Need plumbing, heating, cooling, or electrical help in Madison? Call Action at (608) 291-9165 to arrange service. Describe what has stopped working, where you see the problem, and whether you need an urgent repair or are planning an upgrade.
A century-old home near the Madison isthmus can have very different plumbing, heating, cooling, and electrical needs than a newer property on the far west side. Older homes around Williamson Street, Tenney-Lapham, Marquette, and Vilas may still rely on boilers, aging piping, older panels, or retrofitted cooling systems, while newer homes are more likely to need support for Heat pumps, EV chargers, and higher electrical loads. Action Plumbing, Heating, AC & Electric has served the Madison area since 1989 and maintains a local presence on South Midvale Boulevard.
Our technicians provide heating, air conditioning, plumbing, and electrical services throughout Madison, including ZIP codes 53703, 53704, 53705, 53711, 53713, 53714, 53715, 53716, 53717, 53718, and 53719. Whether you have an unexpected breakdown or are planning an upgrade, call Action at (608) 291-9165 or contact us online to schedule service in Madison, WI.
Find the Right Service for Your Home
A repair, a planned replacement, and routine maintenance call for different conversations. These starting points can help you find the service that fits what is happening at your property.
- No heat or unreliable comfort: Start with heating repair. For seasonal upkeep, explore heating maintenance.
- Warm rooms in summer: Explore AC repair or ductless options for spaces without existing ductwork.
- Leaks, drains, or hot-water trouble: Find leak repair, sewer and drain services, and water heater services.
- Planning an electrical upgrade: Review panel changes, EV charging, and backup generators.
Need help?
608-291-9165Local Home Services for Madison Properties
Madison’s housing stock changes considerably from one side of the city to another. Pre-1940 homes are concentrated around the isthmus and older central neighborhoods, while areas farther from downtown contain large numbers of homes built from the 1950s through the 1970s. Continued expansion toward Madison’s outer edges has also introduced newer construction with different HVAC, plumbing, and electrical demands.
That variety matters when diagnosing problems or planning upgrades. An older property near Atwood Avenue may have gone through several rounds of plumbing or electrical modifications, while a west-side home may be approaching replacement age for its furnace, central air conditioner, or panel. Action’s local Madison presence gives homeowners access to a team familiar with systems found throughout the city and surrounding Dane County communities.
Air Conditioning Services in Madison, WI
Madison summers can bring hot, humid stretches that place heavy demands on cooling equipment. Older homes around the isthmus, Marquette, Tenney-Lapham, and Vilas can be especially challenging because many were built before modern duct systems and whole-home cooling became standard. Action services traditional central air systems, Ductless mini-splits, and heat pumps for homes across the city.
Our Madison cooling services include:
- 24/7 emergency AC repair during Madison heat waves
- Air conditioning installation for older and newer homes
- Air conditioning repair
- Preventive AC maintenance before July and August heat
- Central air conditioning
- Ductless mini-splits for older Madison properties
- Heat pumps for efficient year-round comfort
- Indoor air quality services
- Commercial air conditioning throughout Madison
Heating Services in Madison, WI
Madison heating systems have to perform through long winters, repeated freezes, and cold snaps that can send temperatures well below freezing. Furnaces are common throughout the city, but boilers remain part of the housing landscape in older neighborhoods near Williamson Street, Marquette, Tenney-Lapham, and the isthmus. Heat pumps are also becoming a stronger option for homeowners interested in efficiency and electrification.
Action provides:
- Emergency heating repair during Wisconsin cold snaps
- Heating installation for Madison homes
- Heating maintenance before winter arrives
- Heating repair
- Furnace repair and replacement
- Boiler service for older Madison properties
- Heat pump installation and replacement
- Heat pump repair
- Heat pump maintenance
- Indoor air quality services for dry winter conditions
Plumbing Services in Madison, WI
Madison’s plumbing needs are shaped by housing age, groundwater conditions, and naturally hard municipal water. Homes near downtown, UW-Madison, and the near east side may contain piping that has been repaired, replaced, or modified several times, while mid-century homes throughout the city are also reaching an age where original pipes, drains, fixtures, and water heaters may need attention. Mineral-heavy water can also contribute to scale inside water heaters, fixtures, and water-using appliances.
Our plumbing services include:
- Emergency plumbing throughout Madison
- Plumbing repair for older and newer homes
- Leak detection for aging Madison plumbing systems
- Kitchen plumbing
- Bathroom plumbing
- Faucets and fixtures
- Commercial plumbing
- Gas lines
- Sewer and drain services
- Water heater repair and replacement
- Water softeners for Madison’s hard water
- Water filtration
- Piping and repiping for older homes
- Pipe replacement and repair
- Well systems in surrounding Dane County areas
Properties near Lake Mendota, Lake Monona, and the Yahara River corridor can also face drainage concerns during spring thaw and periods of heavy rainfall. Saturated soil and higher groundwater levels can place more pressure on basement drainage and sump systems, while aging plumbing can be more vulnerable to leaks or failures. Professional leak detection, drain service, pipe repair, and water treatment can help address those issues before they become larger problems.
