Need plumbing, heating, cooling, or electrical help in Sun Prairie? Call Action at (608) 291-9165 to arrange service. Describe what has stopped working, where you see the problem, and whether you need an urgent repair or are planning an upgrade.
Sun Prairie has grown quickly, and its homes reflect that expansion. Newer neighborhoods around the Highway 151 and Burke Road corridors have different service needs than older properties closer to downtown Main Street, where plumbing, HVAC, and electrical systems may have been updated in stages over the years. Action Plumbing, Heating, AC & Electric has served the area since 1989 and operates a local office at 899 S. Bird St. in Sun Prairie.
Our technicians provide plumbing, heating, cooling, and electrical services throughout ZIP codes 53590 and 53596. Whether your home needs an urgent repair, seasonal maintenance, or an upgrade for newer technology, call (608) 291-9165 or contact Action online to schedule service in Sun Prairie, WI.
Find the Right Service for Your Home
A repair, a planned replacement, and routine maintenance call for different conversations. These starting points can help you find the service that fits what is happening at your property.
- No heat or unreliable comfort: Start with heating repair. For seasonal upkeep, explore heating maintenance.
- Warm rooms in summer: Explore AC repair or ductless options for spaces without existing ductwork.
- Leaks, drains, or hot-water trouble: Find leak repair, sewer and drain services, and water heater services.
- Planning an electrical upgrade: Review panel changes, EV charging, and backup generators.
Need help?
608-291-9165Local Home Services in Sun Prairie, WI
Sun Prairie has one of the newer concentrations of housing in the Action service area, with much of the city’s growth occurring from the 1990s forward. Neighborhoods have continued expanding beyond the original city core, creating strong demand for service on furnaces, air conditioners, water heaters, sump pumps, electrical systems, and other equipment that may now be entering its first major replacement cycle. Newer construction also means more homeowners are considering heat pumps, EV chargers, smart controls, Generators, and other modern upgrades.
Action’s South Bird Street office gives Sun Prairie homeowners access to a local team familiar with the community. From homes near Cannery Square and Firemen’s Angell Park to subdivisions developing toward the edges of 53596, our technicians work with the different systems found throughout the city.
Plumbing Services in Sun Prairie, WI
Sun Prairie’s plumbing needs are influenced by newer construction, Dane County’s hard water, and the area’s relatively flat terrain. Most homes within the city use municipal water, but mineral buildup can still affect fixtures, water heaters, and other water-using equipment over time. Spring snowmelt and heavy rain can also make sump pumps and reliable drainage especially important in lower areas and newer subdivisions.
Our Sun Prairie plumbing services include:
- Emergency plumbing throughout Sun Prairie
- Plumbing repair for newer and established homes
- Leak detection and repair
- Kitchen plumbing
- Bathroom plumbing
- Faucets and fixtures
- Commercial plumbing along local business corridors
- Gas line service
- Sewer and drain services
- Water heater repair and replacement
- Water softeners for Dane County hard water
- Water filtration
- Piping and repiping
- Pipe repair and replacement
- Well systems for applicable properties near outer 53596
Need help?
608-291-9165Electrical Services in Sun Prairie, WI
Electrical demand is growing along with Sun Prairie itself. Newer homes and expanding households are increasingly adding EV chargers, heat pumps, home offices, generators, smart devices, and other equipment that depends on reliable electrical capacity. Homes closer to downtown may have different needs, including panel changes, dedicated circuits, lighting improvements, surge protection, or service upgrades.
Action’s Sun Prairie electrical services include:
- EV charger installation for home charging
- Generators for Dane County storm outages
- Whole-home surge protection
- Electrical service upgrades
- Meter base and panel changes
- Interior and exterior lighting
- Dedicated circuits and outlets
- Equipment hookup and repair
- Commercial electrical service near Highway 151 and Main Street
Heating Services in Sun Prairie, WI
Sun Prairie heating systems have to handle long Wisconsin winters, freezing temperatures, and strong winds that can increase heat loss during colder stretches. Gas furnaces remain common throughout the city, while newer housing makes heat pumps and high-efficiency systems increasingly relevant for homeowners considering future upgrades. Reliable heating is especially important when temperatures stay below freezing long enough to put both comfort and plumbing at risk.
