Need plumbing, heating, cooling, or electrical help in Madison? Call Action at (608) 291-9165 to arrange service. Describe what has stopped working, where you see the problem, and whether you need an urgent repair or are planning an upgrade.
A century-old home near the Madison isthmus can have very different plumbing, heating, cooling, and electrical needs than a newer property on the far west side. Older homes around Williamson Street, Tenney-Lapham, Marquette, and Vilas may still rely on boilers, aging piping, older panels, or retrofitted cooling systems, while newer homes are more likely to need support for Heat pumps, EV chargers, and higher electrical loads. Action Plumbing, Heating, AC & Electric has served the Madison area since 1989 and maintains a local presence on South Midvale Boulevard.
Our technicians provide heating, air conditioning, plumbing, and electrical services throughout Madison, including ZIP codes 53703, 53704, 53705, 53711, 53713, 53714, 53715, 53716, 53717, 53718, and 53719. Whether you have an unexpected breakdown or are planning an upgrade, call Action at (608) 291-9165 or contact us online to schedule service in Madison, WI.
Find the Right Service for Your Home
A repair, a planned replacement, and routine maintenance call for different conversations. These starting points can help you find the service that fits what is happening at your property.
- No heat or unreliable comfort: Start with heating repair. For seasonal upkeep, explore heating maintenance.
- Warm rooms in summer: Explore AC repair or ductless options for spaces without existing ductwork.
- Leaks, drains, or hot-water trouble: Find leak repair, sewer and drain services, and water heater services.
- Planning an electrical upgrade: Review panel changes, EV charging, and backup generators.
Need help?
608-291-9165Local Home Services for Madison Properties
Madison’s housing stock changes considerably from one side of the city to another. Pre-1940 homes are concentrated around the isthmus and older central neighborhoods, while areas farther from downtown contain large numbers of homes built from the 1950s through the 1970s. Continued expansion toward Madison’s outer edges has also introduced newer construction with different HVAC, plumbing, and electrical demands.
That variety matters when diagnosing problems or planning upgrades. An older property near Atwood Avenue may have gone through several rounds of plumbing or electrical modifications, while a west-side home may be approaching replacement age for its furnace, central air conditioner, or panel. Action’s local Madison presence gives homeowners access to a team familiar with systems found throughout the city and surrounding Dane County communities.
Air Conditioning Services in Madison, WI
Madison summers can bring hot, humid stretches that place heavy demands on cooling equipment. Older homes around the isthmus, Marquette, Tenney-Lapham, and Vilas can be especially challenging because many were built before modern duct systems and whole-home cooling became standard. Action services traditional central air systems, Ductless mini-splits, and heat pumps for homes across the city.
Our Madison cooling services include:
- 24/7 emergency AC repair during Madison heat waves
- Air conditioning installation for older and newer homes
- Air conditioning repair
- Preventive AC maintenance before July and August heat
- Central air conditioning
- Ductless mini-splits for older Madison properties
- Heat pumps for efficient year-round comfort
- Indoor air quality services
- Commercial air conditioning throughout Madison
Heating Services in Madison, WI
Madison heating systems have to perform through long winters, repeated freezes, and cold snaps that can send temperatures well below freezing. Furnaces are common throughout the city, but boilers remain part of the housing landscape in older neighborhoods near Williamson Street, Marquette, Tenney-Lapham, and the isthmus. Heat pumps are also becoming a stronger option for homeowners interested in efficiency and electrification.
Action provides:
- Emergency heating repair during Wisconsin cold snaps
- Heating installation for Madison homes
- Heating maintenance before winter arrives
- Heating repair
- Furnace repair and replacement
- Boiler service for older Madison properties
- Heat pump installation and replacement
- Heat pump repair
- Heat pump maintenance
- Indoor air quality services for dry winter conditions
Plumbing Services in Madison, WI
Madison’s plumbing needs are shaped by housing age, groundwater conditions, and naturally hard municipal water. Homes near downtown, UW-Madison, and the near east side may contain piping that has been repaired, replaced, or modified several times, while mid-century homes throughout the city are also reaching an age where original pipes, drains, fixtures, and water heaters may need attention. Mineral-heavy water can also contribute to scale inside water heaters, fixtures, and water-using appliances.