Need help?
608-291-9165Electrical Services in Madison, WI
Madison homes are being asked to support more electrical demand than ever before. Older properties were never designed for today’s combination of central air conditioning, EV chargers, heat pumps, home offices, large appliances, and connected electronics. In established neighborhoods, that can make electrical capacity just as important as the condition of the equipment being installed.
Action’s electrical services include:
- Generators for Madison power outages
- EV charger installation for home charging
- Whole-home surge protection for storm season
- Electrical service upgrades for older homes
- Meter base and panel changes
- Interior and exterior lighting
- Dedicated circuits and outlets for modern equipment
- Equipment hookup and repair
- Commercial electrical services throughout Madison
For help planning an electrical upgrade, HVAC replacement, or another project that involves multiple systems, call (608) 291-9165 or contact Action online.
Why Madison Homeowners Choose Action
Action has served Madison and the surrounding area since 1989. That experience spans decades of neighborhood growth, changing building systems, and new home technology. The company also maintains a local Madison presence on South Midvale Boulevard.
Homeowners can turn to Action for:
- 24/7 emergency service
- Plumbing, HVAC, and electrical expertise
- Licensed and insured technicians
- Upfront pricing
- Water heater installation; ask about availability and offer conditions
- A 100% customer satisfaction guarantee
- Local service backed by decades of experience
Our goal is to identify the problem clearly, explain the available options, and provide a solution that makes sense for the home. That approach is especially important in Madison, where a house near Capitol Square can have very different systems and service needs than a newer property several miles west or east.
Schedule Plumbing, HVAC or Electrical Service in Madison, WI
A Madison home near Lake Monona may need help with drainage or aging plumbing, while an older property near the isthmus may be dealing with boiler heat, dated electrical infrastructure, or cooling challenges. Homes farther west and east may be approaching furnace or AC replacement or preparing for newer upgrades such as heat pumps and EV chargers.
Action Plumbing, Heating, AC & Electric has served the Madison area since 1989 and provides plumbing, heating, air conditioning, and electrical services throughout the city. Whether you need maintenance, repairs, replacement equipment, or emergency help, call (608) 291-9165 or contact Action online today to schedule service in Madison, WI.
Repair or Replacement: Make a Plan for Your Madison Home
A recurring breakdown, uneven comfort, a leak, or a tripping circuit deserves a diagnosis before you commit to new equipment. Explain when the problem started, what has changed, and any previous repairs. The age of the equipment is useful context, but its condition and the cause of the problem matter too.
For a replacement or larger upgrade, ask how the proposed work fits the rest of your home. Heating and cooling equipment can depend on airflow and electrical capacity; water heaters depend on the available space, connections, and demand. Compare the recommended scope, expected maintenance, and available alternatives so you can make an informed decision.
Questions About Home Services in Madison, WI
Can a Madison home with boiler heat add air conditioning?
Yes, a home without existing cooling ducts may be a candidate for ductless cooling. The right choice depends on room layout, insulation, available electrical capacity, and the equipment already in place. An assessment can compare options without assuming the boiler must be removed.
Does Action offer emergency service?
Action advertises 24/7 emergency service. Call (608) 291-9165, explain the issue, and confirm the availability and next steps for your address. Emergency service availability does not guarantee a specific arrival time.
What information should I have ready when I call?
Have your service address, the symptoms, and any accessible equipment details ready. Mention recent repairs and whether the problem affects one fixture or room, or the whole home. You do not need to diagnose the issue yourself.
Arrange Service in Madison, WI
Call (608) 291-9165 to discuss a repair, maintenance visit, or home improvement project with Action Plumbing, Heating, AC & Electric. Explain your priorities so the team can help you plan the next step.
Need help?
608-291-9165Recent Jobs and Reviews in Madison, WI
Madison, WI at a glance
Action Plumbing, Heating, AC & Electric has completed 20 jobs in Madison, WI in January 2026.
The most recent job was on January 24, 2026.
Action Plumbing, Heating, AC & Electric has completed 616 jobs in Madison, WI in the last 12 months.
Job Locations and Reviews
Diagnosed no heat issue on older Carrier furnace. Found thermostat malfunction causing system failure to initiate heating cycle. Accessed furnace control board to verify power supply and component functionality. Repaired thermostat wiring connections and recalibrated temperature settings, restoring normal heating operation.