Our Sun Prairie heating services include:
- Emergency heating repair during Sun Prairie cold snaps
- Heating installation for newer and established homes
- Furnace repair and replacement
- Heating repair
- Heating maintenance before winter
- Boiler service
- Heat pump installation and replacement
- Heat pump repair
- Heat pump maintenance
- Indoor air quality services for winter comfort
Air Conditioning Services in Sun Prairie, WI
Hot and humid Wisconsin summers can push cooling equipment hard, especially during July and August. Central air conditioning is common in much of Sun Prairie’s newer housing, while older properties around the downtown core may rely on systems that were added or updated later. Homes with additions, finished garages, upper floors, or other difficult-to-cool areas may also benefit from ductless equipment.
Our Sun Prairie cooling services include:
- 24/7 emergency AC repair during summer heat
- Air conditioning repair
- AC installation for Sun Prairie homes
- Preventive AC maintenance before peak summer weather
- Central air conditioning
- Ductless mini-splits for older homes and additions
- Heat pumps for efficient heating and cooling
- Indoor air quality services
- Commercial air conditioning throughout Sun Prairie
For help with a major HVAC or electrical upgrade, call (608) 291-9165 or contact Action online.
Why Sun Prairie Homeowners Choose Action
Action has served the area since 1989 and maintains a dedicated office on South Bird Street in Sun Prairie. The company is also involved in the local business community through the Sun Prairie Chamber of Commerce and provides plumbing, heating, air conditioning, electrical, and emergency services through one local team.
Homeowners can turn to Action for:
- 24/7 emergency service
- Plumbing, heating, cooling, and electrical expertise
- Licensed and insured technicians
- Clear and upfront pricing
- Water heater installation; ask about availability and offer conditions
- A 100% customer satisfaction guarantee
- A local Sun Prairie office
Having several home-service trades under one company can also simplify larger projects. A heat pump installation may require electrical work, a remodel may involve plumbing and new circuits, and a generator installation can affect other essential systems in the home.
Schedule Plumbing, HVAC or Electrical Service in Sun Prairie, WI
Homes throughout Sun Prairie face different needs depending on their age, location, and equipment. A newer home near the Highway 151 corridor may be ready for an EV charger or heat pump, while an established property near downtown may need plumbing repairs, a furnace replacement, or an updated electrical panel. Hard water, spring drainage, summer humidity, and Wisconsin winters also create ongoing service demands throughout the year.
Action Plumbing, Heating, AC & Electric serves homes throughout 53590 and 53596 from its local South Bird Street office. Call (608) 291-9165 or contact Action online today to schedule plumbing, heating, air conditioning, or electrical service in Sun Prairie, WI.
Repair or Replacement: Make a Plan for Your Sun Prairie Home
A recurring breakdown, uneven comfort, a leak, or a tripping circuit deserves a diagnosis before you commit to new equipment. Explain when the problem started, what has changed, and any previous repairs. The age of the equipment is useful context, but its condition and the cause of the problem matter too.
For a replacement or larger upgrade, ask how the proposed work fits the rest of your home. Heating and cooling equipment can depend on airflow and electrical capacity; water heaters depend on the available space, connections, and demand. Compare the recommended scope, expected maintenance, and available alternatives so you can make an informed decision.
Questions About Home Services in Sun Prairie, WI
Does installing an EV charger always require a panel upgrade?
No. The charger, existing service capacity, other electrical loads, and installation location determine what is needed. Have the electrical system assessed before buying equipment or assuming a newer Sun Prairie home already has enough capacity.
Does Action offer emergency service?
Action advertises 24/7 emergency service. Call (608) 291-9165, explain the issue, and confirm the availability and next steps for your address. Emergency service availability does not guarantee a specific arrival time.
