Need plumbing, heating, cooling, or electrical help in Madison? Call Action at (608) 291-9165 to arrange service. Describe what has stopped working, where you see the problem, and whether you need an urgent repair or are planning an upgrade.
A century-old home near the Madison isthmus can have very different plumbing, heating, cooling, and electrical needs than a newer property on the far west side. Older homes around Williamson Street, Tenney-Lapham, Marquette, and Vilas may still rely on boilers, aging piping, older panels, or retrofitted cooling systems, while newer homes are more likely to need support for Heat pumps, EV chargers, and higher electrical loads. Action Plumbing, Heating, AC & Electric has served the Madison area since 1989 and maintains a local presence on South Midvale Boulevard.
Our technicians provide heating, air conditioning, plumbing, and electrical services throughout Madison, including ZIP codes 53703, 53704, 53705, 53711, 53713, 53714, 53715, 53716, 53717, 53718, and 53719. Whether you have an unexpected breakdown or are planning an upgrade, call Action at (608) 291-9165 or contact us online to schedule service in Madison, WI.
Find the Right Service for Your Home
A repair, a planned replacement, and routine maintenance call for different conversations. These starting points can help you find the service that fits what is happening at your property.
- No heat or unreliable comfort: Start with heating repair. For seasonal upkeep, explore heating maintenance.
- Warm rooms in summer: Explore AC repair or ductless options for spaces without existing ductwork.
- Leaks, drains, or hot-water trouble: Find leak repair, sewer and drain services, and water heater services.
- Planning an electrical upgrade: Review panel changes, EV charging, and backup generators.
Need help?
608-291-9165Local Home Services for Madison Properties
Madison’s housing stock changes considerably from one side of the city to another. Pre-1940 homes are concentrated around the isthmus and older central neighborhoods, while areas farther from downtown contain large numbers of homes built from the 1950s through the 1970s. Continued expansion toward Madison’s outer edges has also introduced newer construction with different HVAC, plumbing, and electrical demands.
That variety matters when diagnosing problems or planning upgrades. An older property near Atwood Avenue may have gone through several rounds of plumbing or electrical modifications, while a west-side home may be approaching replacement age for its furnace, central air conditioner, or panel. Action’s local Madison presence gives homeowners access to a team familiar with systems found throughout the city and surrounding Dane County communities.
Air Conditioning Services in Madison, WI
Madison summers can bring hot, humid stretches that place heavy demands on cooling equipment. Older homes around the isthmus, Marquette, Tenney-Lapham, and Vilas can be especially challenging because many were built before modern duct systems and whole-home cooling became standard. Action services traditional central air systems, Ductless mini-splits, and heat pumps for homes across the city.
Our Madison cooling services include:
- 24/7 emergency AC repair during Madison heat waves
- Air conditioning installation for older and newer homes
- Air conditioning repair
- Preventive AC maintenance before July and August heat
- Central air conditioning
- Ductless mini-splits for older Madison properties
- Heat pumps for efficient year-round comfort
- Indoor air quality services
- Commercial air conditioning throughout Madison
Heating Services in Madison, WI
Madison heating systems have to perform through long winters, repeated freezes, and cold snaps that can send temperatures well below freezing. Furnaces are common throughout the city, but boilers remain part of the housing landscape in older neighborhoods near Williamson Street, Marquette, Tenney-Lapham, and the isthmus. Heat pumps are also becoming a stronger option for homeowners interested in efficiency and electrification.
Action provides:
- Emergency heating repair during Wisconsin cold snaps
- Heating installation for Madison homes
- Heating maintenance before winter arrives
- Heating repair
- Furnace repair and replacement
- Boiler service for older Madison properties
- Heat pump installation and replacement
- Heat pump repair
- Heat pump maintenance
- Indoor air quality services for dry winter conditions
Plumbing Services in Madison, WI
Madison’s plumbing needs are shaped by housing age, groundwater conditions, and naturally hard municipal water. Homes near downtown, UW-Madison, and the near east side may contain piping that has been repaired, replaced, or modified several times, while mid-century homes throughout the city are also reaching an age where original pipes, drains, fixtures, and water heaters may need attention. Mineral-heavy water can also contribute to scale inside water heaters, fixtures, and water-using appliances.
