Need plumbing, heating, cooling, or electrical help in Madison? Call Action at (608) 291-9165 to arrange service. Describe what has stopped working, where you see the problem, and whether you need an urgent repair or are planning an upgrade.
A century-old home near the Madison isthmus can have very different plumbing, heating, cooling, and electrical needs than a newer property on the far west side. Older homes around Williamson Street, Tenney-Lapham, Marquette, and Vilas may still rely on boilers, aging piping, older panels, or retrofitted cooling systems, while newer homes are more likely to need support for Heat pumps, EV chargers, and higher electrical loads. Action Plumbing, Heating, AC & Electric has served the Madison area since 1989 and maintains a local presence on South Midvale Boulevard.
Our technicians provide heating, air conditioning, plumbing, and electrical services throughout Madison, including ZIP codes 53703, 53704, 53705, 53711, 53713, 53714, 53715, 53716, 53717, 53718, and 53719. Whether you have an unexpected breakdown or are planning an upgrade, call Action at (608) 291-9165 or contact us online to schedule service in Madison, WI.
Find the Right Service for Your Home
A repair, a planned replacement, and routine maintenance call for different conversations. These starting points can help you find the service that fits what is happening at your property.
- No heat or unreliable comfort: Start with heating repair. For seasonal upkeep, explore heating maintenance.
- Warm rooms in summer: Explore AC repair or ductless options for spaces without existing ductwork.
- Leaks, drains, or hot-water trouble: Find leak repair, sewer and drain services, and water heater services.
- Planning an electrical upgrade: Review panel changes, EV charging, and backup generators.
Need help?
608-291-9165Local Home Services for Madison Properties
Madison’s housing stock changes considerably from one side of the city to another. Pre-1940 homes are concentrated around the isthmus and older central neighborhoods, while areas farther from downtown contain large numbers of homes built from the 1950s through the 1970s. Continued expansion toward Madison’s outer edges has also introduced newer construction with different HVAC, plumbing, and electrical demands.
That variety matters when diagnosing problems or planning upgrades. An older property near Atwood Avenue may have gone through several rounds of plumbing or electrical modifications, while a west-side home may be approaching replacement age for its furnace, central air conditioner, or panel. Action’s local Madison presence gives homeowners access to a team familiar with systems found throughout the city and surrounding Dane County communities.
Air Conditioning Services in Madison, WI
Madison summers can bring hot, humid stretches that place heavy demands on cooling equipment. Older homes around the isthmus, Marquette, Tenney-Lapham, and Vilas can be especially challenging because many were built before modern duct systems and whole-home cooling became standard. Action services traditional central air systems, Ductless mini-splits, and heat pumps for homes across the city.
Our Madison cooling services include:
- 24/7 emergency AC repair during Madison heat waves
- Air conditioning installation for older and newer homes
- Air conditioning repair
- Preventive AC maintenance before July and August heat
- Central air conditioning
- Ductless mini-splits for older Madison properties
- Heat pumps for efficient year-round comfort
- Indoor air quality services
- Commercial air conditioning throughout Madison
Heating Services in Madison, WI
Madison heating systems have to perform through long winters, repeated freezes, and cold snaps that can send temperatures well below freezing. Furnaces are common throughout the city, but boilers remain part of the housing landscape in older neighborhoods near Williamson Street, Marquette, Tenney-Lapham, and the isthmus. Heat pumps are also becoming a stronger option for homeowners interested in efficiency and electrification.
Action provides:
- Emergency heating repair during Wisconsin cold snaps
- Heating installation for Madison homes
- Heating maintenance before winter arrives
- Heating repair
- Furnace repair and replacement
- Boiler service for older Madison properties
- Heat pump installation and replacement
- Heat pump repair
- Heat pump maintenance
- Indoor air quality services for dry winter conditions
Plumbing Services in Madison, WI
Madison’s plumbing needs are shaped by housing age, groundwater conditions, and naturally hard municipal water. Homes near downtown, UW-Madison, and the near east side may contain piping that has been repaired, replaced, or modified several times, while mid-century homes throughout the city are also reaching an age where original pipes, drains, fixtures, and water heaters may need attention. Mineral-heavy water can also contribute to scale inside water heaters, fixtures, and water-using appliances.
Our plumbing services include:
- Emergency plumbing throughout Madison
- Plumbing repair for older and newer homes
- Leak detection for aging Madison plumbing systems
- Kitchen plumbing
- Bathroom plumbing
- Faucets and fixtures
- Commercial plumbing
- Gas lines
- Sewer and drain services
- Water heater repair and replacement
- Water softeners for Madison’s hard water
- Water filtration
- Piping and repiping for older homes
- Pipe replacement and repair
- Well systems in surrounding Dane County areas
Properties near Lake Mendota, Lake Monona, and the Yahara River corridor can also face drainage concerns during spring thaw and periods of heavy rainfall. Saturated soil and higher groundwater levels can place more pressure on basement drainage and sump systems, while aging plumbing can be more vulnerable to leaks or failures. Professional leak detection, drain service, pipe repair, and water treatment can help address those issues before they become larger problems.
