Need plumbing, heating, cooling, or electrical help in Madison? Call Action at (608) 291-9165 to arrange service. Describe what has stopped working, where you see the problem, and whether you need an urgent repair or are planning an upgrade.
A century-old home near the Madison isthmus can have very different plumbing, heating, cooling, and electrical needs than a newer property on the far west side. Older homes around Williamson Street, Tenney-Lapham, Marquette, and Vilas may still rely on boilers, aging piping, older panels, or retrofitted cooling systems, while newer homes are more likely to need support for Heat pumps, EV chargers, and higher electrical loads. Action Plumbing, Heating, AC & Electric has served the Madison area since 1989 and maintains a local presence on South Midvale Boulevard.
Our technicians provide heating, air conditioning, plumbing, and electrical services throughout Madison, including ZIP codes 53703, 53704, 53705, 53711, 53713, 53714, 53715, 53716, 53717, 53718, and 53719. Whether you have an unexpected breakdown or are planning an upgrade, call Action at (608) 291-9165 or contact us online to schedule service in Madison, WI.
Find the Right Service for Your Home
A repair, a planned replacement, and routine maintenance call for different conversations. These starting points can help you find the service that fits what is happening at your property.
- No heat or unreliable comfort: Start with heating repair. For seasonal upkeep, explore heating maintenance.
- Warm rooms in summer: Explore AC repair or ductless options for spaces without existing ductwork.
- Leaks, drains, or hot-water trouble: Find leak repair, sewer and drain services, and water heater services.
- Planning an electrical upgrade: Review panel changes, EV charging, and backup generators.
Need help?
608-291-9165Local Home Services for Madison Properties
Madison’s housing stock changes considerably from one side of the city to another. Pre-1940 homes are concentrated around the isthmus and older central neighborhoods, while areas farther from downtown contain large numbers of homes built from the 1950s through the 1970s. Continued expansion toward Madison’s outer edges has also introduced newer construction with different HVAC, plumbing, and electrical demands.
That variety matters when diagnosing problems or planning upgrades. An older property near Atwood Avenue may have gone through several rounds of plumbing or electrical modifications, while a west-side home may be approaching replacement age for its furnace, central air conditioner, or panel. Action’s local Madison presence gives homeowners access to a team familiar with systems found throughout the city and surrounding Dane County communities.
Air Conditioning Services in Madison, WI
Madison summers can bring hot, humid stretches that place heavy demands on cooling equipment. Older homes around the isthmus, Marquette, Tenney-Lapham, and Vilas can be especially challenging because many were built before modern duct systems and whole-home cooling became standard. Action services traditional central air systems, Ductless mini-splits, and heat pumps for homes across the city.
Our Madison cooling services include:
- 24/7 emergency AC repair during Madison heat waves
- Air conditioning installation for older and newer homes
- Air conditioning repair
- Preventive AC maintenance before July and August heat
- Central air conditioning
- Ductless mini-splits for older Madison properties
- Heat pumps for efficient year-round comfort
- Indoor air quality services
- Commercial air conditioning throughout Madison
Heating Services in Madison, WI
Madison heating systems have to perform through long winters, repeated freezes, and cold snaps that can send temperatures well below freezing. Furnaces are common throughout the city, but boilers remain part of the housing landscape in older neighborhoods near Williamson Street, Marquette, Tenney-Lapham, and the isthmus. Heat pumps are also becoming a stronger option for homeowners interested in efficiency and electrification.
Action provides:
- Emergency heating repair during Wisconsin cold snaps
- Heating installation for Madison homes
- Heating maintenance before winter arrives
- Heating repair
- Furnace repair and replacement
- Boiler service for older Madison properties
- Heat pump installation and replacement
- Heat pump repair
- Heat pump maintenance
- Indoor air quality services for dry winter conditions
Plumbing Services in Madison, WI
Madison’s plumbing needs are shaped by housing age, groundwater conditions, and naturally hard municipal water. Homes near downtown, UW-Madison, and the near east side may contain piping that has been repaired, replaced, or modified several times, while mid-century homes throughout the city are also reaching an age where original pipes, drains, fixtures, and water heaters may need attention. Mineral-heavy water can also contribute to scale inside water heaters, fixtures, and water-using appliances.