Responded to no heat complaint in room 402. Diagnosed air trapped in heating line of cast iron radiator. Successfully bled air from the system and verified proper operation of the radiator. Confirmed thermostat was functioning correctly and set to 60°F heat mode.
Responded to customer complaint of unusual odor and no heat from 2014 Ameristar furnace. Diagnosed bad blower motor causing system failure. Replaced defective motor assembly, cleaned interior components, and verified proper operation with successful test cycle. Unit now functioning normally with no odor present.
Performed diagnostic service on 2013 Lennox furnace system not maintaining temperature (57°F with thermostat set to 90°F). Conducted basic clean and check maintenance, including inspection of internal components, wiring, motor, and control board. System appears properly installed with appropriate gas connections and ventilation. Recommended further monitoring of heating performance.
Responded to service call for furnace short cycling and no heat. Performed diagnostic temperature testing with digital thermometers to verify system operation issues. Identified dirty filter as root cause. Customer advised to replace filter to restore proper furnace operation.
Responded to customer complaint of strong chemical odor emanating from furnace. Performed diagnostic inspection and identified air freshener in return air as source of odor. Completed standard clean and check service on 10+ year old unit, including inspection of internal components which showed normal dust accumulation. Tested system operation with diagnostic equipment to verify proper functionality.
Diagnosed and resolved Lennox furnace high limit condition. Found severely restricted airflow due to clogged filter which was causing system to overheat and cycle off prematurely. Replaced filter, cleaned unit, and verified proper operation with normal temperature differential. System now maintaining desired temperature without requiring excessive thermostat setting.
Successfully reinstalled customer's existing Aprilaire Model 700 automatic humidifier that was previously hanging by the water line. Mounted unit securely to the furnace ductwork, reconnected electrical components using proper wire connections, and verified system operation.
Diagnosed Goodman gas furnace with no heat issue. Visual inspection revealed faulty control board. Sourced and installed replacement Emerson control board, reconnected all electrical terminals, and verified proper operation. System is now functioning correctly with heat restored.
Responded to tenant complaint of no heat. Upon inspection, found system operating with heavily soiled air filters. Replaced Bryant filter (size 13.1) and verified thermostat function. Thermostat was set to 67°F with interior temperature reading 56°F. System resumed normal heating operation after filter replacement.
Responded to no heat call but found furnace operational upon arrival. Performed standard clean and check service on Payne furnace system located in basement. Inspected venting, ductwork connections, and associated plumbing components; all systems functioning properly.
Responded to service call for first floor units not operating properly. Diagnostic testing with Klein ET10 thermometers revealed system was low on refrigerant charge. Second floor Fujitsu Halcyon HFI units were successfully restored to operation. First floor units require follow-up service appointment for refrigerant recharge to restore heating function.
Responded to no heat complaint at RTU. Diagnosed issues with restricted airflow due to severely clogged filters and return grilles. Installed new filters and removed grilles for customer cleaning. Visual inspection revealed significant rust and corrosion on evaporator coils, indicating potential long-term moisture exposure requiring future attention.
Responded to emergency call for suspected gas leak following recent vent cleaning. Performed comprehensive inspection of 15-year-old Bryant heating system and water heater installation. No active gas leak detected; recommended heat exchanger inspection which homeowner declined due to recent system cleaning.
Responded to no heat call at commercial office for 20+ year old system. Diagnosed failed inducer motor, evidenced by compromised copper windings visible through ventilation slots. Installed replacement Fasco inducer motor, restoring system function. Advised customer about discussing furnace replacement with landlord due to system age.
Responded to no-heat call for 2003 model furnace. Upon inspection, removed front panel to access internal components including blower motor assembly, control board, and heat exchanger. Diagnosed and serviced the system, restoring proper heating function.
Responded to service call for 2008 gas furnace producing humming and loud noise during operation. Inspection of unit revealed failing inducer motor, which was confirmed by inspection of FASCO motor assembly. Replacement of inducer motor was recommended to resolve the issue.
Responded to service call for non-operational boiler. Diagnosed issue with tarnished wires at thermostat connection. Cleaned corroded thermostat wires and cycled unit multiple times to verify proper operation was restored.
Responded to no-heat call for Spanish-speaking customer. Diagnosed faulty fan control board outputting only 9V. Replaced control board (sourced from AUESTEEL) and installed new thermostat, restoring proper furnace operation and heat function.
Diagnosed no heat complaint on 25-year-old furnace with power but failing to ignite. Inspection revealed faulty inducer motor preventing proper ignition sequence. Unit shows significant deterioration and requires complete replacement due to age and condition.
