflow. Performed standard tune-up procedures including inspection of blower motors, gas valve assemblies, electrical connections, and safety controls using diagnostic equipment. All systems operating within normal parameters upon completion.
Completed furnace clean and check maintenance visit for rewards member. Found dirty filter during inspection and replaced with customer-supplied filter. Performed thorough cleaning and inspection of furnace unit with front access panel removed to verify proper operation of internal components, wiring, and mechanical systems.
Completed annual heating maintenance on 24-year-old Heil furnace unit. Performed thorough cleaning of all accessible components, inspected burner assembly, heat exchanger, blower motor, and electrical connections. Unit operating properly with no deficiencies noted; all systems functioning within normal parameters.
Responded to no cooling and no heat call on 2008 Carrier system. Found unit locked out on rollout switch due to partially plugged heat exchanger restricting proper airflow and combustion. Documented equipment condition with photos showing furnace installation and surrounding components in mechanical room.
Responded to no heat call on residential boiler system. Upon arrival, discovered boiler had no power supply despite recent electrical panel upgrade. Investigation revealed that electrician had failed to connect boiler circuit to new breaker panel during installation. Established proper electrical connection from breaker panel to boiler unit, restoring power to system. Following electrical connection, boiler fired successfully and unit achieved normal operation. However, during system check, identified that system water pressure was reading zero PSI on pressure gauge. Determined that automatic fill valve was not functioning and failing to maintain proper system pressure. Without adequate water pressure, boiler would be unable to operate safely or efficiently long-term. Documented model and serial number information from existing auto fill valve for parts ordering purposes. Explained to customer that replacement of defective auto fill valve would be necessary to maintain proper system
Completed furnace clean and check service. Performed combustion analysis measuring flue gas temperature at 74°F with 0 ppm carbon monoxide, confirming safe and efficient operation. Verified static pressure at 0.354 inches of water column, indicating proper airflow through the system.
Responded to no heat call on rooftop HVAC unit. Upon inspection, discovered failed igniter with rust corrosion on bottom section that broke during attempted cleaning. Ordered replacement igniter from Johnstone Supply for installation on return visit. Identified severely dirty air filters requiring immediate replacement; will supply four 14x14x2 filters upon callback. Customer requested enrollment in preventative maintenance program.
Completed routine maintenance on International Comfort Products natural gas furnace, model N95ESM0401712A1 (40,000 BTU input). Performed comprehensive cleaning and inspection of all components, verified combustion efficiency using Testo 310 analyzer with readings of 7.4% O2 and 15.7% CO2, and confirmed unit is operating within manufacturer specifications.
Completed furnace clean and check on Armstrong Air unit. System operating and heating effectively with igniter reading 53 ohms, blower fan spinning freely, and first stage CO output at 10 ppm. Removed and cleaned flame sensor, cleaned drain trap bottom, blew out coil and header box openings, and tightened electrical connections on control board. Noted pressure switch ports showing cracks and wear but unit functioning properly at this time. Adjusted gas pressure from 1.5 to 1.65 to improve performance, resulting in first stage delta T increase from 18° to 24°.
Completed scheduled furnace clean and check maintenance visit for Rewards Member. Performed comprehensive inspection and cleaning of residential HVAC system, including furnace unit, ductwork, and associated components. Verified system operation, checked refrigerant lines, inspected condensate pump, and documented equipment condition with photos. All systems operating within normal parameters.
Responded to no-heat call on recently installed furnace system. Upon arrival, confirmed unit had power and blower motor operation but was not producing heat. Conducted system evaluation and determined issue was related to improper thermostat configuration and control settings on the new equipment. Programmed computerized controls to proper heating parameters, verified thermostat communication with furnace, and cycled system through complete heating operation. Confirmed ignition sequence, burner operation, and heat delivery to all zones. Instructed occupant on proper operation of new digital controls and thermostat functions. System restored to full heating capacity and left in operational condition.
# Annual Furnace Maintenance Summary Completed comprehensive annual maintenance and tune-up on an 11-year-old residential furnace system. Performed standard heating season preparation including thorough cleaning and inspection of all major components. # Work Performed Conducted complete furnace clean and check procedure. Inspected heat exchanger for cracks, corrosion, and structural integrity. Verified proper combustion chamber condition and burner assembly operation. Cleaned burners and adjusted flame pattern for optimal efficiency. Checked and cleaned blower assembly, including motor and fan blades. Inspected all electrical connections and tightened terminals as needed. Verified proper operation of safety controls including limit switches and flame sensors. Tested ignition system for reliable startup. Checked gas pressure and adjusted as necessary to manufacturer specifications. Replaced air filter and inspected ductwork connections visible at furnace cabinet. Noted typical age
Completed comprehensive furnace maintenance including igniter resistance testing (47.8 ohms), flame sensor cleaning, and verification of proper blower motor operation. Removed and cleaned condensate drain trap to address minor buildup, blew out collector box and header box, cleaned pressure switch ports, and tightened electrical connections at control board. Unit operational testing confirmed appropriate heating operation with low-stage carbon monoxide output at 9 ppm, and replaced thermostat batteries to ensure system reliability.
Responded to no-cooling complaint on Lennox air conditioning system installed three months prior under warranty. Upon inspection, discovered the pull-out disconnect was not properly seated in the outdoor disconnect box, resulting in complete loss of power to the condensing unit. Reseated the disconnect securely, verified proper electrical connection, and restored power to the system. Confirmed unit operation with normal startup, proper fan rotation, and adequate airflow through the condenser coil. System returned to full cooling capacity with no additional issues identified.
