A century-old home near the Madison isthmus can have very different plumbing, heating, cooling, and electrical needs than a newer property on the far west side. Older homes around Williamson Street, Tenney-Lapham, Marquette, and Vilas may still rely on boilers, aging piping, older panels, or retrofitted cooling systems, while newer homes are more likely to need support for heat pumps, EV chargers, and higher electrical loads. Action Plumbing, Heating, AC & Electric has served the Madison area since 1989 and maintains a local presence on South Midvale Boulevard.
Our technicians provide heating, air conditioning, plumbing, and electrical services throughout Madison, including ZIP codes 53703, 53704, 53705, 53711, 53713, 53714, 53715, 53716, 53717, 53718, and 53719. Whether you have an unexpected breakdown or are planning an upgrade, call Action at (608)-837-3638 or contact us online to schedule service in Madison, WI.
Local Home Services for Madison Properties
Madison’s housing stock changes considerably from one side of the city to another. Pre-1940 homes are concentrated around the isthmus and older central neighborhoods, while areas farther from downtown contain large numbers of homes built from the 1950s through the 1970s. Continued expansion toward Madison’s outer edges has also introduced newer construction with different HVAC, plumbing, and electrical demands.
That variety matters when diagnosing problems or planning upgrades. An older property near Atwood Avenue may have gone through several rounds of plumbing or electrical modifications, while a west-side home may be approaching replacement age for its furnace, central air conditioner, or panel. Action’s local Madison presence gives homeowners access to a team familiar with systems found throughout the city and surrounding Dane County communities.
Need help?
608-837-3638Air Conditioning Services in Madison, WI
Madison summers can bring hot, humid stretches that place heavy demands on cooling equipment. Older homes around the isthmus, Marquette, Tenney-Lapham, and Vilas can be especially challenging because many were built before modern duct systems and whole-home cooling became standard. Action services traditional central air systems, ductless mini-splits, and heat pumps for homes across the city.
Our Madison cooling services include:
- 24/7 emergency AC repair during Madison heat waves
- Air conditioning installation for older and newer homes
- Air conditioning repair
- Preventive AC maintenance before July and August heat
- Central air conditioning
- Ductless mini-splits for older Madison properties
- Heat pumps for efficient year-round comfort
- Indoor air quality services
- Commercial air conditioning throughout Madison
Heating Services in Madison, WI
Madison heating systems have to perform through long winters, repeated freezes, and cold snaps that can send temperatures well below freezing. Furnaces are common throughout the city, but boilers remain part of the housing landscape in older neighborhoods near Williamson Street, Marquette, Tenney-Lapham, and the isthmus. Heat pumps are also becoming a stronger option for homeowners interested in efficiency and electrification.
Action provides:
- Emergency heating repair during Wisconsin cold snaps
- Heating installation for Madison homes
- Heating maintenance before winter arrives
- Heating repair
- Furnace repair and replacement
- Boiler service for older Madison properties
- Gas fireplace service
- Heat pump installation and replacement
- Heat pump repair
- Heat pump maintenance
- Indoor air quality services for dry winter conditions
Plumbing Services in Madison, WI
Madison’s plumbing needs are shaped by housing age, groundwater conditions, and naturally hard municipal water. Homes near downtown, UW-Madison, and the near east side may contain piping that has been repaired, replaced, or modified several times, while mid-century homes throughout the city are also reaching an age where original pipes, drains, fixtures, and water heaters may need attention. Mineral-heavy water can also contribute to scale inside water heaters, fixtures, and water-using appliances.
Our plumbing services include:
- Emergency plumbing throughout Madison
- Plumbing repair for older and newer homes
- Leak detection for aging Madison plumbing systems
- Kitchen plumbing
- Bathroom plumbing
- Faucets and fixtures
- Commercial plumbing
- Gas lines
- Sewer and drain services
- Water heater repair and replacement
- Water softeners for Madison’s hard water
- Water filtration
- Piping and repiping for older homes
- Pipe replacement and repair
- Well systems in surrounding Dane County areas
Properties near Lake Mendota, Lake Monona, and the Yahara River corridor can also face drainage concerns during spring thaw and periods of heavy rainfall. Saturated soil and higher groundwater levels can place more pressure on basement drainage and sump systems, while aging plumbing can be more vulnerable to leaks or failures. Professional leak detection, drain service, pipe repair, and water treatment can help address those issues before they become larger problems.
Electrical Services in Madison, WI
Madison homes are being asked to support more electrical demand than ever before. Older properties were never designed for today’s combination of central air conditioning, EV chargers, heat pumps, home offices, large appliances, and connected electronics. In established neighborhoods, that can make electrical capacity just as important as the condition of the equipment being installed.