What information should I have ready when I call?
Have your service address, the symptoms, and any accessible equipment details ready. Mention recent repairs and whether the problem affects one fixture or room, or the whole home. You do not need to diagnose the issue yourself.
Arrange Service in Sun Prairie, WI
Call (608) 291-9165 to discuss a repair, maintenance visit, or home improvement project with Action Plumbing, Heating, AC & Electric. Explain your priorities so the team can help you plan the next step.
Need help?
608-291-9165Recent Jobs and Reviews in Sun Prairie, WI
Sun Prairie, WI at a glance
Action Plumbing, Heating, AC & Electric has completed 20 jobs in Sun Prairie, WI between April 2026 and May 2026.
The most recent job was on May 8, 2026.
Action Plumbing, Heating, AC & Electric has completed 195 jobs in Sun Prairie, WI in the last 12 months.
Job Locations and Reviews
Responded to a repeat service call for a malfunctioning zone valve on a residential boiler heating system. Diagnosed a failed Erie zone valve pop top that was preventing proper zone operation. Replaced the defective Erie pop top with a new unit, restoring proper zone control and system functionality.
Completed comprehensive furnace clean and check, AC clean and check, and humidifier maintenance on newer HVAC system. Rinsed condenser coil thoroughly and verified system performance with subcooling measured at 11 degrees as specified by manufacturer requirements. Cleaned exterior components, inspected all equipment including furnace, air handler, and humidifier, and confirmed proper operation of digital thermostat set to heating mode.
Performed comprehensive air conditioning tune-up on residential Lennox condenser unit. Conducted thorough system cleaning and operational inspection, confirming proper refrigerant charge levels, capacitor functionality, and contactor operation. All components tested within normal parameters and unit operating efficiently.
Responded to dispatch for furnace making loud noise. Upon inspection, discovered the inducer motor was cracked and causing the operational noise. Replaced the defective inducer motor with new unit and performed complete furnace system checkup to ensure proper operation.
Performed comprehensive AC clean and check on outdoor condenser unit. Unit exterior and coils were found to be very dirty with significant dirt accumulation and discoloration throughout. Thoroughly cleaned condenser coils, cabinet panels, and all accessible components. Refrigerant charge was measured and found to be slightly high; adjusted to manufacturer specifications. Completed full system inspection and operational verification.
Installed approximately 30 feet of 2-inch PVC piping with necessary fittings to extend existing vertical condensate drain line from furnace. The existing vertical run from the furnace was already PVC, which was connected to the new horizontal routing that terminates at the building exterior with proper termination cap.
Performed comprehensive maintenance on residential air conditioning system and two gas fireplaces. Conducted thorough cleaning and inspection of outdoor AC condenser unit, identifying and replacing a failed capacitor. Verified refrigerant charge levels, which tested within acceptable parameters. Serviced both gas fireplace units, performing complete cleaning of burner assemblies and pilot assemblies to remove accumulated debris and ensure proper combustion. All systems tested and confirmed operational upon completion.
Responded to a no cooling call on a Magic-Pak HVAC system. Upon inspection, discovered a bent pin in the thermostat preventing the air conditioning from engaging while heating function remained operational. Straightened the damaged thermostat pin, restoring full system functionality and resolving the cooling issue.
Completed seasonal air conditioning maintenance inspection and cleaning. Performed temperature differential measurements across the system using digital thermometers, verified refrigerant pressures and system performance using manifold gauges with micron measurement capability. All system parameters found within normal operating specifications with no deficiencies noted.
Performed complete air conditioning check and cleaning on residential unit. System operational parameters verified using digital manifold gauges, confirming proper refrigerant pressures and superheat/subcooling temperatures within manufacturer specifications for R-410A system. Supply and return air temperatures measured with calibration-grade thermometers, showing appropriate temperature split across evaporator coil. All components inspected and found operating normally with no deficiencies identified. Routine maintenance completed successfully.
