Need plumbing, heating, cooling, or electrical help in Madison? Call Action at (608) 291-9165 to arrange service. Describe what has stopped working, where you see the problem, and whether you need an urgent repair or are planning an upgrade.
A century-old home near the Madison isthmus can have very different plumbing, heating, cooling, and electrical needs than a newer property on the far west side. Older homes around Williamson Street, Tenney-Lapham, Marquette, and Vilas may still rely on boilers, aging piping, older panels, or retrofitted cooling systems, while newer homes are more likely to need support for Heat pumps, EV chargers, and higher electrical loads. Action Plumbing, Heating, AC & Electric has served the Madison area since 1989 and maintains a local presence on South Midvale Boulevard.
Our technicians provide heating, air conditioning, plumbing, and electrical services throughout Madison, including ZIP codes 53703, 53704, 53705, 53711, 53713, 53714, 53715, 53716, 53717, 53718, and 53719. Whether you have an unexpected breakdown or are planning an upgrade, call Action at (608) 291-9165 or contact us online to schedule service in Madison, WI.
Find the Right Service for Your Home
A repair, a planned replacement, and routine maintenance call for different conversations. These starting points can help you find the service that fits what is happening at your property.
- No heat or unreliable comfort: Start with heating repair. For seasonal upkeep, explore heating maintenance.
- Warm rooms in summer: Explore AC repair or ductless options for spaces without existing ductwork.
- Leaks, drains, or hot-water trouble: Find leak repair, sewer and drain services, and water heater services.
- Planning an electrical upgrade: Review panel changes, EV charging, and backup generators.
Need help?
608-291-9165Local Home Services for Madison Properties
Madison’s housing stock changes considerably from one side of the city to another. Pre-1940 homes are concentrated around the isthmus and older central neighborhoods, while areas farther from downtown contain large numbers of homes built from the 1950s through the 1970s. Continued expansion toward Madison’s outer edges has also introduced newer construction with different HVAC, plumbing, and electrical demands.
That variety matters when diagnosing problems or planning upgrades. An older property near Atwood Avenue may have gone through several rounds of plumbing or electrical modifications, while a west-side home may be approaching replacement age for its furnace, central air conditioner, or panel. Action’s local Madison presence gives homeowners access to a team familiar with systems found throughout the city and surrounding Dane County communities.
Air Conditioning Services in Madison, WI
Madison summers can bring hot, humid stretches that place heavy demands on cooling equipment. Older homes around the isthmus, Marquette, Tenney-Lapham, and Vilas can be especially challenging because many were built before modern duct systems and whole-home cooling became standard. Action services traditional central air systems, Ductless mini-splits, and heat pumps for homes across the city.
Our Madison cooling services include:
- 24/7 emergency AC repair during Madison heat waves
- Air conditioning installation for older and newer homes
- Air conditioning repair
- Preventive AC maintenance before July and August heat
- Central air conditioning
- Ductless mini-splits for older Madison properties
- Heat pumps for efficient year-round comfort
- Indoor air quality services
- Commercial air conditioning throughout Madison
Heating Services in Madison, WI
Madison heating systems have to perform through long winters, repeated freezes, and cold snaps that can send temperatures well below freezing. Furnaces are common throughout the city, but boilers remain part of the housing landscape in older neighborhoods near Williamson Street, Marquette, Tenney-Lapham, and the isthmus. Heat pumps are also becoming a stronger option for homeowners interested in efficiency and electrification.
Action provides:
- Emergency heating repair during Wisconsin cold snaps
- Heating installation for Madison homes
- Heating maintenance before winter arrives
- Heating repair
- Furnace repair and replacement
- Boiler service for older Madison properties
- Heat pump installation and replacement
- Heat pump repair
- Heat pump maintenance
- Indoor air quality services for dry winter conditions
Plumbing Services in Madison, WI
Madison’s plumbing needs are shaped by housing age, groundwater conditions, and naturally hard municipal water. Homes near downtown, UW-Madison, and the near east side may contain piping that has been repaired, replaced, or modified several times, while mid-century homes throughout the city are also reaching an age where original pipes, drains, fixtures, and water heaters may need attention. Mineral-heavy water can also contribute to scale inside water heaters, fixtures, and water-using appliances.
