Need plumbing, heating, cooling, or electrical help in Madison? Call Action at (608) 291-9165 to arrange service. Describe what has stopped working, where you see the problem, and whether you need an urgent repair or are planning an upgrade.
A century-old home near the Madison isthmus can have very different plumbing, heating, cooling, and electrical needs than a newer property on the far west side. Older homes around Williamson Street, Tenney-Lapham, Marquette, and Vilas may still rely on boilers, aging piping, older panels, or retrofitted cooling systems, while newer homes are more likely to need support for Heat pumps, EV chargers, and higher electrical loads. Action Plumbing, Heating, AC & Electric has served the Madison area since 1989 and maintains a local presence on South Midvale Boulevard.
Our technicians provide heating, air conditioning, plumbing, and electrical services throughout Madison, including ZIP codes 53703, 53704, 53705, 53711, 53713, 53714, 53715, 53716, 53717, 53718, and 53719. Whether you have an unexpected breakdown or are planning an upgrade, call Action at (608) 291-9165 or contact us online to schedule service in Madison, WI.
Find the Right Service for Your Home
A repair, a planned replacement, and routine maintenance call for different conversations. These starting points can help you find the service that fits what is happening at your property.
- No heat or unreliable comfort: Start with heating repair. For seasonal upkeep, explore heating maintenance.
- Warm rooms in summer: Explore AC repair or ductless options for spaces without existing ductwork.
- Leaks, drains, or hot-water trouble: Find leak repair, sewer and drain services, and water heater services.
- Planning an electrical upgrade: Review panel changes, EV charging, and backup generators.
Need help?
608-291-9165Local Home Services for Madison Properties
Madison’s housing stock changes considerably from one side of the city to another. Pre-1940 homes are concentrated around the isthmus and older central neighborhoods, while areas farther from downtown contain large numbers of homes built from the 1950s through the 1970s. Continued expansion toward Madison’s outer edges has also introduced newer construction with different HVAC, plumbing, and electrical demands.
That variety matters when diagnosing problems or planning upgrades. An older property near Atwood Avenue may have gone through several rounds of plumbing or electrical modifications, while a west-side home may be approaching replacement age for its furnace, central air conditioner, or panel. Action’s local Madison presence gives homeowners access to a team familiar with systems found throughout the city and surrounding Dane County communities.
Air Conditioning Services in Madison, WI
Madison summers can bring hot, humid stretches that place heavy demands on cooling equipment. Older homes around the isthmus, Marquette, Tenney-Lapham, and Vilas can be especially challenging because many were built before modern duct systems and whole-home cooling became standard. Action services traditional central air systems, Ductless mini-splits, and heat pumps for homes across the city.
Our Madison cooling services include:
- 24/7 emergency AC repair during Madison heat waves
- Air conditioning installation for older and newer homes
- Air conditioning repair
- Preventive AC maintenance before July and August heat
- Central air conditioning
- Ductless mini-splits for older Madison properties
- Heat pumps for efficient year-round comfort
- Indoor air quality services
- Commercial air conditioning throughout Madison
Heating Services in Madison, WI
Madison heating systems have to perform through long winters, repeated freezes, and cold snaps that can send temperatures well below freezing. Furnaces are common throughout the city, but boilers remain part of the housing landscape in older neighborhoods near Williamson Street, Marquette, Tenney-Lapham, and the isthmus. Heat pumps are also becoming a stronger option for homeowners interested in efficiency and electrification.
Action provides:
- Emergency heating repair during Wisconsin cold snaps
- Heating installation for Madison homes
- Heating maintenance before winter arrives
- Heating repair
- Furnace repair and replacement
- Boiler service for older Madison properties
- Heat pump installation and replacement
- Heat pump repair
- Heat pump maintenance
- Indoor air quality services for dry winter conditions
Plumbing Services in Madison, WI
Madison’s plumbing needs are shaped by housing age, groundwater conditions, and naturally hard municipal water. Homes near downtown, UW-Madison, and the near east side may contain piping that has been repaired, replaced, or modified several times, while mid-century homes throughout the city are also reaching an age where original pipes, drains, fixtures, and water heaters may need attention. Mineral-heavy water can also contribute to scale inside water heaters, fixtures, and water-using appliances.
Our plumbing services include:
- Emergency plumbing throughout Madison
- Plumbing repair for older and newer homes
- Leak detection for aging Madison plumbing systems
- Kitchen plumbing
- Bathroom plumbing
- Faucets and fixtures
- Commercial plumbing
- Gas lines
- Sewer and drain services
- Water heater repair and replacement
- Water softeners for Madison’s hard water
- Water filtration
- Piping and repiping for older homes
- Pipe replacement and repair
- Well systems in surrounding Dane County areas
Properties near Lake Mendota, Lake Monona, and the Yahara River corridor can also face drainage concerns during spring thaw and periods of heavy rainfall. Saturated soil and higher groundwater levels can place more pressure on basement drainage and sump systems, while aging plumbing can be more vulnerable to leaks or failures. Professional leak detection, drain service, pipe repair, and water treatment can help address those issues before they become larger problems.
Need help?
