Need plumbing, heating, cooling, or electrical help in Madison? Call Action at (608) 291-9165 to arrange service. Describe what has stopped working, where you see the problem, and whether you need an urgent repair or are planning an upgrade.
A century-old home near the Madison isthmus can have very different plumbing, heating, cooling, and electrical needs than a newer property on the far west side. Older homes around Williamson Street, Tenney-Lapham, Marquette, and Vilas may still rely on boilers, aging piping, older panels, or retrofitted cooling systems, while newer homes are more likely to need support for Heat pumps, EV chargers, and higher electrical loads. Action Plumbing, Heating, AC & Electric has served the Madison area since 1989 and maintains a local presence on South Midvale Boulevard.
Our technicians provide heating, air conditioning, plumbing, and electrical services throughout Madison, including ZIP codes 53703, 53704, 53705, 53711, 53713, 53714, 53715, 53716, 53717, 53718, and 53719. Whether you have an unexpected breakdown or are planning an upgrade, call Action at (608) 291-9165 or contact us online to schedule service in Madison, WI.
Find the Right Service for Your Home
A repair, a planned replacement, and routine maintenance call for different conversations. These starting points can help you find the service that fits what is happening at your property.
- No heat or unreliable comfort: Start with heating repair. For seasonal upkeep, explore heating maintenance.
- Warm rooms in summer: Explore AC repair or ductless options for spaces without existing ductwork.
- Leaks, drains, or hot-water trouble: Find leak repair, sewer and drain services, and water heater services.
- Planning an electrical upgrade: Review panel changes, EV charging, and backup generators.
Need help?
608-291-9165Local Home Services for Madison Properties
Madison’s housing stock changes considerably from one side of the city to another. Pre-1940 homes are concentrated around the isthmus and older central neighborhoods, while areas farther from downtown contain large numbers of homes built from the 1950s through the 1970s. Continued expansion toward Madison’s outer edges has also introduced newer construction with different HVAC, plumbing, and electrical demands.
That variety matters when diagnosing problems or planning upgrades. An older property near Atwood Avenue may have gone through several rounds of plumbing or electrical modifications, while a west-side home may be approaching replacement age for its furnace, central air conditioner, or panel. Action’s local Madison presence gives homeowners access to a team familiar with systems found throughout the city and surrounding Dane County communities.
Air Conditioning Services in Madison, WI
Madison summers can bring hot, humid stretches that place heavy demands on cooling equipment. Older homes around the isthmus, Marquette, Tenney-Lapham, and Vilas can be especially challenging because many were built before modern duct systems and whole-home cooling became standard. Action services traditional central air systems, Ductless mini-splits, and heat pumps for homes across the city.
Our Madison cooling services include:
- 24/7 emergency AC repair during Madison heat waves
- Air conditioning installation for older and newer homes
- Air conditioning repair
- Preventive AC maintenance before July and August heat
- Central air conditioning
- Ductless mini-splits for older Madison properties
- Heat pumps for efficient year-round comfort
- Indoor air quality services
- Commercial air conditioning throughout Madison
Heating Services in Madison, WI
Madison heating systems have to perform through long winters, repeated freezes, and cold snaps that can send temperatures well below freezing. Furnaces are common throughout the city, but boilers remain part of the housing landscape in older neighborhoods near Williamson Street, Marquette, Tenney-Lapham, and the isthmus. Heat pumps are also becoming a stronger option for homeowners interested in efficiency and electrification.
Action provides:
- Emergency heating repair during Wisconsin cold snaps
- Heating installation for Madison homes
- Heating maintenance before winter arrives
- Heating repair
- Furnace repair and replacement
- Boiler service for older Madison properties
- Heat pump installation and replacement
- Heat pump repair
- Heat pump maintenance
- Indoor air quality services for dry winter conditions
Plumbing Services in Madison, WI
Madison’s plumbing needs are shaped by housing age, groundwater conditions, and naturally hard municipal water. Homes near downtown, UW-Madison, and the near east side may contain piping that has been repaired, replaced, or modified several times, while mid-century homes throughout the city are also reaching an age where original pipes, drains, fixtures, and water heaters may need attention. Mineral-heavy water can also contribute to scale inside water heaters, fixtures, and water-using appliances.
Our plumbing services include:
- Emergency plumbing throughout Madison
- Plumbing repair for older and newer homes
- Leak detection for aging Madison plumbing systems
- Kitchen plumbing
- Bathroom plumbing
- Faucets and fixtures
- Commercial plumbing
- Gas lines
- Sewer and drain services
- Water heater repair and replacement
- Water softeners for Madison’s hard water
- Water filtration
- Piping and repiping for older homes
- Pipe replacement and repair
- Well systems in surrounding Dane County areas
Properties near Lake Mendota, Lake Monona, and the Yahara River corridor can also face drainage concerns during spring thaw and periods of heavy rainfall. Saturated soil and higher groundwater levels can place more pressure on basement drainage and sump systems, while aging plumbing can be more vulnerable to leaks or failures. Professional leak detection, drain service, pipe repair, and water treatment can help address those issues before they become larger problems.
Need help?
