Monona grows through remodeling, additions, and infill. In a mid-century ranch near Frost Woods or a renovated lakefront home, heating, cooling, plumbing, and electrical systems may have changed many times. Action Plumbing, Heating, A/C & Electric helps homeowners maintain those systems and plan the next improvement.
Action Plumbing, Heating, A/C & Electric provides heating, cooling, plumbing, electrical, water-care, and generator service throughout Monona and ZIP code 53716. Call (608) 291-9165 or contact Action online to schedule service.
Find the Right Service for Your Home
A repair, a planned replacement, and routine maintenance call for different conversations. These starting points can help you find the service that fits what is happening at your property.
- No heat or unreliable comfort: Start with heating repair. For seasonal upkeep, explore heating maintenance.
- Warm rooms in summer: Explore AC repair or ductless options for spaces without existing ductwork.
- Leaks, drains, or hot-water trouble: Find leak repair, sewer and drain services, and water heater services.
- Planning an electrical upgrade: Review panel changes, EV charging, and backup generators.
Need help?
608-291-9165Decades of Updates Under One Roof
Ranches, Cape Cods, and split-levels from the 1950s through the 1970s make up much of Monona’s housing. Finished basements, kitchen remodels, additions, and equipment replacements can leave one home with systems from several eras.
Frost Woods and Belle Isle are good examples of established parts of the city where the house itself may be older even though major parts of it have been updated. Along the Lake Monona shoreline, higher-end custom homes and heavily renovated waterfront properties create another set of service needs.
Plumbing That Keeps Up With Monona’s Renovated Homes
Plumbing is Action’s primary trade. We work with the piping, fixtures, and water heaters already in place and account for how past renovations changed the home’s layout.
Our plumbers handle:
Water-heater replacement is one part of that work, whether the equipment serves an established home or a property with a substantially revised plumbing layout.
Spring brings another set of concerns. Snowmelt and the high water table across Dane County can increase standing-water and basement-flooding problems, which matters in a city where finished lower levels are common remodeling projects.
Need help?
608-291-9165Keeping Monona Warm From Ranch Homes to the Lakefront
Forced-air gas furnaces are the most common residential heating system in Monona, but they are far from the only thing we see. Boilers and hydronic baseboards are still part of the mix in older homes and some lakefront properties.
Heating services include:
Additions and remodeling can change heating needs. Our technicians consider the equipment and the spaces it serves when evaluating a repair or replacement.
Dane County winters regularly bring temperatures below zero and more than 40 inches of snow in an average year. By the time the Monona Fall Festival arrives in late September or early October, we know the first hard freeze is not far away. That makes fall a good time to address furnace maintenance, boiler service, or replacement planning before winter gets serious.
Cooling Spaces the Original Ductwork Never Reached
Central AC is common in Monona, but an addition or remodeled room may not be well served by the original ductwork. We help homeowners evaluate cooling options for those spaces.
Cooling services include:
Ductless mini-splits fit particularly well into the local service mix because they are used in additions, finished basements, and boiler-heated homes. In those situations, extending or rebuilding ductwork is not always the most practical answer.
Warm, humid summers put steady demand on cooling equipment. Before the Monona Community Festival at Winnequah Park and busy days around Schluter Beach and Wyldhaven Park, spring maintenance can help identify problems ahead of peak summer use.
Electrical Upgrades for Homes That Keep Evolving
In Monona, electrical work often follows the same renovation history as the plumbing and HVAC systems. An addition may need dedicated circuits. A remodeled kitchen or basement may need updated lighting and outlets. New comfort equipment may need its own hookup or greater electrical capacity.
Electrical services include:
Panel changes and service upgrades can be part of a larger remodeling plan, especially when new equipment adds electrical demand.
Storm outages are another reason to plan ahead. Action provides generator service and installation, as well as surge protection for homes and businesses.
Commercial Systems From Monona Drive to South Towne
Monona’s commercial footprint is dense for a relatively small city. Monona Drive is the main corridor for restaurants, retail, clinics, and offices, while Broadway and the Beltline support redevelopment and a different mix of commercial properties.
A retail strip along Monona Drive may rely on rooftop units, while a newer multifamily property may use multi-split or VRF equipment. South Towne Business Park adds offices, warehouses, and light-industrial properties into the mix.