Our plumbing services include:
- Emergency plumbing throughout Madison
- Plumbing repair for older and newer homes
- Leak detection for aging Madison plumbing systems
- Kitchen plumbing
- Bathroom plumbing
- Faucets and fixtures
- Commercial plumbing
- Gas lines
- Sewer and drain services
- Water heater repair and replacement
- Water softeners for Madison’s hard water
- Water filtration
- Piping and repiping for older homes
- Pipe replacement and repair
- Well systems in surrounding Dane County areas
Properties near Lake Mendota, Lake Monona, and the Yahara River corridor can also face drainage concerns during spring thaw and periods of heavy rainfall. Saturated soil and higher groundwater levels can place more pressure on basement drainage and sump systems, while aging plumbing can be more vulnerable to leaks or failures. Professional leak detection, drain service, pipe repair, and water treatment can help address those issues before they become larger problems.
Need help?
608-291-9165Electrical Services in Madison, WI
Madison homes are being asked to support more electrical demand than ever before. Older properties were never designed for today’s combination of central air conditioning, EV chargers, heat pumps, home offices, large appliances, and connected electronics. In established neighborhoods, that can make electrical capacity just as important as the condition of the equipment being installed.
Action’s electrical services include:
- Generators for Madison power outages
- EV charger installation for home charging
- Whole-home surge protection for storm season
- Electrical service upgrades for older homes
- Meter base and panel changes
- Interior and exterior lighting
- Dedicated circuits and outlets for modern equipment
- Equipment hookup and repair
- Commercial electrical services throughout Madison
For help planning an electrical upgrade, HVAC replacement, or another project that involves multiple systems, call (608) 291-9165 or contact Action online.
Why Madison Homeowners Choose Action
Action has served Madison and the surrounding area since 1989. That experience spans decades of neighborhood growth, changing building systems, and new home technology. The company also maintains a local Madison presence on South Midvale Boulevard.
Homeowners can turn to Action for:
- 24/7 emergency service
- Plumbing, HVAC, and electrical expertise
- Licensed and insured technicians
- Upfront pricing
- Water heater installation; ask about availability and offer conditions
- A 100% customer satisfaction guarantee
- Local service backed by decades of experience
Our goal is to identify the problem clearly, explain the available options, and provide a solution that makes sense for the home. That approach is especially important in Madison, where a house near Capitol Square can have very different systems and service needs than a newer property several miles west or east.
Schedule Plumbing, HVAC or Electrical Service in Madison, WI
A Madison home near Lake Monona may need help with drainage or aging plumbing, while an older property near the isthmus may be dealing with boiler heat, dated electrical infrastructure, or cooling challenges. Homes farther west and east may be approaching furnace or AC replacement or preparing for newer upgrades such as heat pumps and EV chargers.
Action Plumbing, Heating, AC & Electric has served the Madison area since 1989 and provides plumbing, heating, air conditioning, and electrical services throughout the city. Whether you need maintenance, repairs, replacement equipment, or emergency help, call (608) 291-9165 or contact Action online today to schedule service in Madison, WI.
Repair or Replacement: Make a Plan for Your Madison Home
A recurring breakdown, uneven comfort, a leak, or a tripping circuit deserves a diagnosis before you commit to new equipment. Explain when the problem started, what has changed, and any previous repairs. The age of the equipment is useful context, but its condition and the cause of the problem matter too.
For a replacement or larger upgrade, ask how the proposed work fits the rest of your home. Heating and cooling equipment can depend on airflow and electrical capacity; water heaters depend on the available space, connections, and demand. Compare the recommended scope, expected maintenance, and available alternatives so you can make an informed decision.
Questions About Home Services in Madison, WI
Can a Madison home with boiler heat add air conditioning?