Need help?
608-291-9165Electrical Services in Madison, WI
Madison homes are being asked to support more electrical demand than ever before. Older properties were never designed for today’s combination of central air conditioning, EV chargers, heat pumps, home offices, large appliances, and connected electronics. In established neighborhoods, that can make electrical capacity just as important as the condition of the equipment being installed.
Action’s electrical services include:
- Generators for Madison power outages
- EV charger installation for home charging
- Whole-home surge protection for storm season
- Electrical service upgrades for older homes
- Meter base and panel changes
- Interior and exterior lighting
- Dedicated circuits and outlets for modern equipment
- Equipment hookup and repair
- Commercial electrical services throughout Madison
For help planning an electrical upgrade, HVAC replacement, or another project that involves multiple systems, call (608) 291-9165 or contact Action online.
Why Madison Homeowners Choose Action
Action has served Madison and the surrounding area since 1989. That experience spans decades of neighborhood growth, changing building systems, and new home technology. The company also maintains a local Madison presence on South Midvale Boulevard.
Homeowners can turn to Action for:
- 24/7 emergency service
- Plumbing, HVAC, and electrical expertise
- Licensed and insured technicians
- Upfront pricing
- Water heater installation; ask about availability and offer conditions
- A 100% customer satisfaction guarantee
- Local service backed by decades of experience
Our goal is to identify the problem clearly, explain the available options, and provide a solution that makes sense for the home. That approach is especially important in Madison, where a house near Capitol Square can have very different systems and service needs than a newer property several miles west or east.
Schedule Plumbing, HVAC or Electrical Service in Madison, WI
A Madison home near Lake Monona may need help with drainage or aging plumbing, while an older property near the isthmus may be dealing with boiler heat, dated electrical infrastructure, or cooling challenges. Homes farther west and east may be approaching furnace or AC replacement or preparing for newer upgrades such as heat pumps and EV chargers.
Action Plumbing, Heating, AC & Electric has served the Madison area since 1989 and provides plumbing, heating, air conditioning, and electrical services throughout the city. Whether you need maintenance, repairs, replacement equipment, or emergency help, call (608) 291-9165 or contact Action online today to schedule service in Madison, WI.
Repair or Replacement: Make a Plan for Your Madison Home
A recurring breakdown, uneven comfort, a leak, or a tripping circuit deserves a diagnosis before you commit to new equipment. Explain when the problem started, what has changed, and any previous repairs. The age of the equipment is useful context, but its condition and the cause of the problem matter too.
For a replacement or larger upgrade, ask how the proposed work fits the rest of your home. Heating and cooling equipment can depend on airflow and electrical capacity; water heaters depend on the available space, connections, and demand. Compare the recommended scope, expected maintenance, and available alternatives so you can make an informed decision.
Questions About Home Services in Madison, WI
Can a Madison home with boiler heat add air conditioning?
Yes, a home without existing cooling ducts may be a candidate for ductless cooling. The right choice depends on room layout, insulation, available electrical capacity, and the equipment already in place. An assessment can compare options without assuming the boiler must be removed.
Does Action offer emergency service?
Action advertises 24/7 emergency service. Call (608) 291-9165, explain the issue, and confirm the availability and next steps for your address. Emergency service availability does not guarantee a specific arrival time.
What information should I have ready when I call?
Have your service address, the symptoms, and any accessible equipment details ready. Mention recent repairs and whether the problem affects one fixture or room, or the whole home. You do not need to diagnose the issue yourself.
Arrange Service in Madison, WI
Call (608) 291-9165 to discuss a repair, maintenance visit, or home improvement project with Action Plumbing, Heating, AC & Electric. Explain your priorities so the team can help you plan the next step.
Need help?
608-291-9165Recent Jobs and Reviews in Madison, WI
Madison, WI at a glance
Action Plumbing, Heating, AC & Electric has completed 20 jobs in Madison, WI in October 2026.
The most recent job was on October 22, 2026.
Action Plumbing, Heating, AC & Electric has completed 602 jobs in Madison, WI in the last 12 months.
Job Locations and Reviews
Replaced the galvanized metal furnace exhaust flue pipe, including the elbow and the connection into the masonry chimney chase. Installed new vent piping with secure, sealed joints and verified proper fit and routing from the furnace to the chimney entry, restoring a safe venting path for combustion gases.
Performed a clean and check on the gas-fired boiler, including inspection of the burner assembly and combustion compartment, flue piping, and barometric damper. Checked the circulator pumps, associated piping and electrical connections, and verified the temperature and pressure gauge operation. Noted surface corrosion on the piping fittings at the boiler's outlet for future monitoring.
Performed annual preventive maintenance on a Lennox gas furnace, including cleaning the unit and inspecting the control board and low-voltage terminal connections, with all components found in good condition and no signs of rust, frost, or damage. The furnace was verified to be operating properly and the system was left in service.
Performed a boiler tune-up and safety inspection on a gas-fired boiler. Found the pigtails plugged and the unit visibly dirty. Cleaned the pigtail, low-water cutoff float switch, burners, and pilot assembly to restore proper operation and ensure safe, reliable performance.