Action provides commercial HVAC, plumbing, and electrical service for:
- Retail properties
- Restaurants
- Clinics
- Offices
- Multifamily developments
- Warehouses
- Light-industrial properties
- Rooftop and RTU systems
- Multi-split and VRF systems
Service and maintenance should match the building’s equipment and daily needs.
Repair or Replacement: Make a Plan for Your Monona Home
A recurring breakdown, uneven comfort, a leak, or a tripping circuit deserves a diagnosis before you commit to new equipment. Explain when the problem started, what has changed, and any previous repairs. The age of the equipment is useful context, but its condition and the cause of the problem matter too.
For a replacement or larger upgrade, ask how the proposed work fits the rest of your home. Heating and cooling equipment can depend on airflow and electrical capacity; water heaters depend on the available space, connections, and demand. Compare the recommended scope, expected maintenance, and available alternatives so you can make an informed decision.
Questions About Home Services in Monona, WI
What should I consider when updating comfort systems in a remodeled Monona home?
An addition, finished basement, or remodeled room can change how the home uses heating, cooling, plumbing, and electricity. Ask for an assessment of the existing equipment, airflow, connections, and electrical capacity before choosing an upgrade. Ductless heating or cooling may be an option where the original ductwork does not reach.
Does Action offer emergency service?
Action advertises 24/7 emergency service. Call (608) 291-9165, explain the issue, and confirm the availability and next steps for your address. Emergency service availability does not guarantee a specific arrival time.
What information should I have ready when I call?
Have your service address, the symptoms, and any accessible equipment details ready. Mention recent repairs and whether the problem affects one fixture or room, or the whole home. You do not need to diagnose the issue yourself.
Get Your Monona Home or Business Back on Track
From established neighborhoods to lakefront properties and local businesses, Action can help you plan repairs, maintenance, and system upgrades.
Action Plumbing, Heating, A/C & Electric provides heating, cooling, plumbing, electrical, water-care, and generator service throughout Monona and 53716. Call (608) 291-9165 or contact Action online to schedule repair, maintenance, installation, or replacement service.
Need help?
608-291-9165Recent Jobs and Reviews in Monona, WI
Monona, WI at a glance
Action Plumbing, Heating, AC & Electric has completed 20 jobs in Monona, WI between February 2026 and October 2026.
The most recent job was on October 21, 2026.
Action Plumbing, Heating, AC & Electric has completed 22 jobs in Monona, WI in the last 12 months.
Job Locations and Reviews
Responded to a no-heat call on a gas-fired boiler system (installed approx. 2011) serving the whole house. Inspected the boiler, flue venting, control components, and associated hydronic piping in the mechanical room, and noted no visible leaks, frost, or ice; some copper fittings showed oxidation and the boiler base area had debris and residue. Documented system conditions with photos.
Responded to a boiler leak reported following a recent maintenance visit and traced the source to the boiler drain valve on the side of the unit. Capped the boiler drain with a drain cap to stop the leak and secure the system.
Completed prepaid furnace clean and check maintenance visit. Performed thorough cleaning of furnace components including blower assembly and internal compartments. Conducted comprehensive operational inspection verifying all systems operating within manufacturer specifications. All equipment found to be functioning properly with no deficiencies noted.
Performed comprehensive heating maintenance on residential boiler system. Disassembled and cleaned fill valve which was not functioning adequately, cleaned igniter, and vacuumed burners and burner area. Verified unit operating effectively with CO levels at 6 ppm, confirmed exhaust vent opening and closing properly on call for heat, replaced thermostat batteries, and tested system for proper heat call response.
Completed furnace clean and check maintenance service. Performed combustion analysis using Testo 310 analyzer, recording oxygen levels at 97% and carbon monoxide at 4 ppm, indicating proper combustion efficiency. Measured supply air temperature at 53.5°F and return air temperature at 75.6°F to verify system operation and airflow performance.
Responded to water leak complaint with AC unit discharging onto roof membrane. Found pressure tap (PT) traps completely plugged, preventing proper condensate drainage. Cleared and cleaned PT traps, restored drainage flow, and cycled unit to verify proper operation and confirm leak resolution.
Completed prepaid AC clean and check maintenance visit. Found dirty condenser coil which was thoroughly washed and cleaned. Inspected electrical components including contactor and capacitor—both tested within normal operating specifications. Verified fresh air filter was installed and confirmed condensate drain line was flowing freely with no blockages. Performed refrigerant charge analysis and found system slightly low on charge; however, indoor temperature split measured at 20°, indicating adequate cooling performance within acceptable range for current conditions.
