Need plumbing, heating, cooling, or electrical help in Madison? Call Action at (608) 291-9165 to arrange service. Describe what has stopped working, where you see the problem, and whether you need an urgent repair or are planning an upgrade.
A century-old home near the Madison isthmus can have very different plumbing, heating, cooling, and electrical needs than a newer property on the far west side. Older homes around Williamson Street, Tenney-Lapham, Marquette, and Vilas may still rely on boilers, aging piping, older panels, or retrofitted cooling systems, while newer homes are more likely to need support for Heat pumps, EV chargers, and higher electrical loads. Action Plumbing, Heating, AC & Electric has served the Madison area since 1989 and maintains a local presence on South Midvale Boulevard.
Our technicians provide heating, air conditioning, plumbing, and electrical services throughout Madison, including ZIP codes 53703, 53704, 53705, 53711, 53713, 53714, 53715, 53716, 53717, 53718, and 53719. Whether you have an unexpected breakdown or are planning an upgrade, call Action at (608) 291-9165 or contact us online to schedule service in Madison, WI.
Find the Right Service for Your Home
A repair, a planned replacement, and routine maintenance call for different conversations. These starting points can help you find the service that fits what is happening at your property.
- No heat or unreliable comfort: Start with heating repair. For seasonal upkeep, explore heating maintenance.
- Warm rooms in summer: Explore AC repair or ductless options for spaces without existing ductwork.
- Leaks, drains, or hot-water trouble: Find leak repair, sewer and drain services, and water heater services.
- Planning an electrical upgrade: Review panel changes, EV charging, and backup generators.
Need help?
608-291-9165Local Home Services for Madison Properties
Madison’s housing stock changes considerably from one side of the city to another. Pre-1940 homes are concentrated around the isthmus and older central neighborhoods, while areas farther from downtown contain large numbers of homes built from the 1950s through the 1970s. Continued expansion toward Madison’s outer edges has also introduced newer construction with different HVAC, plumbing, and electrical demands.
That variety matters when diagnosing problems or planning upgrades. An older property near Atwood Avenue may have gone through several rounds of plumbing or electrical modifications, while a west-side home may be approaching replacement age for its furnace, central air conditioner, or panel. Action’s local Madison presence gives homeowners access to a team familiar with systems found throughout the city and surrounding Dane County communities.
Air Conditioning Services in Madison, WI
Madison summers can bring hot, humid stretches that place heavy demands on cooling equipment. Older homes around the isthmus, Marquette, Tenney-Lapham, and Vilas can be especially challenging because many were built before modern duct systems and whole-home cooling became standard. Action services traditional central air systems, Ductless mini-splits, and heat pumps for homes across the city.
Our Madison cooling services include:
- 24/7 emergency AC repair during Madison heat waves
- Air conditioning installation for older and newer homes
- Air conditioning repair
- Preventive AC maintenance before July and August heat
- Central air conditioning
- Ductless mini-splits for older Madison properties
- Heat pumps for efficient year-round comfort
- Indoor air quality services
- Commercial air conditioning throughout Madison
Heating Services in Madison, WI
Madison heating systems have to perform through long winters, repeated freezes, and cold snaps that can send temperatures well below freezing. Furnaces are common throughout the city, but boilers remain part of the housing landscape in older neighborhoods near Williamson Street, Marquette, Tenney-Lapham, and the isthmus. Heat pumps are also becoming a stronger option for homeowners interested in efficiency and electrification.
Action provides:
- Emergency heating repair during Wisconsin cold snaps
- Heating installation for Madison homes
- Heating maintenance before winter arrives
- Heating repair
- Furnace repair and replacement
- Boiler service for older Madison properties
- Heat pump installation and replacement
- Heat pump repair
- Heat pump maintenance
- Indoor air quality services for dry winter conditions
Plumbing Services in Madison, WI
Madison’s plumbing needs are shaped by housing age, groundwater conditions, and naturally hard municipal water. Homes near downtown, UW-Madison, and the near east side may contain piping that has been repaired, replaced, or modified several times, while mid-century homes throughout the city are also reaching an age where original pipes, drains, fixtures, and water heaters may need attention. Mineral-heavy water can also contribute to scale inside water heaters, fixtures, and water-using appliances.
Our plumbing services include:
- Emergency plumbing throughout Madison
- Plumbing repair for older and newer homes
- Leak detection for aging Madison plumbing systems
- Kitchen plumbing
- Bathroom plumbing
- Faucets and fixtures
- Commercial plumbing
- Gas lines
- Sewer and drain services
- Water heater repair and replacement
- Water softeners for Madison’s hard water
- Water filtration
- Piping and repiping for older homes
- Pipe replacement and repair
- Well systems in surrounding Dane County areas
Properties near Lake Mendota, Lake Monona, and the Yahara River corridor can also face drainage concerns during spring thaw and periods of heavy rainfall. Saturated soil and higher groundwater levels can place more pressure on basement drainage and sump systems, while aging plumbing can be more vulnerable to leaks or failures. Professional leak detection, drain service, pipe repair, and water treatment can help address those issues before they become larger problems.
Need help?