Our plumbing services include:
- Emergency plumbing throughout Madison
- Plumbing repair for older and newer homes
- Leak detection for aging Madison plumbing systems
- Kitchen plumbing
- Bathroom plumbing
- Faucets and fixtures
- Commercial plumbing
- Gas lines
- Sewer and drain services
- Water heater repair and replacement
- Water softeners for Madison’s hard water
- Water filtration
- Piping and repiping for older homes
- Pipe replacement and repair
- Well systems in surrounding Dane County areas
Properties near Lake Mendota, Lake Monona, and the Yahara River corridor can also face drainage concerns during spring thaw and periods of heavy rainfall. Saturated soil and higher groundwater levels can place more pressure on basement drainage and sump systems, while aging plumbing can be more vulnerable to leaks or failures. Professional leak detection, drain service, pipe repair, and water treatment can help address those issues before they become larger problems.
Need help?
608-291-9165Electrical Services in Madison, WI
Madison homes are being asked to support more electrical demand than ever before. Older properties were never designed for today’s combination of central air conditioning, EV chargers, heat pumps, home offices, large appliances, and connected electronics. In established neighborhoods, that can make electrical capacity just as important as the condition of the equipment being installed.
Action’s electrical services include:
- Generators for Madison power outages
- EV charger installation for home charging
- Whole-home surge protection for storm season
- Electrical service upgrades for older homes
- Meter base and panel changes
- Interior and exterior lighting
- Dedicated circuits and outlets for modern equipment
- Equipment hookup and repair
- Commercial electrical services throughout Madison
For help planning an electrical upgrade, HVAC replacement, or another project that involves multiple systems, call (608) 291-9165 or contact Action online.
Why Madison Homeowners Choose Action
Action has served Madison and the surrounding area since 1989. That experience spans decades of neighborhood growth, changing building systems, and new home technology. The company also maintains a local Madison presence on South Midvale Boulevard.
Homeowners can turn to Action for:
- 24/7 emergency service
- Plumbing, HVAC, and electrical expertise
- Licensed and insured technicians
- Upfront pricing
- Water heater installation; ask about availability and offer conditions
- A 100% customer satisfaction guarantee
- Local service backed by decades of experience
Our goal is to identify the problem clearly, explain the available options, and provide a solution that makes sense for the home. That approach is especially important in Madison, where a house near Capitol Square can have very different systems and service needs than a newer property several miles west or east.
Schedule Plumbing, HVAC or Electrical Service in Madison, WI
A Madison home near Lake Monona may need help with drainage or aging plumbing, while an older property near the isthmus may be dealing with boiler heat, dated electrical infrastructure, or cooling challenges. Homes farther west and east may be approaching furnace or AC replacement or preparing for newer upgrades such as heat pumps and EV chargers.
Action Plumbing, Heating, AC & Electric has served the Madison area since 1989 and provides plumbing, heating, air conditioning, and electrical services throughout the city. Whether you need maintenance, repairs, replacement equipment, or emergency help, call (608) 291-9165 or contact Action online today to schedule service in Madison, WI.
Repair or Replacement: Make a Plan for Your Madison Home
A recurring breakdown, uneven comfort, a leak, or a tripping circuit deserves a diagnosis before you commit to new equipment. Explain when the problem started, what has changed, and any previous repairs. The age of the equipment is useful context, but its condition and the cause of the problem matter too.
For a replacement or larger upgrade, ask how the proposed work fits the rest of your home. Heating and cooling equipment can depend on airflow and electrical capacity; water heaters depend on the available space, connections, and demand. Compare the recommended scope, expected maintenance, and available alternatives so you can make an informed decision.