Performed seasonal startup and maintenance on residential air conditioning system. Replaced 20x25x5 air filter in unit and verified proper system operation with temperature differential readings showing appropriate cooling performance. Additionally replaced customer-provided sink filter as requested.
Performed seasonal start-up on residential air conditioning system installed in December. Customer reported no cold air delivery during initial operation attempt. Conducted comprehensive system diagnostics using digital testing equipment to verify electrical parameters and component functionality. Verified proper operation of outdoor condenser unit, confirmed adequate airflow through coil, and ensured system cycled correctly. Unit tested successfully with no issues found during start-up procedures.
Responded to no cooling complaint on first use of season for Goodman air conditioning system. Customer had already replaced furnace filter prior to arrival. Performed exterior coil cleaning by rinsing down condenser unit to remove accumulated debris. Tested contactor relay operation and confirmed proper functionality. Measured refrigerant charge and found system running low. Added refrigerant to bring system to proper operating levels and verified cooling operation restored.
Performed seasonal start-up on Lennox air conditioning condenser unit following recent installation. Verified refrigerant charge levels were correct and within manufacturer specifications. Secured armor flex conduit with wire ties to ensure proper cable management and protection of electrical connections.
Responded to no-cooling call at commercial salon location. Upon arrival, accessed outdoor condensing unit and indoor control panel to diagnose system failure. Inspected electrical components including capacitor, contactor, and control board connections. Verified all wire terminations at capacitor, contactor, and circuit board were secure and properly seated. Checked voltage supply and control circuit functionality. System restored to normal operation with cooling confirmed at thermostat.
Responded to no hot water complaint affecting third floor tenants. Upon arrival, accessed mechanical room and inspected boiler system and associated components. Found expansion tank showing significant deterioration with compromised insulation and surface degradation. Verified system temperature and pressure readings using existing gauges. Inspected connected piping, valves, and circulation components for proper operation. Documented equipment condition including analog thermometer readings and pressure gauge status. System components showed age-related wear consistent with older installation. Identified issues contributing to inadequate heat distribution to upper floors and provided recommendations for equipment replacement and system maintenance to restore proper hot water service to affected areas.
Responded to service call for dryer vent that was repeatedly disconnecting from overhead ductwork. Upon inspection, found the flexible dryer vent hose was inadequately secured and lacked proper extension to maintain a stable connection to the main ductwork system in the attic space. Extended the dryer vent run using additional flexible insulated ductwork to ensure proper reach and eliminate tension on the connection point. Secured all duct connections with appropriate fasteners and verified proper routing through the ceiling penetration. Ensured the insulated flexible duct was properly supported and sealed at the junction point to prevent future disconnection. Tested the installation to confirm secure attachment and proper airflow pathway from dryer to exterior vent termination.
Responded to service call for Goodman residential furnace producing ticking noise. Upon arrival, performed diagnostic inspection of unit to identify source of abnormal sound. Conducted visual examination of furnace components, burner assembly, heat exchanger, blower motor, and ductwork connections. Documented equipment condition with photographs showing unit in clean, well-maintained state with no visible external damage or deterioration. Further investigation and testing performed to isolate noise origin and determine appropriate corrective action.
Completed installation of new Lennox air conditioner and furnace system with reconnection to existing ductwork. Installed new refrigerant line set, concrete equipment pad, electrical whip and disconnect, and Wi-Fi thermostat. Ran new low voltage wiring to support thermostat communication. Upon startup, identified system was overcharged and adjusted refrigerant levels to manufacturer specifications, achieving proper operating temperatures of 41.3°F and 43.9°F at the evaporator coil. Both heating and cooling units tested and confirmed operational. Noted during inspection that overcurrent protection device is oversized for the equipment and vent/intake PVC piping requires additional support for code compliance.
Completed routine maintenance on furnace and air conditioning system. Upon inspection, discovered a rusted heat exchanger which poses a potential safety concern and will require replacement. System is operating quietly with no other operational issues identified at this time.