608-291-9165Electrical Services in Madison, WI
Madison homes are being asked to support more electrical demand than ever before. Older properties were never designed for today’s combination of central air conditioning, EV chargers, heat pumps, home offices, large appliances, and connected electronics. In established neighborhoods, that can make electrical capacity just as important as the condition of the equipment being installed.
Action’s electrical services include:
- Generators for Madison power outages
- EV charger installation for home charging
- Whole-home surge protection for storm season
- Electrical service upgrades for older homes
- Meter base and panel changes
- Interior and exterior lighting
- Dedicated circuits and outlets for modern equipment
- Equipment hookup and repair
- Commercial electrical services throughout Madison
For help planning an electrical upgrade, HVAC replacement, or another project that involves multiple systems, call (608) 291-9165 or contact Action online.
Why Madison Homeowners Choose Action
Action has served Madison and the surrounding area since 1989. That experience spans decades of neighborhood growth, changing building systems, and new home technology. The company also maintains a local Madison presence on South Midvale Boulevard.
Homeowners can turn to Action for:
- 24/7 emergency service
- Plumbing, HVAC, and electrical expertise
- Licensed and insured technicians
- Upfront pricing
- Water heater installation; ask about availability and offer conditions
- A 100% customer satisfaction guarantee
- Local service backed by decades of experience
Our goal is to identify the problem clearly, explain the available options, and provide a solution that makes sense for the home. That approach is especially important in Madison, where a house near Capitol Square can have very different systems and service needs than a newer property several miles west or east.
Schedule Plumbing, HVAC or Electrical Service in Madison, WI
A Madison home near Lake Monona may need help with drainage or aging plumbing, while an older property near the isthmus may be dealing with boiler heat, dated electrical infrastructure, or cooling challenges. Homes farther west and east may be approaching furnace or AC replacement or preparing for newer upgrades such as heat pumps and EV chargers.
Action Plumbing, Heating, AC & Electric has served the Madison area since 1989 and provides plumbing, heating, air conditioning, and electrical services throughout the city. Whether you need maintenance, repairs, replacement equipment, or emergency help, call (608) 291-9165 or contact Action online today to schedule service in Madison, WI.
Repair or Replacement: Make a Plan for Your Madison Home
A recurring breakdown, uneven comfort, a leak, or a tripping circuit deserves a diagnosis before you commit to new equipment. Explain when the problem started, what has changed, and any previous repairs. The age of the equipment is useful context, but its condition and the cause of the problem matter too.
For a replacement or larger upgrade, ask how the proposed work fits the rest of your home. Heating and cooling equipment can depend on airflow and electrical capacity; water heaters depend on the available space, connections, and demand. Compare the recommended scope, expected maintenance, and available alternatives so you can make an informed decision.
Questions About Home Services in Madison, WI
Can a Madison home with boiler heat add air conditioning?
Yes, a home without existing cooling ducts may be a candidate for ductless cooling. The right choice depends on room layout, insulation, available electrical capacity, and the equipment already in place. An assessment can compare options without assuming the boiler must be removed.
Does Action offer emergency service?
Action advertises 24/7 emergency service. Call (608) 291-9165, explain the issue, and confirm the availability and next steps for your address. Emergency service availability does not guarantee a specific arrival time.
What information should I have ready when I call?
Have your service address, the symptoms, and any accessible equipment details ready. Mention recent repairs and whether the problem affects one fixture or room, or the whole home. You do not need to diagnose the issue yourself.
Arrange Service in Madison, WI
Call (608) 291-9165 to discuss a repair, maintenance visit, or home improvement project with Action Plumbing, Heating, AC & Electric. Explain your priorities so the team can help you plan the next step.
Need help?
608-291-9165Recent Jobs and Reviews in Madison, WI
Madison, WI at a glance
Action Plumbing, Heating, AC & Electric has completed 20 jobs in Madison, WI in October 2026.
The most recent job was on October 14, 2026.
Action Plumbing, Heating, AC & Electric has completed 604 jobs in Madison, WI in the last 12 months.
Job Locations and Reviews
Performed a furnace tune-up and safety inspection on a Lennox gas furnace, cleaning the flame sensor, servicing the condensate drain trap, tightening electrical connections, and blowing out the pressure switch. Testing showed the igniter reading 43 ohms and carbon monoxide output at 9 ppm, with the unit operating normally and heating adequately.
Performed a furnace tune-up on a Goodman gas furnace: cleaned and inspected the unit, cleaned the condensate drain trap, and tightened electrical connections and the flame sensor. Verified normal heating operation, measured elevated carbon monoxide (~140 ppm), and adjusted gas pressure to optimal levels; CO remained high after adjustment and requires further diagnosis.
Performed annual cleaning and safety inspection on a Lennox Elite furnace. Cleaned the flame sensor, serviced the condensate drain trap, and tightened electrical connections. Verified proper operation through a full heating cycle, with carbon monoxide readings measured at 28 ppm.
Performed annual heating maintenance on a 2021 Goodman furnace, including a basic cleaning and inspection of the unit. Conducted combustion analysis with a digital analyzer, with readings of CO at 46–48 ppm, CO2 at 8.2–8.3%, O2 at 6.6%, and stack loss at 10.8%, all within acceptable operating ranges. Furnace operating normally at completion, with no abnormal conditions observed.