Questions About Home Services in Madison, WI
Can a Madison home with boiler heat add air conditioning?
Yes, a home without existing cooling ducts may be a candidate for ductless cooling. The right choice depends on room layout, insulation, available electrical capacity, and the equipment already in place. An assessment can compare options without assuming the boiler must be removed.
Does Action offer emergency service?
Action advertises 24/7 emergency service. Call (608) 291-9165, explain the issue, and confirm the availability and next steps for your address. Emergency service availability does not guarantee a specific arrival time.
What information should I have ready when I call?
Have your service address, the symptoms, and any accessible equipment details ready. Mention recent repairs and whether the problem affects one fixture or room, or the whole home. You do not need to diagnose the issue yourself.
Arrange Service in Madison, WI
Call (608) 291-9165 to discuss a repair, maintenance visit, or home improvement project with Action Plumbing, Heating, AC & Electric. Explain your priorities so the team can help you plan the next step.
Need help?
608-291-9165Recent Jobs and Reviews in Madison, WI
Madison, WI at a glance
Action Plumbing, Heating, AC & Electric has completed 20 jobs in Madison, WI in March 2026.
The most recent job was on March 31, 2026.
Action Plumbing, Heating, AC & Electric has completed 616 jobs in Madison, WI in the last 12 months.
Job Locations and Reviews
Responded to gas leak call on residential furnace system. Upon inspection, identified gas leaking through the gas valve into the burners. Replaced defective gas valve and gas supply whip. Performed combustion analysis with CO reading of 7 ppm, which is within acceptable limits. Verified proper ignition and burner operation. Conducted thorough leak check of furnace cabinet and blower compartment with no additional leaks detected. Unit returned to safe operating condition.
Responded to service call for non-functional humidifier system that had been previously disabled during February visit. Upon inspection, found humidifier unit contained heavily contaminated water and required maintenance. Performed complete cleaning of humidifier unit, replaced evaporator pad, and verified proper drainage operation to restore system to full working condition.
Responded to service call for water accumulation under furnace. Upon inspection, identified moisture issue in basement mechanical room near Lennox furnace and air handler system. Replaced air filter with homeowner-supplied #35 X2661 filter per manufacturer specifications. Documented HVAC system installation including blower unit, ductwork, and associated components in attic crawl space and basement locations. Verified system operation and confirmed no active leaks present at time of service completion.
Performed AC startup service on newly installed air conditioning system at Unit 8. Verified system operation by checking refrigerant pressures and subcool measurements using manifold gauges, confirming all readings within manufacturer specifications. System operating properly with no issues detected.
Completed startup and commissioning of newly installed air conditioning system at Unit 6. Reconnected, pressure tested, and evacuated existing lineset, then opened refrigerant valves and verified proper refrigerant charge by setting operating pressures and subcooling to manufacturer specifications. All system components tested and operating within normal parameters.
Performed startup and commissioning on newly installed Unit 3 air conditioning system. Connected refrigerant gauges and verified system pressures, adjusted refrigerant charge to manufacturer specifications, and confirmed proper subcooling levels. Conducted full operational testing of condenser unit to ensure proper performance and system functionality.
Performed steam heating system maintenance including valve replacement and radiator balancing. Corrected one improperly installed steam vent that was positioned upside down and replaced a total of three defective steam vents throughout the system to restore proper operation and efficiency.
Performed seasonal air conditioning startup on recently installed unit. Connected refrigerant manifold gauges to verify system pressures and temperatures, confirmed proper refrigerant charge levels, and validated operational parameters. System is running properly with all readings within manufacturer specifications.
Performed seasonal startup on Lennox air conditioning unit #6 following recent installation of new furnace, A/C system, and thermostat. System had previously undergone nitrogen pressure testing and vacuum procedures but had not been operated due to weather conditions. Completed full AC startup procedures, verified unit operational status, and documented equipment condition with photos showing condenser unit properly positioned on concrete pad with adequate clearance.