Our plumbing services include:
- Emergency plumbing throughout Madison
- Plumbing repair for older and newer homes
- Leak detection for aging Madison plumbing systems
- Kitchen plumbing
- Bathroom plumbing
- Faucets and fixtures
- Commercial plumbing
- Gas lines
- Sewer and drain services
- Water heater repair and replacement
- Water softeners for Madison’s hard water
- Water filtration
- Piping and repiping for older homes
- Pipe replacement and repair
- Well systems in surrounding Dane County areas
Properties near Lake Mendota, Lake Monona, and the Yahara River corridor can also face drainage concerns during spring thaw and periods of heavy rainfall. Saturated soil and higher groundwater levels can place more pressure on basement drainage and sump systems, while aging plumbing can be more vulnerable to leaks or failures. Professional leak detection, drain service, pipe repair, and water treatment can help address those issues before they become larger problems.
Need help?
608-291-9165Electrical Services in Madison, WI
Madison homes are being asked to support more electrical demand than ever before. Older properties were never designed for today’s combination of central air conditioning, EV chargers, heat pumps, home offices, large appliances, and connected electronics. In established neighborhoods, that can make electrical capacity just as important as the condition of the equipment being installed.
Action’s electrical services include:
- Generators for Madison power outages
- EV charger installation for home charging
- Whole-home surge protection for storm season
- Electrical service upgrades for older homes
- Meter base and panel changes
- Interior and exterior lighting
- Dedicated circuits and outlets for modern equipment
- Equipment hookup and repair
- Commercial electrical services throughout Madison
For help planning an electrical upgrade, HVAC replacement, or another project that involves multiple systems, call (608) 291-9165 or contact Action online.
Why Madison Homeowners Choose Action
Action has served Madison and the surrounding area since 1989. That experience spans decades of neighborhood growth, changing building systems, and new home technology. The company also maintains a local Madison presence on South Midvale Boulevard.
Homeowners can turn to Action for:
- 24/7 emergency service
- Plumbing, HVAC, and electrical expertise
- Licensed and insured technicians
- Upfront pricing
- Water heater installation; ask about availability and offer conditions
- A 100% customer satisfaction guarantee
- Local service backed by decades of experience
Our goal is to identify the problem clearly, explain the available options, and provide a solution that makes sense for the home. That approach is especially important in Madison, where a house near Capitol Square can have very different systems and service needs than a newer property several miles west or east.
Schedule Plumbing, HVAC or Electrical Service in Madison, WI
A Madison home near Lake Monona may need help with drainage or aging plumbing, while an older property near the isthmus may be dealing with boiler heat, dated electrical infrastructure, or cooling challenges. Homes farther west and east may be approaching furnace or AC replacement or preparing for newer upgrades such as heat pumps and EV chargers.
Action Plumbing, Heating, AC & Electric has served the Madison area since 1989 and provides plumbing, heating, air conditioning, and electrical services throughout the city. Whether you need maintenance, repairs, replacement equipment, or emergency help, call (608) 291-9165 or contact Action online today to schedule service in Madison, WI.
Repair or Replacement: Make a Plan for Your Madison Home
A recurring breakdown, uneven comfort, a leak, or a tripping circuit deserves a diagnosis before you commit to new equipment. Explain when the problem started, what has changed, and any previous repairs. The age of the equipment is useful context, but its condition and the cause of the problem matter too.
For a replacement or larger upgrade, ask how the proposed work fits the rest of your home. Heating and cooling equipment can depend on airflow and electrical capacity; water heaters depend on the available space, connections, and demand. Compare the recommended scope, expected maintenance, and available alternatives so you can make an informed decision.
Questions About Home Services in Madison, WI
Can a Madison home with boiler heat add air conditioning?
Yes, a home without existing cooling ducts may be a candidate for ductless cooling. The right choice depends on room layout, insulation, available electrical capacity, and the equipment already in place. An assessment can compare options without assuming the boiler must be removed.