Our plumbing services include:
- Emergency plumbing throughout Madison
- Plumbing repair for older and newer homes
- Leak detection for aging Madison plumbing systems
- Kitchen plumbing
- Bathroom plumbing
- Faucets and fixtures
- Commercial plumbing
- Gas lines
- Sewer and drain services
- Water heater repair and replacement
- Water softeners for Madison’s hard water
- Water filtration
- Piping and repiping for older homes
- Pipe replacement and repair
- Well systems in surrounding Dane County areas
Properties near Lake Mendota, Lake Monona, and the Yahara River corridor can also face drainage concerns during spring thaw and periods of heavy rainfall. Saturated soil and higher groundwater levels can place more pressure on basement drainage and sump systems, while aging plumbing can be more vulnerable to leaks or failures. Professional leak detection, drain service, pipe repair, and water treatment can help address those issues before they become larger problems.
Need help?
608-291-9165Electrical Services in Madison, WI
Madison homes are being asked to support more electrical demand than ever before. Older properties were never designed for today’s combination of central air conditioning, EV chargers, heat pumps, home offices, large appliances, and connected electronics. In established neighborhoods, that can make electrical capacity just as important as the condition of the equipment being installed.
Action’s electrical services include:
- Generators for Madison power outages
- EV charger installation for home charging
- Whole-home surge protection for storm season
- Electrical service upgrades for older homes
- Meter base and panel changes
- Interior and exterior lighting
- Dedicated circuits and outlets for modern equipment
- Equipment hookup and repair
- Commercial electrical services throughout Madison
For help planning an electrical upgrade, HVAC replacement, or another project that involves multiple systems, call (608) 291-9165 or contact Action online.
Why Madison Homeowners Choose Action
Action has served Madison and the surrounding area since 1989. That experience spans decades of neighborhood growth, changing building systems, and new home technology. The company also maintains a local Madison presence on South Midvale Boulevard.
Homeowners can turn to Action for:
- 24/7 emergency service
- Plumbing, HVAC, and electrical expertise
- Licensed and insured technicians
- Upfront pricing
- Water heater installation; ask about availability and offer conditions
- A 100% customer satisfaction guarantee
- Local service backed by decades of experience
Our goal is to identify the problem clearly, explain the available options, and provide a solution that makes sense for the home. That approach is especially important in Madison, where a house near Capitol Square can have very different systems and service needs than a newer property several miles west or east.
Schedule Plumbing, HVAC or Electrical Service in Madison, WI
A Madison home near Lake Monona may need help with drainage or aging plumbing, while an older property near the isthmus may be dealing with boiler heat, dated electrical infrastructure, or cooling challenges. Homes farther west and east may be approaching furnace or AC replacement or preparing for newer upgrades such as heat pumps and EV chargers.
Action Plumbing, Heating, AC & Electric has served the Madison area since 1989 and provides plumbing, heating, air conditioning, and electrical services throughout the city. Whether you need maintenance, repairs, replacement equipment, or emergency help, call (608) 291-9165 or contact Action online today to schedule service in Madison, WI.
Repair or Replacement: Make a Plan for Your Madison Home
A recurring breakdown, uneven comfort, a leak, or a tripping circuit deserves a diagnosis before you commit to new equipment. Explain when the problem started, what has changed, and any previous repairs. The age of the equipment is useful context, but its condition and the cause of the problem matter too.
For a replacement or larger upgrade, ask how the proposed work fits the rest of your home. Heating and cooling equipment can depend on airflow and electrical capacity; water heaters depend on the available space, connections, and demand. Compare the recommended scope, expected maintenance, and available alternatives so you can make an informed decision.