Action’s electrical services include:
- Generators for Madison power outages
- EV charger installation for home charging
- Whole-home surge protection for storm season
- Electrical service upgrades for older homes
- Meter base and panel changes
- Interior and exterior lighting
- Dedicated circuits and outlets for modern equipment
- Equipment hookup and repair
- Commercial electrical services throughout Madison
For help planning an electrical upgrade, HVAC replacement, or another project that involves multiple systems, call (608)-837-3638 or contact Action online.
Why Madison Homeowners Choose Action
Action has served Madison and the surrounding area since 1989. That experience spans decades of neighborhood growth, changing building systems, and new home technology. The company also maintains a local Madison presence on South Midvale Boulevard.
Homeowners can turn to Action for:
- 24/7 emergency service
- Plumbing, HVAC, and electrical expertise
- Licensed and insured technicians
- Upfront pricing
- Same-day water heater installation when available
- A 100% customer satisfaction guarantee
- Local service backed by decades of experience
Our goal is to identify the problem clearly, explain the available options, and provide a solution that makes sense for the home. That approach is especially important in Madison, where a house near Capitol Square can have very different systems and service needs than a newer property several miles west or east.
What Madison, WI Customers Say About Action
Jeff K.
“Ethan R and his partner installed a new hot water heater. It was done well and took approximately an hour. The area was left well cleaned. Very happy with the service.”
Massitan C.
“I will recommend Rodney’s service for his professional skills, expertise and friendliness. He was able to narrow our issue down to the exact location. His expertise and knowledge allowed us to solve an eight weeks on going issue in less than 2 hours. We paid a fraction of the projected price based on phone calls to similar businesses in our area. We were satisfied beyond our expectations.”
Abraham D.
“Riley and Stone arrived exactly at 8 AM and did a great job getting the new furnace installed. They were both professional, personable, and polite. I’m glad I called Action to get a second quote on the new furnace as it was $3K less than other competitor while still including everything that the original estimate covered. Thanks, guys!”
Schedule Plumbing, HVAC or Electrical Service in Madison, WI
A Madison home near Lake Monona may need help with drainage or aging plumbing, while an older property near the isthmus may be dealing with boiler heat, dated electrical infrastructure, or cooling challenges. Homes farther west and east may be approaching furnace or AC replacement or preparing for newer upgrades such as heat pumps and EV chargers.
Action Plumbing, Heating, AC & Electric has served the Madison area since 1989 and provides plumbing, heating, air conditioning, and electrical services throughout the city. Whether you need maintenance, repairs, replacement equipment, or emergency help, call (608)-837-3638 or contact Action online today to schedule service in Madison, WI.
Recent Jobs and Reviews in Madison, WI
Job Locations and Reviews
Responded to no heat call on Goodman direct vent forced air furnace, model GY9S00B12UP11J. Upon inspection, diagnosed insufficient vacuum at pressure switch preventing unit operation. Testing revealed inducer motor failure causing inadequate draft pressure to satisfy safety controls. Provided customer with repair options including inducer motor replacement or complete furnace replacement given unit age and condition.
Responded to warranty call for recently installed furnace experiencing severe vibration and shaking. Upon inspection, discovered air filter had collapsed with metal mesh completely missing, having been drawn into the system due to excessive negative pressure. Determined cold air return duct was undersized for the furnace specifications, creating insufficient airflow and causing the filter failure. Removed damaged filter debris from system, took measurements of existing cold air return for proper resizing and fabrication to prevent recurrence of the issue.
Responded to no heat call where thermostat was reported as not working. Upon inspection, diagnosed failed capacitor on the draft inducer motor. Removed defective inducer assembly and installed new replacement inducer motor. Verified proper operation of furnace, confirmed ignition sequence, and tested heating cycle. Unit restored to normal operation with adequate heat output.
Responded to no heat call and identified improperly wired thermostat causing system malfunction and overheating of conditioned space. Diagnosed incorrect wiring configuration on Honeywell Home thermostat connected to ComfortMaker furnace unit. Corrected thermostat wiring per manufacturer specifications and replaced blown fuse. Verified proper system operation, confirmed heating cycle functionality, and ensured thermostat communication with furnace. System restored to normal operation with accurate temperature control.
Performed seasonal air conditioning startup and system inspection. Connected manifold gauge set to outdoor condenser unit to verify refrigerant pressures and system operation. Utilized digital temperature measurement tools to check supply and return air temperatures, confirming proper cooling differential. Addressed customer inquiry regarding previously repaired heating system. Verified outdoor unit had protective winter cover in place, which was removed for seasonal startup. All system parameters checked and found operating within normal specifications.
Responded to no-heat call and diagnosed furnace displaying error code 272 indicating pressure switch failure. Verified pressure switch malfunction using digital manometer, which showed readings fluctuating between 1.35 to 51 inches of water column vacuum, outside normal operating parameters. Replaced defective Honeywell pressure switch with new unit, tested system operation, and confirmed furnace returned to normal heating cycle.