608-291-9165Electrical Services in Madison, WI
Madison homes are being asked to support more electrical demand than ever before. Older properties were never designed for today’s combination of central air conditioning, EV chargers, heat pumps, home offices, large appliances, and connected electronics. In established neighborhoods, that can make electrical capacity just as important as the condition of the equipment being installed.
Action’s electrical services include:
- Generators for Madison power outages
- EV charger installation for home charging
- Whole-home surge protection for storm season
- Electrical service upgrades for older homes
- Meter base and panel changes
- Interior and exterior lighting
- Dedicated circuits and outlets for modern equipment
- Equipment hookup and repair
- Commercial electrical services throughout Madison
For help planning an electrical upgrade, HVAC replacement, or another project that involves multiple systems, call (608) 291-9165 or contact Action online.
Why Madison Homeowners Choose Action
Action has served Madison and the surrounding area since 1989. That experience spans decades of neighborhood growth, changing building systems, and new home technology. The company also maintains a local Madison presence on South Midvale Boulevard.
Homeowners can turn to Action for:
- 24/7 emergency service
- Plumbing, HVAC, and electrical expertise
- Licensed and insured technicians
- Upfront pricing
- Water heater installation; ask about availability and offer conditions
- A 100% customer satisfaction guarantee
- Local service backed by decades of experience
Our goal is to identify the problem clearly, explain the available options, and provide a solution that makes sense for the home. That approach is especially important in Madison, where a house near Capitol Square can have very different systems and service needs than a newer property several miles west or east.
Schedule Plumbing, HVAC or Electrical Service in Madison, WI
A Madison home near Lake Monona may need help with drainage or aging plumbing, while an older property near the isthmus may be dealing with boiler heat, dated electrical infrastructure, or cooling challenges. Homes farther west and east may be approaching furnace or AC replacement or preparing for newer upgrades such as heat pumps and EV chargers.
Action Plumbing, Heating, AC & Electric has served the Madison area since 1989 and provides plumbing, heating, air conditioning, and electrical services throughout the city. Whether you need maintenance, repairs, replacement equipment, or emergency help, call (608) 291-9165 or contact Action online today to schedule service in Madison, WI.
Repair or Replacement: Make a Plan for Your Madison Home
A recurring breakdown, uneven comfort, a leak, or a tripping circuit deserves a diagnosis before you commit to new equipment. Explain when the problem started, what has changed, and any previous repairs. The age of the equipment is useful context, but its condition and the cause of the problem matter too.
For a replacement or larger upgrade, ask how the proposed work fits the rest of your home. Heating and cooling equipment can depend on airflow and electrical capacity; water heaters depend on the available space, connections, and demand. Compare the recommended scope, expected maintenance, and available alternatives so you can make an informed decision.
Questions About Home Services in Madison, WI
Can a Madison home with boiler heat add air conditioning?
Yes, a home without existing cooling ducts may be a candidate for ductless cooling. The right choice depends on room layout, insulation, available electrical capacity, and the equipment already in place. An assessment can compare options without assuming the boiler must be removed.
Does Action offer emergency service?
Action advertises 24/7 emergency service. Call (608) 291-9165, explain the issue, and confirm the availability and next steps for your address. Emergency service availability does not guarantee a specific arrival time.
What information should I have ready when I call?
Have your service address, the symptoms, and any accessible equipment details ready. Mention recent repairs and whether the problem affects one fixture or room, or the whole home. You do not need to diagnose the issue yourself.
Arrange Service in Madison, WI
Call (608) 291-9165 to discuss a repair, maintenance visit, or home improvement project with Action Plumbing, Heating, AC & Electric. Explain your priorities so the team can help you plan the next step.
Need help?
608-291-9165Recent Jobs and Reviews in Madison, WI
Madison, WI at a glance
Action Plumbing, Heating, AC & Electric has completed 20 jobs in Madison, WI in April 2026.
The most recent job was on April 16, 2026.
Action Plumbing, Heating, AC & Electric has completed 616 jobs in Madison, WI in the last 12 months.
Job Locations and Reviews
Responded to no cooling call on 2022 Lennox system. Diagnosed locked rotor compressor causing outdoor unit failure and refrigerant leak. Verified compressor amperage draw with clamp meter showing abnormal readings, confirming mechanical failure requiring compressor replacement.
Performed seasonal startup and system commissioning on Lennox air conditioning unit that was installed during fall season. Verified proper operation of condenser unit, confirmed adequate temperature differential across system with supply air at 103.1°F and return air at 123.1°F, and completed full operational checkout with all parameters within normal range.
Responded to no heat call on residential gas furnace that was previously shut down due to cracked heat exchanger. Upon inspection, confirmed extensive deterioration and corrosion on heat exchanger with visible surface degradation, rust patterns, and compromised metal integrity presenting serious safety hazard. Unit deemed unsafe for operation due to crack allowing potential carbon monoxide exposure. Documented conditions with photos and provided system replacement quote to customer.