Yes, a home without existing cooling ducts may be a candidate for ductless cooling. The right choice depends on room layout, insulation, available electrical capacity, and the equipment already in place. An assessment can compare options without assuming the boiler must be removed.
Does Action offer emergency service?
Action advertises 24/7 emergency service. Call (608) 291-9165, explain the issue, and confirm the availability and next steps for your address. Emergency service availability does not guarantee a specific arrival time.
What information should I have ready when I call?
Have your service address, the symptoms, and any accessible equipment details ready. Mention recent repairs and whether the problem affects one fixture or room, or the whole home. You do not need to diagnose the issue yourself.
Arrange Service in Madison, WI
Call (608) 291-9165 to discuss a repair, maintenance visit, or home improvement project with Action Plumbing, Heating, AC & Electric. Explain your priorities so the team can help you plan the next step.
Need help?
608-291-9165Recent Jobs and Reviews in Madison, WI
Madison, WI at a glance
Action Plumbing, Heating, AC & Electric has completed 20 jobs in Madison, WI between March 2026 and April 2026.
The most recent job was on April 3, 2026.
Action Plumbing, Heating, AC & Electric has completed 616 jobs in Madison, WI in the last 12 months.
Job Locations and Reviews
Performed seasonal clean and check maintenance on Goodman air conditioning system per customer's online coupon request. Following COVID safety protocols for immune-compromised occupant, completed exterior preventive maintenance service including inspection of condenser unit, cleaning of coils, and system performance verification. All components found operating within normal parameters with no deficiencies noted.
Completed start-up and commissioning of newly installed furnace and air conditioning system for Unit 5. Reconnected existing lineset, performed pressure test and evacuation procedures, then opened refrigerant valves. Reconnected all ductwork, gas line, venting, and electrical connections. Installed new condensate drain lines and thermostat. Conducted operational testing of all equipment with satisfactory results, confirming proper system function and performance parameters within manufacturer specifications.
Performed startup service on newly installed air conditioning system at Unit 5. Verified all refrigerant connections on lineset, confirmed system had been properly pressure tested and evacuated, and opened refrigerant valves. Inspected electrical connections at breaker panel and disconnect box, confirmed proper circuit identification and amperage ratings. Checked condensate drain lines for proper installation and flow. Energized system and conducted operational testing of compressor, condenser fan, and thermostat functionality. All components operating within normal parameters, system cooling properly with no abnormalities detected.
Performed seasonal start-up procedure on Unit 4 residential air conditioning system. Verified electrical connections at breaker panel, tested condenser unit operation, and confirmed proper refrigerant pressures using manifold gauge set. System operational with no issues detected.
Performed startup and commissioning of newly installed Unit 3 air conditioning system. Verified all electrical connections at breaker panel, confirmed proper circuit labeling and amperage ratings for AC circuits. Conducted temperature differential testing using infrared thermometers, recording supply air temperature of 89.3°F and return air temperature of 98.8°F. System operating within normal parameters following recent installation that included lineset pressure testing, evacuation, refrigerant valve opening, thermostat installation, and drain line routing.
Completed routine maintenance on 12-year-old furnace and air conditioning system, performing cleaning and verification that all components are operating to factory specifications. Inspected corroded turquoise water pipe in basement utility area showing significant deterioration and paint flaking, documented condition with photographs for estimate preparation. System cleanup performed upon completion.
Performed startup service on Unit 3 air conditioning system following recent Lennox furnace and air conditioner installation. Upon initial startup, system was found to be overcharged with refrigerant, requiring recovery of excess refrigerant to achieve proper operating parameters of 8° subcooling and 17° temperature split across the evaporator coil. System is now operating within manufacturer specifications.
Completed AC start-up for Unit 8 following new system installation. Verified all connections from previous install including flushed lineset, pressure testing, evacuation, and refrigerant valve operation. Confirmed proper operation of furnace and AC systems, gas connections, venting, electrical connections, thermostat functionality, and drain lines. All systems tested and operating within normal parameters.