Questions About Home Services in Madison, WI
Can a Madison home with boiler heat add air conditioning?
Yes, a home without existing cooling ducts may be a candidate for ductless cooling. The right choice depends on room layout, insulation, available electrical capacity, and the equipment already in place. An assessment can compare options without assuming the boiler must be removed.
Does Action offer emergency service?
Action advertises 24/7 emergency service. Call (608) 291-9165, explain the issue, and confirm the availability and next steps for your address. Emergency service availability does not guarantee a specific arrival time.
What information should I have ready when I call?
Have your service address, the symptoms, and any accessible equipment details ready. Mention recent repairs and whether the problem affects one fixture or room, or the whole home. You do not need to diagnose the issue yourself.
Arrange Service in Madison, WI
Call (608) 291-9165 to discuss a repair, maintenance visit, or home improvement project with Action Plumbing, Heating, AC & Electric. Explain your priorities so the team can help you plan the next step.
Need help?
608-291-9165Recent Jobs and Reviews in Madison, WI
Madison, WI at a glance
Action Plumbing, Heating, AC & Electric has completed 20 jobs in Madison, WI in June 2026.
The most recent job was on June 5, 2026.
Action Plumbing, Heating, AC & Electric has completed 616 jobs in Madison, WI in the last 12 months.
Job Locations and Reviews
Completed prepaid air conditioning clean and check on Lennox outdoor unit. Found condenser coil heavily soiled with dirt and debris accumulation restricting airflow. Thoroughly cleaned condenser coil using appropriate methods to restore proper heat transfer efficiency. Inspected compressor, electrical connections, and refrigerant lines. All components operating within normal parameters following cleaning. Unit tested and confirmed proper operation upon completion.
Completed comprehensive air conditioning tune-up on residential condenser unit. Performed thorough cleaning of condenser coils and exterior housing, verified all system specifications within manufacturer parameters, and confirmed proper operation. Unit tested and left in optimal working condition with no deficiencies noted.
Responded to no cooling complaint at residential property. Upon arrival, found outdoor condenser unit with frozen evaporator coil, consistent with tenant's report of intermittent cooling failure requiring system shutdown to restore operation. Performed complete system thaw-out procedure and thorough cleaning of condenser unit to remove accumulated debris and restore proper airflow. Unit returned to normal operation with adequate cooling capacity after service completion.
Performed annual air conditioning clean and check maintenance service. Outdoor condensing unit was found to be somewhat dirty with accumulated debris and contamination. Thoroughly cleaned condenser coil and unit exterior, then completed full system operational checkout to ensure proper cooling performance.
Completed comprehensive A/C clean and check on residential outdoor condensing unit. Performed thorough inspection of all system components, cleaned condenser coils, verified electrical connections at disconnect box, and confirmed proper drainage through condensate line. All equipment operating within normal parameters with no issues identified.
Responded to service call for continuously running blower fan following new furnace installation completed the previous day. Upon inspection, diagnosed improper dip switch configuration on control board that was preventing the fan from cycling off with thermostat calls. Corrected dip switch settings to proper position per manufacturer specifications. Verified thermostat wiring connections at Honeywell digital thermostat and furnace terminal block were secure and properly landed. Cycled system through heating mode to confirm blower now operates correctly with thermostat demand and shuts off appropriately at end of call. System operating as designed with no further issues observed.
Performed comprehensive preventive maintenance cooling visit on residential air conditioning system. Condenser unit was found to be heavily soiled with debris accumulation affecting heat transfer efficiency. Conducted thorough cleaning of condenser coils, removed dirt and organic matter from exterior fins, and cleared vegetation from around unit perimeter. Performed complete system inspection including refrigerant levels, electrical connections, and operational safety checks. Unit restored to optimal operating condition with improved airflow and heat dissipation capability.