608-291-9165Electrical Services in Madison, WI
Madison homes are being asked to support more electrical demand than ever before. Older properties were never designed for today’s combination of central air conditioning, EV chargers, heat pumps, home offices, large appliances, and connected electronics. In established neighborhoods, that can make electrical capacity just as important as the condition of the equipment being installed.
Action’s electrical services include:
- Generators for Madison power outages
- EV charger installation for home charging
- Whole-home surge protection for storm season
- Electrical service upgrades for older homes
- Meter base and panel changes
- Interior and exterior lighting
- Dedicated circuits and outlets for modern equipment
- Equipment hookup and repair
- Commercial electrical services throughout Madison
For help planning an electrical upgrade, HVAC replacement, or another project that involves multiple systems, call (608) 291-9165 or contact Action online.
Why Madison Homeowners Choose Action
Action has served Madison and the surrounding area since 1989. That experience spans decades of neighborhood growth, changing building systems, and new home technology. The company also maintains a local Madison presence on South Midvale Boulevard.
Homeowners can turn to Action for:
- 24/7 emergency service
- Plumbing, HVAC, and electrical expertise
- Licensed and insured technicians
- Upfront pricing
- Water heater installation; ask about availability and offer conditions
- A 100% customer satisfaction guarantee
- Local service backed by decades of experience
Our goal is to identify the problem clearly, explain the available options, and provide a solution that makes sense for the home. That approach is especially important in Madison, where a house near Capitol Square can have very different systems and service needs than a newer property several miles west or east.
Schedule Plumbing, HVAC or Electrical Service in Madison, WI
A Madison home near Lake Monona may need help with drainage or aging plumbing, while an older property near the isthmus may be dealing with boiler heat, dated electrical infrastructure, or cooling challenges. Homes farther west and east may be approaching furnace or AC replacement or preparing for newer upgrades such as heat pumps and EV chargers.
Action Plumbing, Heating, AC & Electric has served the Madison area since 1989 and provides plumbing, heating, air conditioning, and electrical services throughout the city. Whether you need maintenance, repairs, replacement equipment, or emergency help, call (608) 291-9165 or contact Action online today to schedule service in Madison, WI.
Repair or Replacement: Make a Plan for Your Madison Home
A recurring breakdown, uneven comfort, a leak, or a tripping circuit deserves a diagnosis before you commit to new equipment. Explain when the problem started, what has changed, and any previous repairs. The age of the equipment is useful context, but its condition and the cause of the problem matter too.
For a replacement or larger upgrade, ask how the proposed work fits the rest of your home. Heating and cooling equipment can depend on airflow and electrical capacity; water heaters depend on the available space, connections, and demand. Compare the recommended scope, expected maintenance, and available alternatives so you can make an informed decision.
Questions About Home Services in Madison, WI
Can a Madison home with boiler heat add air conditioning?
Yes, a home without existing cooling ducts may be a candidate for ductless cooling. The right choice depends on room layout, insulation, available electrical capacity, and the equipment already in place. An assessment can compare options without assuming the boiler must be removed.
Does Action offer emergency service?
Action advertises 24/7 emergency service. Call (608) 291-9165, explain the issue, and confirm the availability and next steps for your address. Emergency service availability does not guarantee a specific arrival time.
What information should I have ready when I call?
Have your service address, the symptoms, and any accessible equipment details ready. Mention recent repairs and whether the problem affects one fixture or room, or the whole home. You do not need to diagnose the issue yourself.
Arrange Service in Madison, WI
Call (608) 291-9165 to discuss a repair, maintenance visit, or home improvement project with Action Plumbing, Heating, AC & Electric. Explain your priorities so the team can help you plan the next step.
Need help?
608-291-9165Recent Jobs and Reviews in Madison, WI
Madison, WI at a glance
Action Plumbing, Heating, AC & Electric has completed 20 jobs in Madison, WI in October 2026.
The most recent job was on October 28, 2026.
Action Plumbing, Heating, AC & Electric has completed 602 jobs in Madison, WI in the last 12 months.
Job Locations and Reviews
Performed a prepaid furnace cleaning and safety inspection, verifying a fresh air filter was in place. Combustion analysis showed CO at 5 ppm with a 55° temperature rise across the heat exchanger, both within normal operating range, and the furnace was tuned for proper operation. Unit is running as designed; documentation of prior service is on file.
Performed seasonal heating maintenance and start-up on the boiler system. Re-secured three thermostats that had been knocked off the wall and installed new batteries in each, then attempted to fire the boiler; ambient temperatures prevented a sustained call for heat. Follow-up visit required to verify gas pressure and confirm proper operation.
Inspected furnace (approx. 12 years old) in response to water leaking from the condensate drain tube and found a loose drain plug as the source of the leak. Tightened the plug and applied silicone sealant around it to prevent further leakage. Noted rust and corrosion on the cabinet panel below the drain opening from prior water exposure.
Performed a prepaid tune-up on the gas furnace, including cleaning and inspecting the inducer motor, blower assembly, gas valve, and associated wiring and venting components. Noted rust and corrosion on the cabinet floor beneath the inducer motor, indicating possible moisture or condensate exposure that should be monitored.