Performed a tune-up and safety inspection on a steam boiler. Found the pressure control pigtail heavily fouled and plugged, preventing the pressuretrol from operating. Cleared and cleaned the pigtail, then blew down approximately 15 gallons of water to flush the system, and verified the boiler fired back up and operated properly.
Performed a complete heating system tune-up on an 11-year-old Carrier upright furnace, inspecting the cabinet, flue venting, and supply ductwork for proper connections and condition. Noted surface corrosion and weathering on sections of the galvanized round ductwork and flue, which should be monitored for future sealing or replacement. The furnace was operated through a heating cycle to verify proper function, and the unit is in operational condition following the maintenance.
Performed a complete cleaning and multi-point inspection of the Bryant gas furnace, including cleaning the unit and verifying proper operation of its components. The furnace, PVC venting, and associated ductwork and electrical connections were checked and found in good condition, with no rust, frost, or visible damage observed.
Performed a furnace clean and check, inspecting the unit's condensate drain system, including the condensate pump, PVC drain lines, and associated wiring connections, and verifying proper operation. Replaced the furnace air filter with a new AprilAire MERV 10 filter to improve filtration and airflow.
Performed a complete tune-up on a 9-year-old gas furnace, including cleaning and inspection of components and verification of proper operation. Used a combustion analyzer to test combustion performance and confirmed the unit was operating within normal parameters. Inspected the venting, condensate drain, and ductwork for leaks or damage, found no issues, and updated the maintenance notice on the plenum.
Performed a prepaid maintenance visit on an upright Goodman gas furnace, including cleaning the unit and completing a full operational check of the system. Inspected the PVC vent and condensate piping, access panels, and surrounding utility closet area, and found no frost, rust, or visible damage. Furnace was left clean and operating properly.
Responded to a no-heat call on a 2005 Goodman gas furnace with a reported intermittent gas valve issue. Inspected the unit, including the gas supply, venting, and condensate lines, and tested the gas valve and ignition sequence for proper operation. No visible frost, rust, or physical damage was observed on the unit or surrounding components.
Inspected the boiler and found it in severely deteriorated condition, with extensive corrosion on the heat exchanger sections and internal components, as well as heavy soot buildup. Prior temporary repairs were evident, with uneven sealant applied across seams and joints that has failed to provide a reliable fix. Due to the advanced corrosion and compromised integrity, the unit was determined unsafe for continued operation, and full boiler replacement is recommended.
Performed a complete furnace clean and check on a Goodman vertical gas furnace, cleaning the unit and inspecting its components for proper operation. Verified the gas supply line and shutoff valve, PVC venting, and surrounding ductwork were secure and in good condition, with no signs of rust or damage. The system was left clean and operating properly.
Performed annual tune-up on a gas-fired furnace, including cleaning and inspecting the burner assembly, wiring connections, valves, and internal components with the access panel removed. Verified proper operation of the unit and its PVC intake/exhaust venting, and inspected the connected Space-Gard air cleaner and ductwork for condition and function.
Performed a furnace tune-up, including cleaning of the unit and a full operational inspection of the heating system. Verified safe operation using a calibrated carbon monoxide analyzer and confirmed the furnace cabinet, components, and surrounding equipment were clean and free of visible damage, rust, or frost. The system was left clean and operating properly.
Diagnosed a non-operational ductless split system with a failed outdoor condenser unit; found burned conductors in the aging equipment. Repaired the damaged wiring and restored power and control connections between the indoor and outdoor units. Verified refrigerant system pressures were within normal operating range and confirmed the system is running properly. Indoor evaporator coil and housing were observed to have heavy dust, grime, and staining that should be addressed with a thorough cleaning to maintain efficiency and indoor air quality.
Performed a furnace cleaning and safety inspection on a gas furnace located in the basement mechanical area, and documented the furnace, venting, and ductwork with photos. Noted discoloration at several PVC vent/condensate joints for monitoring, and gathered equipment information for furnace and AC replacement budget estimates and a mini-split evaluation of the finished attic space.
Responded to a no-heat call on a Lennox high-efficiency furnace that would not initiate a heating cycle. Diagnostics identified a failed gas valve as the cause of the no-heat condition, and the unit was cleaned during the visit. Replacement of the gas valve or the furnace is recommended to restore safe, reliable heating operation.
Responded to a no-heat call on a gas furnace where the thermostat was set to 70°F but the space was not warming. Opened the furnace and inspected the inducer motor, pressure switch, burner assembly, gas valve, and control board, noting rust and dust buildup in the burner compartment and loose, unsecured low-voltage wiring in the control area. Performed diagnostics on the ignition sequence and wiring to restore heating operation.
Performed a furnace tune-up on a 20+ year old gas unit, including cleaning and inspecting the burner assembly, wiring, and internal components, and evaluated blower operation per the customer's request for possible replacement. Inspected the attached Aprilaire humidifier, supply line, and drain tube, and verified overall system condition with no visible rust, frost, or breakage noted.