Completed prepaid cooling maintenance visit on Lennox residential air conditioning system. Performed comprehensive clean and check including condenser coil rinse, relay inspection, filter verification, and condensate drain line clearance. Measured and confirmed proper system operation with 15° temperature split across indoor coil and 10° subcooling at 80° ambient conditions, meeting manufacturer specifications.
Performed comprehensive air conditioning clean and check service. Found condenser coil heavily soiled with debris, restricting airflow and reducing system efficiency. Thoroughly cleaned condenser coil to restore proper heat transfer. Verified system pressures and temperatures using refrigerant manifold gauges, confirming proper refrigerant charge and superheat levels. Measured electrical parameters with multimeter to ensure safe operating conditions. System operating within manufacturer specifications upon completion.
Performed comprehensive air conditioning tune-up on outdoor condenser unit. Upon inspection, diagnosed low refrigerant charge and failed capacitor as primary issues affecting system performance. Replaced defective capacitor and recharged system to manufacturer specifications. Completed standard cleaning and operational check to restore proper cooling function.
Responded to service call for air conditioning unit not working correctly with loud banging noise from fan or blower motor. Upon arrival, inspected Bryant brand outdoor condenser unit and identified the source of the noise. Performed diagnostic evaluation of the blower motor assembly and fan components through the protective wire guard. Assessed mechanical and electrical connections to determine the cause of the malfunction. Used refrigerant gauges and testing equipment to verify system operation and ensure proper functionality of the unit.
Performed comprehensive furnace clean and check on Carrier residential heating unit. Discovered and replaced heavily soiled air filter that was restricting airflow. Identified surface rust present inside furnace cabinet, which was documented and noted for monitoring. Completed full system inspection and cleaning per standard maintenance protocol.
Responded to service call for dryer vent obstruction. Upon inspection, identified complete blockage caused by bird nest lodged in approximately 7-foot dryer vent line. Removed nesting material and debris, cleared full length of vent run, and restored proper airflow and ventilation to dryer exhaust system.
Responded to no cooling call on residential air conditioning system. Upon arrival, discovered blown fuse at disconnect. Further diagnosis revealed contactor had failed with internal short circuit, which was the root cause of repeated fuse failure. Replaced defective contactor with new unit and installed fresh fuse. Verified proper operation of condenser unit and confirmed system returned to normal cooling function.
Returned to service call to add refrigerant R-410A to Trane outdoor condensing unit following previous week's service. Verified system operation and confirmed air-conditioning unit running properly with adequate cooling performance.
Completed Family Rewards Cooling Visit on 2013 Lennox system, performing basic cleaning and operational check as part of prepaid maintenance plan. Inspected Rheem equipment installation, verified proper drainage through PVC condensate lines, and confirmed all HVAC components functioning within normal parameters.
Responded to no cooling complaint with malfunction alert displaying on thermostat. Diagnosed failed AC control board and inoperative condenser fan on existing system. Installed new air conditioning unit to restore cooling operation and ensure reliable system performance.
Completed preventive maintenance tune-up on residential outdoor air conditioning unit. Performed comprehensive inspection of condenser coils and fins, determining they were in acceptable condition and did not require combing. Conducted standard cleaning procedures on exterior cabinet, removed debris from around unit, and verified proper airflow through ventilation louvers. Checked electrical connections at disconnect box and confirmed secure mounting on concrete pad. Unit operating within normal parameters upon completion of service.
Replaced obsolete Robert Shaw mechanical thermostat with new Honeywell Home digital programmable thermostat on Trane HVAC system. Removed old thermostat, installed new unit, verified proper wiring connections, and tested system operation in cooling mode. System responding correctly to temperature setpoints and functioning as expected.
Performed seasonal start-up on recently installed air conditioning system. During inspection, discovered a leaking 3/4" copper street 90 fitting in basement. Unsweat the defective fitting, cleaned joint surfaces, and resoldered connection to eliminate refrigerant leak. Verified system pressures and temperatures using manifold gauges, confirmed proper refrigerant charge, and ensured all connections were secure and leak-free.