Responded to a no-heat call on a non-operational furnace, performing a system inspection and diagnostics to identify the cause of the failure. Verified the exterior condenser unit was in good condition with no visible frost, rust, or damage, and restored the heating system to normal operation.
Responded to a reported clanking noise on an AprilAire Model E130 dehumidifier suspended from overhead strut channel and threaded rod. Inspected the unit, mounting hardware, condensate tubing, and condensate pump with PVC discharge line, finding no visible frost, rust, or damage to the equipment. Noted an unterminated electrical lead at the condensate pump and held off on repairs pending customer cost approval.
Performed a prepaid maintenance visit on a gas furnace with attached air handler, including a complete cleaning of the unit and a full system check of components. Inspected gas piping, electrical connections and conduit, PVC venting, and the condensate drain line, and verified the unit was clean and operating properly at completion.
Performed a tune-up on a Carrier gas furnace with a coil cabinet and Aprilaire whole-home humidifier, including inspection of the furnace cabinet, condensate and PVC venting connections, refrigerant line, wiring, and filter slot. No frost, rust, or visible damage was found, and the humidifier installation on the supply plenum, with its bypass duct connection and wiring, was verified. The system was left in good operating condition.
Performed a furnace clean and check on a Lennox gas furnace, inspecting the burner assembly, flue venting, and gas piping connections for proper operation. Verified the flue pipe and supply plenum connections were secure with no signs of rust, cracking, or frost, and noted the air filter was removed for replacement. Cleaned accumulated dust and debris from the unit and confirmed the system was operating safely.
Performed annual heating maintenance on a 15-year-old Ruud gas-fired furnace, including cleaning and a full operational inspection. Conducted a combustion analysis (O2 18.8%, CO 16 ppm, CO2 1.2%) to verify safe burner operation. Noted heavy rust and corrosion on nearby metal components and wiring in the cramped mechanical area, and found the unit in generally rough condition due to age.
Performed a furnace tune-up and inspection on an upright gas furnace, including inspection of the burner and heat exchanger assembly, gas valve, inducer motor, control board wiring, and PVC vent connections. Inspected the condensate drain system and condensate pump to verify proper drainage, and confirmed the furnace operated correctly through a heating cycle.
Performed seasonal maintenance on two gas-fired furnaces (2019 Lennox and 21-year-old Armstrong), including cleaning and a full operational inspection, and replaced the air filter as requested. Verified combustion performance with a calibrated combustion analyzer, recording CO at 19-20 ppm, CO2 at 7.4%, and O2 at 7.9%, all within acceptable operating range. Both units were left in good working condition.
Performed a basic cleaning and inspection on a 2006 Carrier gas furnace, removing the front access panel to inspect the inducer motor, gas valve assembly, control board, pressure switch, wiring, and PVC vent connection. Cleaned light dust and grime from the furnace cabinet and surrounding ductwork, and verified the unit was reassembled and ready for operation.
Responded to a complaint of excessive steam and uncontrolled heat output from the bedroom radiator nearest the front entrance, causing moisture on the floor. Inspected the radiator steam valve and found the valve, union fitting, and floor flange heavily corroded, and the radiator air vent mounted to the frame showing rust staining. Serviced the radiator valve and venting components to restore proper steam control and prevent further moisture release.
Performed a complete furnace clean and check, inspecting the burner compartment, gas valve assembly, blower motor, and control wiring for proper operation. Found a dirty return air filter and replaced it with a new filter from van stock to restore proper airflow. Equipment inspected with no visible signs of corrosion, frost, or damage.
Performed annual maintenance on a 6-year-old Lennox heating and cooling system, including cleaning and inspecting the furnace and verifying proper operation. Cleaned the exterior of the outdoor condenser unit, which had accumulated dust, leaf debris, and mulch around the base. Noted a small patch of frost-like residue at the base of the condenser and a drainage line routed near the unit, and recommend monitoring for proper drainage and airflow.
Performed a clean and check on a 2003 Bryant gas furnace, inspecting the burner assembly, heat exchanger, blower assembly, and gas connections for proper operation and safe combustion. Verified the Honeywell programmable thermostat calls for heat and cycles the furnace correctly, and confirmed the gas line, regulator, and shutoff valve are intact with no leaks observed.
Responded to a reported gas odor at the furnace and performed a safety inspection with the upper access panel removed, checking the burner assembly, gas supply piping and connections, pressure switch, wiring, and venting for leaks and abnormal conditions. Leak-tested the gas supply and fittings with a cleaning/leak-detection solution and examined the blower compartment, noting staining near the bottom of the cabinet.
Performed a tune-up on the Magicpak furnace/air handler unit, including cleaning and inspecting components, checking gas piping and connections, and verifying proper operation. Replaced the air filter and cleaned the exterior intake/exhaust grille. No rust, frost, or significant damage was observed.
Performed cleaning and safety inspection on two gas furnaces, one on the first floor and one on the second floor, verifying proper operation of each unit. Measured manifold gas pressure on the upstairs furnace, found it slightly elevated, and adjusted it to specification. Completed cleaning and operational checks on both systems.