Completed air conditioning start-up service for Unit 5 following recent furnace and AC system replacement. Reconnected and pressure tested lineset, performed evacuation, and opened refrigerant valves. Reconnected all metal ductwork, gas lines, venting, and electrical connections. Installed new drain lines and thermostat. Verified system operation with temperature readings of 170°F and 192°F at supply registers, confirming proper heating functionality. All equipment tested and operating within normal parameters.
Performed startup service on residential air conditioning system following recent installation. Upon initial inspection, refrigerant charge was found to be slightly low. Added refrigerant to achieve proper subcooling of 9°F, confirming optimal system performance and operational readiness.
Responded to gas leak call at residential property. Upon arrival, conducted thorough inspection of basement utility area containing furnace and dual water heater installation. Used combustible gas detector to systematically check all gas piping connections, valves, and fittings throughout the mechanical room. Identified leak at brass ball valve connection on copper gas supply line. Shut off main gas supply and verified system was safe. Tightened compromised fitting and applied pipe thread sealant to connection. Pressure tested gas line system and confirmed no further leaks detected. Restored gas service and verified proper operation of all appliances. System returned to safe working condition.
Responded to service call for non-operational wall-mounted air conditioning unit and air current issues near front entrance. Inspected and assessed HVAC system performance. Additionally addressed two dripping sink faucets in commercial double-basin stainless steel sink unit, identifying worn valve components causing leaks at both hot and cold water handles.
Performed start-up service on Unit #8 following complete furnace and AC system replacement. Reconnected existing lineset, performed pressure test and evacuation, then opened refrigerant valves to charge system. Reconnected all ductwork, gas line, venting, and electrical connections, ran new condensate drain lines, and installed new thermostat. Verified system operation with temperature readings showing proper split of 33.8°F supply and 42.8°F return air temperatures, confirming adequate cooling performance and successful system commissioning.
Performed seasonal startup on Lennox ML13KC1-024-230A03 air conditioning unit #3. Verified system operation and confirmed proper temperature differential across evaporator coil, measuring 64.2°F return air and 43.1°F supply air, indicating approximately 21°F split within acceptable range. Unit operating normally with R-410A refrigerant charge at manufacturer specifications of 5 lbs 8 oz.
Responded to gas leak detection report from utility company. Located and repaired two gas leaks: one at corrugated piping connection serving gas fireplace, and one at furnace nut fitting requiring replacement. After completing repairs, re-lit gas fireplace, repositioned embers, and performed comprehensive leak check of all connections. Confirmed no gas leaks detected upon final inspection.
Performed startup service on Unit #6 Lennox air conditioning system following complete furnace and AC replacement. Reconnected existing lineset, conducted pressure test, evacuated system, and charged with refrigerant to manufacturer specifications. Reconnected ductwork, gas line, venting, and electrical connections, installed new condensate drain lines and thermostat, and verified all components functioning properly with system operating within normal parameters.
Performed startup and operational testing on newly installed outdoor AC condenser unit #2. Verified refrigerant valves were open and confirmed unit was properly positioned on concrete pad with adequate clearance for airflow and service access. System energized and tested successfully following initial installation.
Completed startup service on Unit #5 following furnace and AC system replacement. Reconnected lineset, performed pressure test and evacuation, opened refrigerant valves, and reconnected gas, vent, and electrical connections. Ran new drain lines, installed new thermostat, and verified all system operations tested within normal parameters.
Completed full system replacement including furnace and air conditioning units at residential property. Installed new Lennox ML13KC1-024-230A03 condenser unit (manufactured 10/2025) with R-454B refrigerant on exterior concrete pad. Flushed existing lineset, reconnected refrigerant lines, performed pressure test and evacuation to manufacturer specifications. Reconnected gas supply, venting system, and electrical connections to code. Installed new condensate drain lines and programmed new thermostat for system operation. Conducted startup procedures and operational testing of complete HVAC system with all parameters within normal operating range.
Responded to service call for Goodman rooftop unit with faulty pressure switch. Diagnosed pressure switch failure and successfully replaced defective component with new pressure switch, restoring proper unit operation and safety controls.