Does Action offer emergency service?
Action advertises 24/7 emergency service. Call (608) 291-9165, explain the issue, and confirm the availability and next steps for your address. Emergency service availability does not guarantee a specific arrival time.
What information should I have ready when I call?
Have your service address, the symptoms, and any accessible equipment details ready. Mention recent repairs and whether the problem affects one fixture or room, or the whole home. You do not need to diagnose the issue yourself.
Arrange Service in Madison, WI
Call (608) 291-9165 to discuss a repair, maintenance visit, or home improvement project with Action Plumbing, Heating, AC & Electric. Explain your priorities so the team can help you plan the next step.
Need help?
608-291-9165Recent Jobs and Reviews in Madison, WI
Madison, WI at a glance
Action Plumbing, Heating, AC & Electric has completed 20 jobs in Madison, WI in October 2026.
The most recent job was on October 8, 2026.
Action Plumbing, Heating, AC & Electric has completed 604 jobs in Madison, WI in the last 12 months.
Job Locations and Reviews
Completed prepaid furnace maintenance on 2004 Goodman gas-fired heating unit. Performed standard cleaning and operational check, verifying all components functioning properly. Unit inspected, cleaned, and left in good working condition.
Responded to service call for Lennox furnace inspection due to visible rust formation on vent pipe surface. Upon arrival, identified corrosion developing on top of exhaust vent piping and found Fernco bands in loose condition, which can compromise venting integrity. Replaced loose Fernco bands with secure Titan bands to ensure proper vent pipe connection and prevent potential exhaust gas leakage. Performed complete system inspection including visual examination of heat exchanger, burner assembly, ignition components, and all accessible furnace components to assess warranty-covered parts condition. Verified proper furnace operation through startup cycle, confirmed adequate gas pressure, checked flame characteristics, and validated proper venting and combustion air supply. All operational parameters found within manufacturer specifications with no active leaks, abnormal noises, or heating deficiencies detected. Unit is under original 5-year parts warranty coverage and remains fully opera
Responded to service call for A/C unit making excessive noise and short cycling. Upon inspection, found outdoor condensing unit with visible signs of age and wear, including dirt accumulation and corrosion in lower compartment. Accessed interior panel to diagnose issue. Examined capacitor, wiring connections, and electrical components. Multiple wire connections showed signs of looseness and deterioration at base of unit with rust stains present. Evaluated system using R-410A refrigerant charging chart specifications for proper subcooling levels and suction pressures. Identified failing capacitor and compromised wiring as primary causes of short cycling and noise complaints. Secured loose electrical connections, replaced defective capacitor, and cleaned interior compartment of debris and corrosion. Cycled unit through multiple operations to verify elimination of noise and proper run cycle restoration. System returned to normal operation with appropriate pressures and temperatures per ma
Responded to service call for thermostat issue. Inspected Lennox digital thermostat system controlling multiple zones including sun room and family room. Verified thermostat display functionality, temperature readings, and heating mode operation on both units. System found operating properly with accurate temperature control and zone management functioning as designed.
Responded to no heat call for wall-mounted Modine unit heater in shop. Upon arrival, found gas supply to building secured with lock on gas meter, preventing fuel delivery to unit. Documented meter condition and lock placement with photos. Advised customer that gas service must be restored by utility provider before unit can be serviced or operational testing performed.
Completed comprehensive tune-up and cleaning on both furnace and air conditioning systems, with both units found to be operating within normal parameters. Replaced humidifier filter and performed standard maintenance checks on all equipment. Provided thermostat programming assistance for the PROSTAT digital unit to ensure proper system operation and customer comfort.
Responded to no heat call on 2020 Magic Pack system approximately 6 years old. Customer reported furnace runs when turned on but no air blowing through apartment. Diagnosed failed blower motor preventing air circulation through system. Replaced defective blower motor and tested system operation to confirm proper airflow restored throughout unit.
Completed comprehensive furnace tune-up including cleaning flame sensor, blowing out condensate drain trap, and performing safety diagnostics. Unit tested and confirmed operating properly with appropriate heating output and carbon monoxide levels measuring approximately 20 parts per million, which is within safe operating parameters.