Responded to service call for non-operational air conditioning system with water discharge from furnace cabinet. Upon arrival, inspected multiple outdoor condenser units and indoor air handler assembly. Identified condensate drain blockage causing water overflow from furnace main body. Cleared obstruction from condensate line, verified proper drainage flow, and tested system operation. All three condenser units (#3 marked units) confirmed operational with proper refrigerant flow and electrical connections secure at disconnect boxes. System restored to normal cooling operation with no further water leakage observed.
Performed spring startup and system commissioning on air conditioning unit that was installed in January. Conducted operational testing with digital thermometers to verify proper temperature differentials across the system. Completed full system checkout to ensure unit is functioning correctly for the cooling season.
Completed seasonal maintenance and startup on residential air conditioning system. Performed thorough inspection of outdoor condenser unit, verified proper operation of all components, and measured system temperatures to confirm cooling performance within manufacturer specifications. Unit is now operational and ready for the cooling season.
Completed prepaid cleaning and check on residential air conditioning system. Condenser coil was found dirty and thoroughly washed to restore proper airflow and heat transfer efficiency. Inspected and tested capacitor, contactor relay, and refrigerant charge—all components verified to be operating within normal parameters with no deficiencies noted.
Responded to callback for recurring system leak at apartment unit #3. Upon arrival, found significant water accumulation on concrete floor beneath HVAC equipment, with extensive rust-colored staining indicating ongoing moisture issue. Documented active leak condition with photographs showing water damage pattern and affected Lennox furnace/air handler unit. System requires further diagnostic work to identify and repair leak source.
Completed annual inspection and preventative maintenance on residential furnace and air conditioning system. Performed thorough cleaning and operational checks on both heating and cooling units, verified system specifications, inspected ductwork and connections, and confirmed all components operating within normal parameters.
Responded to failed city inspection for furnace and air conditioning system. Corrected a 2-foot section of improperly bent PVC exhaust piping on furnace venting system to meet code requirements. Replaced incorrect amperage breaker for air conditioning unit, as the existing 30/40 amp breaker did not match equipment specifications, installing proper sized breaker per manufacturer requirements and local electrical code to pass inspection.
Performed comprehensive clean and check service on Trane combo heating/cooling air handler unit. Replaced dirty air filter and conducted complete system inspection, verifying proper operation of both heating and cooling functions. All components found to be operating within normal parameters.
Performed scheduled furnace clean and check as part of prepaid maintenance package. Identified and replaced clogged humidifier filter on system. Measured carbon monoxide levels, recording 20 ppm on downstairs unit and 10 ppm on upstairs unit, both within acceptable operating range.
Completed prepaid cooling maintenance visit on Goodman outdoor condensing unit. Performed standard seasonal maintenance inspection and testing procedures. Connected diagnostic manifold gauges to measure system pressures and temperatures across the refrigerant circuit. Recorded operating parameters including suction and discharge pressures, subcooling, and superheat values to verify proper refrigerant charge and system performance. Unit operating within normal specifications at time of service. Condensing unit exterior showed typical weathering with accumulated dirt and debris on coil surfaces and cabinet. Documented equipment condition and system readings with photos for service records.
Responded to no heat call on recently installed Lennox furnace system. Upon arrival, accessed unit and inspected internal components, electrical connections, and control board. Verified proper wiring configuration, blower motor operation, and PVC intake/exhaust venting system. Troubleshot and resolved issue preventing furnace from producing heat. Unit tested and confirmed operational with proper heating output restored.
Completed bi-annual preventive maintenance inspection on residential gas furnace and water softener system. Performed comprehensive furnace check including visual inspection of blower motor assembly, electrical connections, gas supply line and shut-off valve, and ductwork connections. Verified proper operation of all internal components with access panel opened for thorough examination. Conducted water softener inspection including evaluation of control head functionality and overall system condition. All equipment found to be operating within normal parameters at time of service.
Responded to service call for furnace that failed home inspection prior to property sale. Secured loose safety switch tape on interior furnace panel and reattached loose tape on front access panel to meet code compliance requirements. Documented all corrections with photographs for inspection records.
Responded to no heat call on Lennox furnace. Upon arrival, found furnace blower motor operating but unit not producing heat. Diagnosed faulty thermostat preventing proper heating cycle initiation. Removed and replaced defective thermostat with new unit, restored proper system operation, and verified furnace now heating correctly.
Performed state-required furnace inspection and identified critical safety hazard with carbon monoxide levels measuring 116 PPM in flue gases, exceeding safe operational limits. Due to dangerous CO levels posing immediate health risk, unit was red-tagged and taken out of service per safety regulations. Additionally noted heavily soiled air filter requiring replacement, with significant dust and debris accumulation throughout mesh structure affecting system airflow and efficiency.
Responded to no-heat call on RV furnace unit. Previous service provider had diagnosed failed igniter with zero ohm reading. Confirmed diagnosis and replaced defective igniter. Verified proper combustion with blue flame established in burner chamber. Tested unit operation and confirmed heating system restored to full functionality.
Completed routine maintenance on dual outdoor condensing units. Performed comprehensive clean and check procedure including inspection of both systems, verification of proper operation, and testing of electrical components. All units found to be functioning within normal parameters with no immediate service concerns identified.