Responded to customer complaint of exhaust odor in furnace room following recent repair. Conducted thorough inspection of furnace combustion system, venting components, and draft inducer motor operation. Verified no gas leaks present and confirmed carbon monoxide detector functioning properly outside furnace room. Inspected all recent work including pressure switches, gaskets, and flue pipe connections for proper sealing. Tested draft inducer blower motor for adequate airflow and checked exhaust venting system for blockages or improper termination. Documented findings with photos of utility room equipment and plumbing installations for customer records.
Completed comprehensive furnace tune-up and inspection on Lennox heating system. Replaced furnace filter and installed model #35 filter in Aprilaire 2400 whole-house humidifier system per customer request. Performed standard maintenance procedures including system diagnostics, safety checks, and operational testing. All equipment found to be functioning within normal parameters. Customer inquired about thermostat evaluation and potential humidifier replacement for future consideration.
Replaced defective fan limit switch on residential furnace. Installed new fan control switch to restore proper blower operation and temperature regulation. System tested and confirmed operational upon completion.
Completed scheduled furnace tune-up and safety inspection with all systems found operating within normal parameters. Verified temperature differentials and electrical readings using calibrated testing equipment, confirming proper system performance and safe operation.
Responded to service call for Lennox Elite furnace making unusual noise. Upon inspection, discovered cracked venturi with potential for complete failure. Replaced damaged venturi and installed new blower motor. Measured carbon monoxide levels at exhaust registering 4 ppm and performed complete furnace tune-up to optimize system performance and safety.
Responded to no heat call with EE1 error code on fourth service visit. Upon inspection, identified failed control board component requiring replacement. Removed defective pressure switch connector and installed new replacement part, then verified proper electrical connections on Emerson control board. Advised customer that unit has not received annual maintenance since installation, which contributed to system failure, and strongly recommended scheduling yearly preventative maintenance to avoid future breakdowns.
Performed seasonal AC startup on residential condensing unit that had been dormant since installation through the winter months. Verified unit operation, checked refrigerant levels, inspected electrical connections, and confirmed proper airflow through condenser coils and fan assembly.
Responded to no-heat call on 20-year-old furnace displaying error code 21. Diagnosed failed ignition control board and ventor motor operating at reduced speed with inconsistent ramping. Presented customer with repair options including control board replacement given the age and condition of the unit.
Completed furnace tune-up on 15-year-old unit that was experiencing operational issues. Performed combustion analysis using UEi CO55 analyzer, which showed carbon monoxide reading of 1.1 ppm within acceptable range. Found severely dirty air filter with significant debris accumulation causing restricted airflow, which was likely contributing to reported performance problems. Advised homeowner to replace filters regularly to prevent future issues and maintain system efficiency.
Responded to no-heat call on Carrier furnace system. Replaced thermostat batteries, cleaned condensate trap to remove blockage, and cleaned flame sensor. Verified proper ignition sequence and confirmed unit achieved stable combustion and normal heating operation upon completion.
Responded to building overheating issue caused by malfunctioning zone valve control on baseboard heating system. Diagnosed miswired thermostat connections causing zone valve actuator to continuously rotate, preventing proper temperature regulation throughout the building. Disconnected faulty zone valve and two thermostats from the system to restore proper heating control and eliminate overheating condition.
# HVAC Service Report - Furnace Inspection Responded to service call regarding suspected heat exchanger crack and potential carbon monoxide presence in residence. Performed comprehensive furnace inspection using video scope equipment to examine heat exchanger for cracks or failures. Visual inspection revealed rust accumulation on heat exchanger components but confirmed no visible cracks or breaches present. Inspected blower cabinet and verified no water infiltration or moisture damage in compartment. Conducted carbon monoxide testing throughout living space to verify safe levels. Extended safety inspection to include water heater and kitchen range appliances to identify any potential CO sources. Verified proper combustion and venting on all fuel-burning appliances. Confirmed residence ventilation adequate with no excessive air sealing causing combustion air deficiency. Carbon monoxide readings measured at two parts per million, which falls within safe acceptable range. Documented fi
# Service Report Responded to service call for boiler not operating following installation completed previous week. Upon arrival, accessed control panel and performed comprehensive diagnostic of electrical system and safety controls. Identified wiring connection issues affecting proper system operation. Verified and corrected all wire terminations at control board, transformer, relay, and gas valve connections. Ensured proper wire routing and secure connections throughout control panel using appropriate wire nuts. Tested all safety interlocks and limit controls for proper operation. Verified gas valve functionality and control signal integrity. Cycled system through multiple heating cycles to confirm reliable ignition sequence and burner operation. All components now functioning within manufacturer specifications. System operational and customer informed of proper operation procedures.
Responded to service call regarding humidifier leak. Performed thorough cleaning of humidifier components and replaced panel. Conducted temperature differential testing with digital thermometers, confirming proper system operation with readings of 124.3°F and 123°F.