Replaced failed direct spark ignitor and installed four 16x16x2 MERV 5 Glassfloss air filters on RTU. Performed airflow balancing and adjusted dampers to optimize system performance, addressing issues from previous work including improperly oriented air scoops on ductwork takeoffs that were restricting proper air distribution throughout the system.
Responded to service call for boiler with extinguished pilot light. Successfully relit pilot on 40-year-old boiler unit after addressing issue with thermocouple switch. System restored to normal operation and verified proper flame ignition and burner function.
Performed comprehensive clean and check maintenance on 2018 residential furnace system. Completed full inspection of internal components including blower motor, gas valve assembly, electrical connections, and control mechanisms. Provided additional assistance with thermostat battery replacement by removing secured wall panel that customer was unable to access. All components found operating within normal parameters, unit returned to service.
Performed comprehensive furnace clean and check maintenance service on residential heating system. Conducted standard operational testing using digital manometer to verify proper system pressures, reading 350 on diagnostic instrument. Inspected all components including heat exchanger, blower assembly, gas valve, and burner operation to ensure safe and efficient performance for the heating season.
Rerouted boiler supply and return lines that were previously running above electrical boxes, creating a code violation and safety hazard. Reran copper waterlines along alternate path to maintain proper clearance from all electrical components and junction boxes. Secured new piping runs with appropriate hangers and supports to ensure long-term stability and compliance with mechanical code requirements.
Completed annual heating maintenance on 17-year-old Ruud furnace system. Performed comprehensive inspection of all components, verified proper operation of heat exchanger, burners, and ignition system, and measured temperature differentials across the system with supply air at 73.3°F and return air at 65.5°F. Inspected condensate drainage system and associated plumbing connections, confirmed all safety controls functioning properly, and system operating within manufacturer specifications.
Completed prepaid membership maintenance visit for furnace system. Performed comprehensive clean and check procedure on Coleman furnace unit, verified all components operating to factory specifications, inspected ductwork connections, and confirmed proper venting through white PVC piping system.
Completed comprehensive boiler tune-up and cleaning on residential heating unit. Removed burners and thoroughly vacuumed burner box, which contained significant rust accumulation from extended periods without maintenance. Cleaned igniter, drained sediment from waterlines, and tested system pressure. Removed and cleaned limit switches before reinstallation. Verified fill valve operation and confirmed unit maintains proper water level on low-water conditions. Inspected burners for structural integrity—no holes or cracks detected despite rust buildup. Unit tested and confirmed operating correctly with proper heating output.
Responded to no-heat call on water source heat pump system following previous technician's diagnosis of suspected control board failure. Inspected electrical connections at terminal block and transformer assembly, verifying wire terminations at numbered terminals and thermostat base plate. Documented wiring configuration including R, W, Y, G, and AUX terminals on UWP16 control, with all low-voltage connections intact at both unit and wall-mounted thermostat locations.
Responded to complaint of excessive noise from unit 202 air handler described as sounding like an airplane. Accessed attic-mounted air handler and diagnosed blower motor operating at incorrect CFM setting. Adjusted blower speed configuration from excessively high setting to manufacturer-specified parameters appropriate for the system. Verified proper airflow and quiet operation after adjustment. Checked system pressures and temperatures at outdoor condensing unit to confirm normal operating conditions following blower speed correction.
Performed maintenance and cleaning on boiler system with reported valve closure issue on living room heater zone. Cleaned burners and flame sensor, drained and refilled system to proper level, and inspected high limit controls for debris accumulation. Unable to complete full system testing due to inaccessible thermostat secured in lockbox; performed all accessible maintenance procedures and verified proper operation of burner assembly and safety controls.
Responded to service call for leaking Aprilaire humidifier unit. Inspected humidifier system and identified water panel requiring replacement due to mineral buildup and deterioration. Replaced water panel with new OEM component and verified proper water flow and drainage. Tested unit operation to confirm leak was resolved and humidifier functioning correctly with no further water seepage detected.