Inspected the high-efficiency condensing furnace and identified water staining and standing moisture on the floor at the base of the unit, along with mineral deposits indicating a recurring condensate leak. Evaluated the condensate drain assembly, including the PVC drain piping, tee fitting, and condensate pump, and verified the drain line and fittings were intact with no visible damage or corrosion. Reviewed thermostat operation with the homeowner, demonstrating programming, mode selection, and temperature setpoint adjustments.
Completed furnace maintenance inspection including filter check and system evaluation. Addressed exterior vent issue where wire bird screen had become detached, allowing bird intrusion into the vent system. Reinstalled bird screen to secure vent opening and prevent future wildlife entry.
Performed comprehensive tune-up and safety inspection on 2004 Burnham steam boiler system. Conducted thorough cleaning of burner assembly, heat exchanger surfaces, and internal components, removing accumulated debris and ensuring optimal combustion efficiency. Inspected all mechanical components including burner motor, pump mechanism, copper piping connections, and valve operations for proper function. Verified safety controls, electrical connections, and viewing port condition, confirming all systems operating within manufacturer specifications.
Completed routine maintenance on 30-year-old Carrier furnace unit as part of prepaid recurring heating service. Performed thorough cleaning and comprehensive system check, including combustion analysis with digital analyzer showing oxygen levels at 12.7%, CO at 22°F, and CO2 at 4.8%. All readings within acceptable parameters for safe operation.
Responded to service call for A/C leaking issue on recently installed system. Upon inspection, discovered condensate drain line obstruction preventing proper drainage. Cleared plugged drain line, verified proper water flow, and tested system operation to ensure leak was resolved and unit was functioning correctly.
Responded to service call for air conditioning system not cooling properly. Upon inspection, discovered significant frost accumulation on refrigerant line indicating low refrigerant charge or restricted airflow. Performed complete system diagnostic on 6-year-old Carrier 59SC5A060S17 furnace unit. Completed thorough cleaning and operational check of both AC and furnace components, restoring system to proper working condition.
Performed comprehensive heating maintenance and cleaning on 2014 Bryant furnace system. Conducted thorough inspection of all major components including control board, wiring harnesses, blower assembly, and heat exchanger. Verified proper electrical connections across multiple control circuits with orange, blue, white, brown, and yellow thermostat wiring. Inspected ductwork connections and refrigerant lines for integrity. Cleaned accessible components and confirmed system operational readiness. All major components found to be functioning within normal parameters with no immediate repairs required.
Performed comprehensive clean and check maintenance on 2017 Goodman furnace system. Completed standard tune-up procedures including inspection of all major components, burner assembly cleaning, and verification of proper system operation. Unit operating within normal parameters upon completion.
Completed preventative maintenance on a 2013 Goodman gas furnace. Performed comprehensive cleaning and inspection of the entire heating unit, checking all components for proper operation and potential issues. No deficiencies or repairs were identified during the inspection; unit found to be in good working condition.
Completed furnace clean and check on Lennox unit. System operating properly with safe combustion levels at 4 ppm CO. Performed standard maintenance procedures including inspection of all components, burner cleaning, and safety verification.
Completed prepaid furnace maintenance visit including comprehensive cleaning and inspection. Verified all system components operating at factory specifications. Cleaned appropriate internal parts and confirmed proper operation of heating unit and associated ductwork. System functioning as designed with no issues identified.
Completed comprehensive boiler tune-up and cleaning service. System was found to be very dirty and required thorough cleaning of all components. Performed complete inspection of boiler assembly, copper piping, valves, and controls with no operational issues identified. All safety systems, sight glass, and wheel valves verified to be functioning properly. System restored to optimal operating condition.
Completed heating maintenance and inspection on furnace system. Performed comprehensive clean and check procedures, measuring combustion efficiency with Testo 310 analyzer showing oxygen levels at 7.9% and carbon monoxide at 32 ppm, indicating proper combustion. Verified system pressure differential readings at 35.1 using UEi EM152 digital manometer. Inspected external piping as requested and confirmed all connections secure with no visible issues.
Performed routine maintenance on an older water-source heat pump system, including comprehensive cleaning and operational check of all components. Unit was inspected for proper heating and cooling function, with all accessible mechanical and electrical systems verified to be operating within normal parameters.
Responded to no cooling call on aging residential air conditioning system. Upon arrival, confirmed condenser unit was non-operational with fan motor completely failed. Diagnosed faulty condenser fan motor preventing unit from running. Observed significant dirt accumulation on condenser coils and general wear consistent with system age exceeding 10 years. Discussed system replacement options with homeowner due to age of equipment and cost-effectiveness of investing in major repairs versus new installation.
Performed annual heating maintenance on 11-year-old Airtemp furnace unit (Model 92AF1UH070P19B-55) under 10-year parts warranty. Completed comprehensive clean and check procedures, verifying all components operating within factory specifications. Identified dirty air filter requiring replacement; customer confirmed they would replace filter themselves.