Completed prepaid A/C maintenance on rooftop unit. Performed thorough cleaning and operational check of all system components. Unit operating within normal parameters with no issues identified.
Responded to no cooling condition in upstairs bedroom. Diagnosed outdoor condensing unit with failed compressor capacitor preventing compressor operation. Replaced defective capacitor with new unit, restoring proper system function and cooling performance.
Completed seasonal air conditioning clean and check on Lennox condenser unit as part of prepaid maintenance agreement. Performed thorough cleaning of outdoor unit, inspected all components, and verified system operation. All equipment found in good working condition with no issues identified.
Responded to service call for residential air conditioning system. Upon inspection, discovered unit was operating 3 pounds low on refrigerant charge. Added refrigerant to restore proper system charge levels and verified correct operating pressures. Unit tested and confirmed cooling properly after refrigerant addition.
Performed AC clean and check on 410A refrigerant system. Found dirty condenser coil which was thoroughly cleaned to restore proper heat transfer efficiency. Identified leaking Schrader valve causing refrigerant loss; tightened valve to stop leak. System was low on 410A refrigerant due to the valve leak; added refrigerant to bring system to proper operating charge per manufacturer specifications. Verified system pressures and temperatures using manifold gauges, confirming unit returned to normal operating parameters.
Completed seasonal clean and check service on rooftop-mounted air conditioning system. Performed comprehensive inspection of outdoor condensing unit and indoor air handler, verified proper operation of all components including condenser fan motor and compressor. Cleaned condenser coils, checked refrigerant pressures, inspected electrical connections, and confirmed system is operating within manufacturer specifications for the cooling season.
Performed preventative maintenance inspection and cleaning on a two-year-old residential air conditioning system in preparation for cooling season. Upon arrival, conducted thorough examination of outdoor condenser unit, which showed significant accumulation of dirt, dust, and debris throughout the condenser coils and fins despite relatively new equipment age. Removed access panels to assess internal components and coil condition. Performed complete cleaning of condenser coils to remove heavy buildup that had collected across the finned surfaces, restoring proper airflow and heat transfer efficiency. Verified all mechanical components, electrical connections, and refrigerant lines were in good working order with no deficiencies noted. Unit operational status confirmed satisfactory with no repairs required at this time.
Installed low ambient control kit on outdoor condensing unit to enable system operation during cooler outdoor temperatures. Mounted ComfortAlert circuit board inside control panel, wired control module to existing capacitor and electrical components, and secured all connections with appropriate wire nuts and cable management. System tested and verified operational with new low ambient control functioning properly.
Responded to no-cooling complaint on master bedroom A/C unit following recent clean and check service. Upon arrival, confirmed indoor fan operation but no cooling output. Inspected outdoor condenser unit and reviewed diagnostic fault code chart to identify system malfunction. Photographed diagnostic reference panel showing LED error code descriptions and documented multiple outdoor condensing units installed at property for service records.
Responded to no cooling complaint on residential air conditioning unit. Found severely clogged air filter restricting airflow and improper thermostat wiring preventing compressor operation. Cleaned condenser coil, replaced air filter, and installed jumper wire between Y1 and Y2 terminals to restore proper cooling cycle. Unit tested and operating normally upon departure.
Responded to no-heat call on Ruud Silhouette II gas furnace. Upon inspection, found failed inducer motor, cracked heat exchanger with visible corrosion and rust deterioration, and defective pressure switch. Due to safety concerns from compromised heat exchanger and extent of component failures, recommended and installed new furnace system with proper vent liner to ensure safe operation and code compliance.
Performed preventative maintenance clean and check on three A/C units per seasonal service protocol. All three units inspected, cleaned, and verified operational. Additionally inspected kitchen faucet as requested; faucet is a modern pull-down spray model with control buttons on handle, currently functional with no leaks observed in supply lines or drain assembly beneath sink, which includes garbage disposal unit with properly connected water supply lines, drain hoses, and shut-off valves.
Responded to service call for customer Jean regarding a Honeywell humidifier with missing components. Located and installed new humidifier tray that was previously absent, as the original top carrier portion was missing. Completed installation of replacement tray to restore proper humidifier functionality.