Performed seasonal air conditioning startup on outdoor condensing unit. Inspected unit condition, verified proper operation of compressor and condenser fan, and confirmed system is ready for cooling season. Unit found in good operating condition with no visible damage or immediate service concerns.
Performed seasonal startup and system diagnostic on Lennox residential air conditioning unit. Connected Fieldpiece digital manifold gauges to measure refrigerant pressures and temperatures across the system. All readings were within normal operating parameters, confirming proper refrigerant charge and system performance. Unit activated successfully and running as designed.
Responded to no heat call on Goodman direct vent forced air furnace, model GY9S00B12UP11J. Upon inspection, diagnosed insufficient vacuum at pressure switch preventing unit operation. Testing revealed inducer motor failure causing inadequate draft pressure to satisfy safety controls. Provided customer with repair options including inducer motor replacement or complete furnace replacement given unit age and condition.
Responded to warranty call for recently installed furnace experiencing severe vibration and shaking. Upon inspection, discovered air filter had collapsed with metal mesh completely missing, having been drawn into the system due to excessive negative pressure. Determined cold air return duct was undersized for the furnace specifications, creating insufficient airflow and causing the filter failure. Removed damaged filter debris from system, took measurements of existing cold air return for proper resizing and fabrication to prevent recurrence of the issue.
Responded to no heat call where thermostat was reported as not working. Upon inspection, diagnosed failed capacitor on the draft inducer motor. Removed defective inducer assembly and installed new replacement inducer motor. Verified proper operation of furnace, confirmed ignition sequence, and tested heating cycle. Unit restored to normal operation with adequate heat output.
Responded to no heat call and identified improperly wired thermostat causing system malfunction and overheating of conditioned space. Diagnosed incorrect wiring configuration on Honeywell Home thermostat connected to ComfortMaker furnace unit. Corrected thermostat wiring per manufacturer specifications and replaced blown fuse. Verified proper system operation, confirmed heating cycle functionality, and ensured thermostat communication with furnace. System restored to normal operation with accurate temperature control.
Performed seasonal air conditioning startup and system inspection. Connected manifold gauge set to outdoor condenser unit to verify refrigerant pressures and system operation. Utilized digital temperature measurement tools to check supply and return air temperatures, confirming proper cooling differential. Addressed customer inquiry regarding previously repaired heating system. Verified outdoor unit had protective winter cover in place, which was removed for seasonal startup. All system parameters checked and found operating within normal specifications.
Responded to no-heat call and diagnosed furnace displaying error code 272 indicating pressure switch failure. Verified pressure switch malfunction using digital manometer, which showed readings fluctuating between 1.35 to 51 inches of water column vacuum, outside normal operating parameters. Replaced defective Honeywell pressure switch with new unit, tested system operation, and confirmed furnace returned to normal heating cycle.
Responded to customer complaint of exhaust odor in furnace room following recent repair. Conducted thorough inspection of furnace combustion system, venting components, and draft inducer motor operation. Verified no gas leaks present and confirmed carbon monoxide detector functioning properly outside furnace room. Inspected all recent work including pressure switches, gaskets, and flue pipe connections for proper sealing. Tested draft inducer blower motor for adequate airflow and checked exhaust venting system for blockages or improper termination. Documented findings with photos of utility room equipment and plumbing installations for customer records.
Completed comprehensive furnace tune-up and inspection on Lennox heating system. Replaced furnace filter and installed model #35 filter in Aprilaire 2400 whole-house humidifier system per customer request. Performed standard maintenance procedures including system diagnostics, safety checks, and operational testing. All equipment found to be functioning within normal parameters. Customer inquired about thermostat evaluation and potential humidifier replacement for future consideration.
Replaced defective fan limit switch on residential furnace. Installed new fan control switch to restore proper blower operation and temperature regulation. System tested and confirmed operational upon completion.
